3 x 48 m³ aluminium silos, diameter 2,400 mm

Zeppelin

Year of construction: 1983, condition: ready for operation (used), Various mixing and storage silos are available. 1) Stainless steel silo. 2) Stainless steel silo Zeppelin, year of construction: 1983, capacity: 32m³, friction angle range: 25°-45°, overpressure range: 5mbar-45mbar, max operating temperature: 50°C, bulk density: 0.6kg/dm³, silo height: 11250mm, silo diameter: 3000mm. 3) Stainless steel silo. 4) 3x identical HD-PE mixing silos, total height: approx. 10500mm, diameter: 3000mm, volume: approx. 49.5m³, mixing pipes: NW 150, motor power: 15kW. 5) 2x identical storage silos Zeppelin, year of construction: 1980, volume: 127m³, capacity: 119m³, silo diameter: 3500mm, inclination angle: 15°, hopper height: 1680mm, support ring height: 3700mm, total height: 17500mm. Documentation available. An on-site inspection is possible. Individual sale possible. Redpsxxl I Uefx Afcep

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 m height The plant is designed so it can be easily expanded with a second 15 kW press. Rodpoxv Dkcofx Afcep The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us.

Condition: excellent (used), functionality: fully functional, Aluminum flour silo with extended base ring (used), designed for a bulk density of 0.8 kg/dm³ Volume: 56,000 liters Available units: 1 Diameter: approx. 2,400 mm Cylindrical height: approx. 15,000 mm Total height: approx. 16,500 mm (incl. roof perimeter safety railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Equipment and connections: Top head: - 1 x pressure/vacuum relief valve - 1 x venting filter add-on - 1 x flange for filling pipe - 1 x flange for level measurement - 1 x flange for pressure transducer - 1 x flange for level indicator Rjdeyhznzepfx Afcsp - 1 x roof perimeter safety railing with handrail - 2 x lifting lugs Silo shell: - 1 x access door 850 x 1800 mm - 8 x pipe brackets ø 108 mm for filling pipe - 1 x filling pipe DN 100, ending at TW connection at the bottom - 1 x cable protection pipe DN 50 - Various pipe penetrations in the area of the lower base ring The silo features a 40° conical bottom, terminating in a DN 1500 flange for fitting a vibrating floor. At the bottom/cone: - 1 x block flange for empty indicator - 1 x vibrating floor The currently installed measuring and control technology is included in the above offer, but no guarantee is given for its functionality! Otherwise, as per images and drawing.

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Flour silo / sugar silo made of aluminum with extended support skirt (used), designed for a bulk density of 0.95 kg/dm³ Capacity: 70,000 liters Available quantity: 4 Diameter: approx. 2,400 mm Cylindrical height: approx. 17,500 mm Total height: approx. 19,200 mm (including roof edge railing) Material: AlMg3 Bulk density: 1.0 kg/dm³ Features and connections: Top (roof): - 1 x manhole DN 600 with cover - 1 x pressure/vacuum relief valve - 1 x vent filter attachment (ø 1000 x 5 mm) - 1 x flange DN 125 for fill pipe - 1 x flange DN 50 for pressure transmitter - 1 x roof edge railing with handrail - 2 x crane lifting lugs Rsdpfx Afsyhzm Recop Shell (side wall): - 1 x bursting disc fitting (approx. 920 x 586 mm) - 1 x access door 850 x 1800 mm - 8 x pipe clamps ø 108 mm for fill pipe - 1 x DN 100 fill pipe, terminating at the bottom in a TW connection - 1 x cable protection pipe DN 50 - 1 x block flange for level sensor - Various pipe passages in the lower support skirt area The silo features a 40° discharge cone at the bottom, ending in a DN 1500 flange for mounting a vibrating base. At the bottom/cone: - 1 x vibrating discharge base VB 1400 with motor, manufacturer AZO - 1 x block flange for empty detector The currently installed control and measurement technology is included in the above offer, but no warranty is given for its functionality. Otherwise, as per pictures and drawings.

Condition: used, Technical Data / Dimensions Available Quantity: 2 Volume: approx. 115,000 liters Container Type: Silo Condition: Used Food Grade: No Design: Vertical Internal Diameter: approx. 3,000 mm Cylindrical Height: approx. 15,600 mm Total Height: approx. 18,000 mm Weight: approx. 2,700 kg Specific Weight of Medium: 0.6 t/m³ Operating Pressure: Unpressurized Ground Clearance: approx. 1,000 mm Material / Properties Inner Casing Material: Aluminum Notes: Material: AlMg3 / AlMgSi Standing Type: Base Ring/Stand Frame Fastening: Fixed Top Bottom Type: Conical Grade: approx. 15% Bottom Bottom Type: Conical Conical Inclination: 90 degrees Top Bottom: 1 x Roof edge railing, height: 1,200 mm 2 x crane eyelets 1 x flanged connection DN 80 (filling) 1 x flanged connection for silo pilot 1 x venting connection Various connections for measurement and control technology Shell: 1 x service room door (approx. 1,800 x 850 mm) 1 x cable conduit 1 x filling line DN 80 Rsdpfswfrgyjx Afcjp 8 x pipe holders Subfloor: The silos end at the bottom in a 90° cone with a flange

Condition: excellent (used), Year of construction: 2007, Zeppelin Diesel Genset Type: PPO2000 - C32 Rsdoizbdajpfx Afcop Serial No.: ZPSU1023; Arr.No: 273-9683; Year: 2014; Voltage [V]: 400; Rating [kW]: 1600; Rating [kVA]: 2000; speed [RPM]: 1500; Frequency [Hz]: 50; SMU [hrs]: 0; Application: prime; Layout: Canopy; condition: pre-owned; Notes: Diesel Engine 2 * CAT C32 PPO, new Stamford HC6J alternator, with ComAp automatic Panel Inteli Compact, 2 x circuit breaker, 4000 L in two fuel tank, Jacketwater heater. L/W/H: 11 m,/ 2,3 m/ 3,2 m, weight. 26t, Import duty unpaid.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Aluminum silo standing on foot ring (plastic granulate (PP) storage silo) - second-hand - designed for a bulk density of 0.8 kg/dm³ Volume: 120,000 liters Available quantity: 1 Diameter: approx. 3,000 mm Cylindrical height: approx. 20,000 mm Total height: approx. 21,250 mm (incl. 1,250 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Roof pitch of the upper floor: 15° Equipment and connections: In the top floor: 1 x DN 600 access and ventilation opening with cover 2 x flange DN 100 (filling spout + Silopilot) 1 x 1 1/2" threaded socket (full detector) 1 x roof edge railing with handrail 2 x crane eyes Rodpfx Afju I U D Sscsp In the shell: 1 x access door 850 x 1800 mm 9 x pipe holder ø 108 mm for filling pipe 1 x DN 100 filling pipe, ending in TW connection at the bottom 1 x cable protection pipe DN 50 Various pipe penetrations in the area of the lower standing frame The silo has a 60° cone at the bottom, which ends in a DN 500 flange. On the underside/cone: 1 x suction cost 1 x 1 x 1 1/2" threaded socket (empty indicator) The currently connected measurement and control technology is included in the above offer. However, no warranty is given for their warranty is assumed! A three-part access ladder with back protection is optionally available (surcharge: € 1,950) Otherwise as per pictures and drawing.

Year of construction: 2004, condition: used, functionality: fully functional, Silo Manufacturer ZEPPELIN Content 10m³, height 2.50m, diameter 2.0m Year of manufacture 2004 The system is available 3 times Subject to prior sale Please send inquiries by email only Note: The machine/unit is still installed and can be inspected on site. Rsdpfsualkkjx Afcep The buyer must remove it himself and organize shipping. This is not part of the offer price.

Condition: used, Backhoe bucket, excavator bucket, demolition bucket, trenching bucket -Execution: very stable -Width: 850 mm -Height: 1060 mm -Depth. 1600 mm -Zeppelin quick change adapter NADO -ripping teeth -Number: 2x excavator buckets available -Price: per piece -The mounting on the spoon can be changed by us at an additional cost -Dimensions: 850/1600/H1060 mm Rsdpfx Afsckuz Iocjp -Own weight: 600 kg

Year of construction: 1979, condition: good (used), 1 x 90 m³ aluminum silo with extended base ring and filter housing, ø 3,000 mm. Designed for a specific gravity of 0.6 kg/dm³ (formerly used as a flour and starch silo). Manufacturer: Zeppelin Capacity: approx. 90,000 liters Diameter: approx. 3,000 mm Total height: approx. 15,950 mm + 1,200 mm guard rail Weight: approx. 4,000 kg Specific gravity: 0.6 kg/dm³ Material: Aluminum AlMg3 Food grade: yes Insulation: approx. 100 mm mineral wool with bolted cover sheet (cover sheet partially damaged, but can be repaired by us). Connections and fittings: Rodpfx Aegig D Dsfcjp On the silo roof: - 1 x circumferential roof guard rail (ø 1,800 x 1,200 mm) with two access openings - 1 x hinged manhole with protective grid DN 600 - 1 x access ladder to filter housing - 2 x crane lugs In the filter housing: - 1 x flange DN 100 for filling line - 4 x vent openings DN 600 with filter bags - 3 x connection ports for control/measurement technology On the silo shell: - 1 x ventilation grid (filter housing) - 1 x filling line - 1 x personnel door (approx. 1,850 x 800 mm) The silo terminates in a 60° cone NW 1500 with inspection opening. The cone is equipped with a fluidized bed (compressed air) and a rotary valve. The silo is not equipped with rupture discs or explosion protection devices. For further details, please refer to the technical drawings and images.

Condition: used, operating hours: 1,500 h, total width: 19,900 mm, total length: 36,200 mm, total height: 17,600 mm, fuel: diesel, overall weight: 1,600 kg, 2 independently configured emergency power generators EA 1.8-2x2.5 KVA, Zeppelin-Metallwerke, diesel powered, 1x 1553 operating hours, 1x 1135 operating hours, total weight 1600 kg, mounted on single-axle chassis with truck towing device, crane loadable, video (in operation) available – can be provided upon request, German registration, operating hours as per display. Vehicle preferably sold to commercial users or for export, private sale subject to reservation. Sold without warranty. The above information is non-binding; errors, changes, and prior sale reserved! Phone: 08026/2188 Rjdpsx Edbgsfx Afcsp

Condition: excellent (used), 4 x aluminium silos with extended support skirt + filter house, ø 3,000 mm, designed for a specific gravity of 0.6 kg/dm³ Manufacturer: Zeppelin Capacity: approx. 80,000 l Diameter: approx. 3,000 mm Total height: approx. 16,000 mm Weight: approx. 2,000 kg Specific gravity: 0.6 kg/dm³ Connections and fittings: On the silo top: 1 x crane eye In the filter house: 1 x filter frame, approx. 900 x 1,000 mm with vent connection Rodpfx Asgh Dgbofcop 1 x manhole DN 600 3 x connections for control/measurement technology (incl. silo pilot, min-max level indicator, and additional probes) On the shell: 1 x access door with lock to the filter house 1 x inspection door (cone section) 1 x signal lamp Various openings for filling lines The silo bottom ends in a 60° cone NW 1500. Discharge from two silos is via vibrating floor (see picture). 3 of the silos are equipped with a double-run ladder with back protection.