Vertical Jacketed Tank 8.000 L

Alfa Laval

Condition: used, Year of construction: 1994, Available from May Pgsdpfx Aoyxl R Ejfpoi Name: Used mobile sludge dewatering system in container Manufacturer: Alfa Laval Type: AVNX 919 Year built: 1994 Max. bowl speed: 3.250 rpm Material: Stainless steel Inner diameter drum: 353 / 202 mm Permissible sediment density: 1,2 kg / dm3 Dimensions: L 7.500 x W 2.450 x H 2.550 mm Empty weight: Approximately 6-7 tons Technical doc.: Yes Message: Available from May Accessories: Container, polymer plant, feed pump, control cabinet, macerator, discharge conveyor Condition: Second hand Price: On demand

Condition: used, Item: AV-11841-Vertical40m3tank Pedpsi E Abiefx Afpsgi Used vertical tanks, capacity 40.000L Exterior dimensions: Dia Ø 3200/3400 mm Total H 9600 mm incl. gear. Cylinder height: 7200 mm. Vertical stainless steel tanks - 3 pcs. Insulated with 100 mm rockwool completed with flat plate. Conical bottom 35 degrees with 4" outlet. Klöffer top with manhole. Powerful top mounted agitator. 37 kw agitator. AISI 316.

Condition: used, Year of construction: 2017, functionality: fully functional, overall weight: 350 kg, total length: 4,638 mm, total height: 532 mm, total width: 1,628 mm, lamellar spacing: 7 mm, operating pressure: 10 bar, power: 24.5 kW (33.31 HP), pressure: 10 bar, Alfa Laval Arctigo ID Evaporator / Unit Cooler – 4× EC Fans (3-Phase) – 2017 – 2 units available / price per unit. Short Description: Industrial air cooler / evaporator, dual discharge, blow-through design, fully functional. Equipped with 4 EC fans (ZIEHL-ABEGG), electric defrost, copper/aluminum coil, suitable for brine applications. Technical Specifications Parameter Value Model IDB24-28-CU-W10-AL7.0-2H Serial Number 3289109271 Psdpfsywctuox Afpjgi Application Medium Brine / glycol solution Coil Material Copper / Aluminum Number of Coil Rows 8 Fin Spacing 7.0 mm Max Working Pressure 10 bar Test Pressure 14 bar Coil Temperature Range −60 °C to +110 °C Recommended Room Temp −40 °C to +20 °C (typical application) Fans 4× EC, 3-phase, 400 V AC, 50–60 Hz, ZIEHL-ABEGG Max Fan Power 24.5 kW Protection / IP IP54 ICC 10 kA Electric Defrost Tubular heaters installed Condensate Drain 1½" Weight (approx.) 350 kg Dimensions (L×W×H) 4638 × 1628 × 532 mm Mounting Points M1, M2: 2000 mm Cooling Capacity Dependent on operating conditions (air & brine/glycol temperature, flow rate). Suitable for industrial refrigeration / freezer applications. Condition Fully functional; coil and fins in good condition Minor cosmetic oxidation on copper pipes (normal) Sold as used equipment Documentation Wiring diagram / electrical documentation: Drawing No. 9460151524 Manual and technical datasheet available on request Location / Pickup Prostějov, Czech Republic Loading / shipping can be arranged

Condition: used, PUMP, Alfa Laval Type MR-200A Q – 35 m³/h Pressure 14 mwc Self-priming pump Pgsdpfxjyv Ey Ue Afpji

Condition: used, functionality: fully functional, usable tank capacity: 15,000 l, Item: AV-12052-AV12053-Vertical-Tank-15000L Exterior dimensions: Dia Ø 2300 mm Total H 5500 mm. Vertical stainless steel tanks - one piece to offer Conical bottom 35 degrees with 4" outlet. Pjdpfx Afeq A R S Djpsgi Conical top 15 degrees with manhole. AISI 304.

Year of construction: 2009, condition: ready for operation (used), A complete plate heat exchanger pasteurization system Alfa Laval, consisting of four sections, is available. Product: 13% whole milk, throughput capacity: 25000kg/h, total capacity: approx. 2000kW, volume: 588l, max. pressure: 10bar, max. temperature: 120°C, test pressure: 14.3bar, number of plates: 338, expansion option: 82 plates, heat transfer area: 210m², plate thickness: 0.6mm, gasket system: Clip-On, gasket material: NBRFF, total pressure loss on the product side: 422kPa, heat exchange stages: regeneration/heating/intermediate stage/cooling, plate pack length: 1856mm, carrying bar length: 3600mm, tightening bolt length: 3560mm. Overall system dimensions X/Y/Z: approx. 3850mm/850mm/2200mm, weight: approx. 2850kg. Documentation available. An on-site inspection is possible. Pgedpsyvuuusfx Afpei

Condition: ready for operation (used), 30 kw main drive 3250 rpm 1.2 kg /dcm. exelent conditions Pgedpfx Ajx Aurksfpei

Condition: excellent (used), functionality: fully functional, Item: AV-12421-Vertical-12000L Jacketed Insulated Vertical Tanks Psdpfxernuhps Afpjgi Dimensions: Dia Ø 2600 mm Total H 4400 mm. Stainless steel tank - 4 pcs. identical Manhole at top, conical top with ventilation and conical bottom 15 degrees with 2" outlet. Scrape agitator with gear AISI 304

Condition: used, Year of construction: 2019, Overview  This centrifuge was manufactured in 2019 by Alfa Laval. The CLARA 250 is designed for beer processing in beverage production. The machine is still installed and can be visited in production on request. It is available immediately. Technical data  Capacity: 80 HL/h – 150 HL/h Application: Beer Operating hours: 1,800 h Pgodoyuc Ulspfx Afpji

Year of construction: 2011, condition: used, Condition: used Location: external storage Type: MRPX 810CA-SK Year of manufacture: 2010 Max. bowl speed: 6,250 rpm Motor speed: 1,500 rpm Internal bowl diameter: 438 mm Min./Max. process temperature: 0 / 100°C The separator is offered without the "bowl"; this can be purchased separately from Alfa Laval for €60,000. The separator is in as-new condition and has zero operating hours. Full documentation is available. Product data Overall height: 2,005 mm Overall length: 2,450 mm Overall width: 1,305 mm Remarks Pedpfeyr I Rasx Afpogi The fully hermetic separation system MRPX 810 is designed for the removal of suspended solids with particle sizes from approximately 0.5 to 500 μm from a liquid phase with lower density than the solids. The solids content is typically in the range of 0.1–20 vol.-%. The main applications are bacteria, rDNA products, enzymes, cell cultures, and vaccines. It is also suitable for industrial fermentation processes using microbial cells for the production of acids, chemicals, fuels, etc. Applications requiring low oxygen uptake can also benefit from the hermetic design features of the MRPX 810 separator.

Condition: good (used), - Material: AISI 316 stainless steel - Standing on feet - Tanks, above, adapted to the cellar vault Psdpjvlkgaefx Afpsgi Dimensions : - Width: approx. 1150 mm - Depth: approx. 1800 mm - Total height at rear: 2500 mm - Total height at front: 3650 mm (including dome) - Ground clearance: 340 mm Equipment: - Rectangular door 320 x 420 mm - Total drain: flap valve DN 40, Friedrich no 2 - Residual drain: flap valve DN 40, Friedrich no. 2 - Taster - Level indicator - Dome DN 200

Condition: excellent (used), For sale – Alfa Laval plate heat exchanger x2 + 1 NN An Alfa Laval plate heat exchanger is offered for sale. This is professional industrial equipment, previously used in food processing production. Specifications: Manufacturer: Alfa Laval Type: Plate heat exchanger Designed for milk and other liquid food products Stainless steel plates (food-grade standard) High heat transfer efficiency Dismountable for easy cleaning Suitable for CIP systems Condition: Podpfx Ajx Rcdgjfpegi Removed from active production Regularly maintained Fully functional and ready for operation Price: Alfa laval 1 €2,500; Alfa laval 2 €1,500 NN exchanger €1,000(gums need to be changed)

Year of construction: 2011, condition: used, functionality: fully functional, A complete cooling water unit used for cooling screw compressors. Pump unit with machine frame consisting of: 3 x Type: CRN32-1-1 A-F-G-V-HQQV / 30 m³/h 10.7 meters, 1.5 kW 6 x manual stainless steel shut-off valves 1 x pressure relief valve 1 x Rosemount GP6 S22 C1 pressure transmitter 6 x stainless steel pressure gauges Cl.1 2 x Gerodur plastic pipes with elbow fittings, 140 x 8.3 mm 1 x mounting frame Heat exchanger unit with frame consisting of: 2 x bolted plate heat exchangers Alfa Laval Type: M6-MFG Volume: 11.2 liters Max. operating pressure: 10 bar Max. temperature: 80°C 6 x manual intermediate flange shut-off valves, stainless steel 2 x electric valves with Auma actuators with Harting connectors 2 x electric KSB BOA valves with Auma SAR 07.1-F10 actuators and MATIC heads with Harting connectors 2 x PT 100 thermometers Pjdpfxjyrxuvo Afpegi 4 x analog thermometers stainless steel Cl.1 1 x Rosemount GP6 S22 C1 pressure transmitter 2 x PE welded pipe with bends 110x6.5 mm Gerodur 2 x PE pipe with bends 90x5.4 mm Gerodur 1 x expansion vessel 1 x mounting rack

Year of construction: 1991, condition: used, Fermentation tank with two dished bottoms. - 4 tanks with 52 hl butto content each - 2 tanks with 79 hl gross capacity each Additional title: vertical stainless steel tanks Total volume: 79 hl storage tank 2 pcs. Operating pressure: 0 bar Pgjdpsvcqzxsfx Afpji Operating temperature: 20 °C Width: approx. 1400 mm Height: approx. 4100 mm Material: Stainless steel 1.4310 Position: vertical Base construction: 4 x pipe feet, height-adjustable Features: Side manway; CIP piping; outlet valve (butterfly valve)

Condition: new, Year of construction: 2024, NEW Olive Oil Extraction Line – 5 Tons/Hour – Alfa Laval Decanter Complete Olive Oil Processing Line – Industrial Capacity We offer a complete olive oil extraction line with a processing capacity of 5 tons of olives per hour, equipped with high-quality stainless steel machinery and Alfa Laval separation technology. The line is suitable for industrial olive oil production with high efficiency and excellent product quality. Main Equipment Stainless steel conveyor belt for olives Stainless steel defoliator (leaf remover) Automatic olive washing machine Stainless steel screw conveyor Hammer crusher (30 kW / 40 HP) Paste pump 8 × Stainless steel malaxers (Green Line – 800 L each) Alfa Laval Decanter – Model X7 Alfa Laval thermal conditioning unit Stainless steel platform structure Alfa Laval vertical separator – Model UVPX 510 Stainless steel oil storage tank Electrical control panel Husk boiler – 100 kW Screw conveyors for husk removal Electrical assembly kit Technical Information Capacity: 5,000 kg olives per hour Technology: Continuous extraction system Construction: Food-grade stainless steel Separation technology: Alfa Laval Ready for loading and delivery Additional Information Psdpfjyrf Ntox Afpjgi The line can be inspected upon request. Detailed technical documentation and additional photos are available for serious buyers. We can also provide engineering services, installation, commissioning, and operator training upon request.