Imagesetter

AGFA Avantra 25 WE - refurbished 2024

Condition: good (used), Year of construction: 1996, AGFA Avantra 25 OLP in great condition. With 2 Supply-Cassettes and Online Developer with Taipan-Rip PostScript III. System is completly cleaned and checked. Resolution: 1200, 1800, 2400 and 3600 dpi - max. image area: 44,9 x 63,5 cm - including Techkon Densitometer for film. Refurbished 2024 in Germany. Eltvre3

Condition: good (used), AGFA Avantra 30 with AGFA Rapiline Online Developer in great condition. Resolution: 1200, 1800, 2400 and 3600 dpi - max. image area: 75,4 x 63,5 cm - including Techkon Densitometer for film. Refurbished 2024 in Germany. N7J9Nocha

Condition: good (used), Year of construction: 2000, AGFA Avantra 44 short OLP in great condition with Rip. 2Koyw2Zct You can choose as Rip: AGFA PDF-Rip or HQ-Rip. Resolution: 1200, 1800, 2400 and 3600 dpi - always serviced by Agfa, Complete System installed 2000.. - Avantra 44 with 1200, 1800, 2400 and 3600 dpi - max. image area: 90,6 x 113 cm - AgfaLine 44 - short Online Processor - Agfa PDF-Rip or Harlequin-Rip System with Service-contract - complete tested and cleaned. Refurbished 2024

Condition: refurbished (used), Year of construction: 2000, AGFA Phoenix 2250 with Online Developer in great condition. Resolution: 1200, 1800, 2400 and 3000 dpi - max. image area: 570 × 736 mm - including Techkon Densitometer for film. Refurbished 2024 in Germany. E89Mtxn

Condition: used, Powersupply for AccuSet - see all details in the picture. The Powersupply is tested and checked - 2024 in Germany. N2Is98Wht

Year of construction: 2015, Condition: reconditioned (used), Agfa Avantra 25,30,44 Spinners -Agfa Avantra 25 spinner, 25.000 RPM, 20.000 RPM -Agfa Avantra 30 Spinner, 30,000 RPM -Agfa Avantra 44 spinner, 13,500 RPM -Agfa GalileoCTP Spinner, 37,500 RPM Bjnrctrqud

Year of construction: 2016, Condition: reconditioned (used), Rational SCC61E WE combi duo with vent. Unit after renovation. Ready to work. Dplgpd

Year of construction: 2003, Condition: excellent (used), Agfa Avantra 44XT 2 cassettes With online processor (Kuze bridge) Bkkosnna Year of construction 2003

Condition: new, Year of construction: 2024, Functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of cooling: air, overall weight: 433 kg, total width: 860 mm, total length: 2,050 mm, total height: 1,660 mm, warranty duration: 6 months, heating capacity: 25 kW (33.99 HP), AIRCOOLED CHILLER/HEAT PUMP EMICON PAE 361 KA 22 / 25 KW Cooling capacity: 22 kW / 6.3 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.1 tons (40/45 — 7°C) Year of manufacture: 2024 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper-aluminum Dqwnwh Type of refrigerant: R134a Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Number of fans: 2 psc. Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Never used, new

Condition: refurbished (used), Year of construction: 1999, Clamping force: 420 t Screw diameter: 60 mm Tie bar distance: 710x800mm Min/Max mould height: 380/820mm Bry8Jzk3Duo Hydraulic cores 2 Machine has new barrel screw etc Sealings New pump, motor Completely refurbished

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Y axis working area: 4300 mm Main Electrospindle power: 12 KW Ch9Odg8Gpa Number of controlled axes: 4 axes Total number of tool changer positions: 28

Condition: used, Year of construction: 2014, Agfa AZURA CX125 washout unit Bse3Jm0Naka Plate format up to 125 cm Optimized for Agfa Azura TS thermal plates Water-based cleaning with rubber-based sealing

Year of construction: 2016, Condition: reconditioned (used), The price refers to an appliance built in 2016, more recent years and options such as external osmosis etc. are available on request! Even wider, even higher. This is how the premium-class DV 125.2 universal washing machine presents itself. The new universal washing machine washes dishes, transport baskets, GN kitchen containers, pots, cutlery, trays and even glasses. Thanks to its large usable space - clearance height 555 mm - even dishes measuring 650 x 530 mm (2/1 Gastronorm) can be washed hygienically. This makes it the ideal dishwashing partner for butchers and bakeries, as well as being universally applicable in communal catering and as a gastronomy dishwasher. Dimensions Width 735 mm Depth 750 mm Height 1590 mm Height with hood open 2200 mm Insertion height 555 mm Basket dimensions 500×500 / 650×500 mm Capacity Program run times * 60 / 90 / 210 sec. Theoretical basket capacity 60 / 40 / 17 / h Pump motor 1.5 kW Tank filling 26 ltr. Rinse aid 3.2 ltr./basket Tank heating 2.0 kW Built-in boiler 10°C inlet temperature 9 kW 45°-60°C inlet temperature 7.5 kW Total connection Three-phase current 3NPE 400 V~ 50 Hz, 10°C inlet temperature 12.6 kW Three-phase current 3NPE 400 V~ 50 Hz, 45°-60°C inlet temperature 11.1 kW Protection class Protection class IPX5 * When connected to cold water and/or short basket change times, the running times for achieving hygienic rinse temperatures may increase! 1 year warranty on electronic parts, if installed correctly! Dqnpuf Insured shipping via a forwarding agent, stating your delivery address and your local contact person (telephone notification) is possible!

Year of construction: 2014, Condition: good (used), Functionality: fully functional, machine/vehicle number: MP-1406-90, Die Anlage hat einen Einschneckenextruder mit einer Ausbringung von max. 120 kg/h. The Schneckendurchmesser ist 90mm. Auf der Anlage wurden PVC Profil-Rohre bis zu einer Breite von 225mm und einer Höhe von 90mm hergestellt. Die Anlage ist voll funktionsfähig. Sie wird durch eine neue, mit einer grösseren Ausbringung, ersetzt. Dqmpir The Werkzeuge und Calibratoren are not included in the Anlage

Condition: new, Year of construction: 2024, Functionality: fully functional, This UV digital flatbed printer replaces the common laser printers - also color prints on glass, wood, textiles, plastic, metal and many other materials C M Y K + W + lacquer option New model: PS2513P Air Table / Vacuum Table Print head: Epson TX800 8 Pass 6 Pass 4 Pass with a huge square meter of print area per hour! 1440 dpi max. Including software for printer and image processing Dimensions: 2.85*1.9*74*1.55m weight: 850kg size 250x130cm and 120mm print height Expandable with long round pressure function unit for bottles Bhwwxvqvzq With operating display Automatic material height sensor

Year of construction: 2015, Condition: excellent (used), Clean-out unit Agfa Azura C 125 (without stacker) Y/M: 2015, – max. plate width: 1250 mm – One clean/gum finisher solution that cleans and gums the plate in one operation – Environmentally friendly finisher solution – Plate width, min.-max.: 200-1250 mm (7.9-49.0”) – Plate length: min. 310 mm (11.8”) – Platesetters: (Agfa) Avalon N8, N16 – Plate speed 60 cm/min (23.6”/min, fixed) – Plate throughput: 37 plates/h (landscape 745 x 605 mm or 26 plates/h (portrait 1030 x 790 mm) – Plate volume: Up to 10,000 m²/year – Brush speed: 150 rpm (fixed) – Dryer temperature: 55°C (131°F, not adjustable) – Noise emission – Max.: < 70 dB – Dimensions (width, length, height): 1820 x 2050 x 1050-1200 mm (71.6 x 81 x 41.3-47.2”) – Uncrated weight: 210 kg (463 lb) – Single phase 1W + N + PE 230V / 6 Amps, 50/60Hz or Single phase 2W + PE 208 – 230V / 6 Amps, 50/60Hz – Power consumption EUR/US: 1350 Watt-hour F8Elp7R9 Very good condition. Availability: immediately

Condition: used, Functionality: fully functional, machine/vehicle number: AJ21460A, We are selling here in quantity 2 stackers from Agfa from the Elantrix series. Ijwtymkfa They work perfectly and can be picked up immediately. Our price per piece is 2500,-€ on negotiation basis.

Year of construction: 2013, Condition: excellent (used), machine/vehicle number: 2525797057901, • CMYK + Lc Lm + 2 x White • White in the pre- and postprint Bnm2Bo70 • Speeds up to 45 m²/hr. (500 ft²/hr) • Max. print size 2,54 x 1,54 m • Substrates up to 4,5 cm (1.77 in) thick. • Multiple board printing • Borderless printing • Shuttle safety sensors • For Digital Printers, Poster printers and Mid-Size Graphic Screen Printers

Year of construction: 2014, Condition: good (used), Functionality: fully functional, machine/vehicle number: MP-1406-90, The extruder is a single-screw extruder with an output of max. 120 kg/h. The screw diameter is 90 mm. The screw diameter is 90 mm. PVC pipes up to 150mm were produced on the line. The line is fully functional. It has been replaced by a new one with a larger output. Cun30Zf9Do

Condition: new, Year of construction: 2024, Functionality: fully functional, This UV printer replaces the common laser printers - also coloured prints on glass, wood, textiles, plastic, metal and many other materialsC M Y K LC LM W VNew model: PS2513Air TablePrint head: Epson TX8002690 dpi max.Including software for printer and image processingDimensions: 2.85*1.9*74*1.55mWeight: 800kgSize 250x130cm and 70mm Print Height possible8x500ml Colour can be supplied! (Surcharge) LACK FUNCTION INCLUSIVE software Adjustment and printer explanation on request. Germany/Europe-wide. (Surcharge)Print videos etc. can be sent by Mail/WhatsApp... Cop8Ivx

Year of construction: 1999, Condition: excellent (used), Control Siemens 840 D Travel X / Y / Z 1800/425/400 mm Tool magazine for 36 tools SK40 Fiddhjh2I Spindle Speed 5,000 rpm Clamping surface 2560x450 mm Chip conveyor

Condition: used, Year of construction: 1979, Functionality: fully functional, working width: 250 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 160 mm, overall weight: 10,000 kg, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: mechanical, planer shaft diameter: 50 mm, type of input current: three-phase, table length: 1,000 mm, number of spindles: 9, frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 65 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-left (11 kW) Jytnaq 4-Left (7.5 kW) 5-Right (7.5 kW) Bilm0Iaezj3 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Condition: used, working width: 250 mm working height: 160 mm spindles: 5 spindle 1: Bottom (7.5 kW) - Counter bearing spindle 2: Right (11 kW) spindle 3: Left (11 kW) Dzrj8Ru97F spindle 4: Top (15 kW) – Counter bearing spindle 5: Below feed: 15 kW control: ATS system Driven table rollers: Yes Powered table rollers: Yes Table tops: Sanded and recoated High-speed planing and moulding machine Weinig H25 R for four-sided planing and profiling of wet wood (freshly sawn) The machine is in the workshop and will be completed after ordering. Sample images, illustration similar.

Condition: good (used), Technical data for the shelf connector: Shelf system: Stow Type: Pal Rack NS Djzbfr Included in delivery are: 01x shelf connector, used for shelf distance: 250 mm total length: 250 mm cross section: U 35x25 mm material thickness: approx. 2,00 mm material color: sendzimir galvanized Drill hole diameter: 11 mm Weight: 0,330 kg | pcs. 02x screws M10 x 35 mm 02x nuts M10 General information about the article: This article is only offered for pickup. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: excellent (used), working width: 250 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 140 mm, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: hydraulic, type of input current: three-phase, number of spindles: 9, frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2-Right (9 kW) 3-left (11 kW) 4-Right (9 kW) 5-Top (15 kW)- with hydraulic clamping 6-Bottom (7.5 kW) - with hydraulic clamping 7-Top (7.5 kW) - with hydraulic clamping and straight jointer 8-Top (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer Mnntpqk2Gj 11 driven rollers in the table