AMR forestry winch with grapple URFBD - 1 unit

AMR

Condition: used, - Radio system - Electric valves/cables Kedpfx Ags Aaq Exo Aodu - Small parts

Condition: used, - 3-point linkage - with convenient two-hand control - with hydraulic log lifter - with 4-way splitting wedge; hydraulically adjustable; adjustment range 31 cm - Log splitting table with support leg Kdjdpfx Ae Aaq D Ujg Aeu - with dual pump 52 cc + 7 cc

Condition: used, for the AMR log splitter "SPLITOMAT" Kodpfj Aaqxxjx Ag Aodu

Condition: used, Description The Vogesenblitz vertical log splitter HVE12 T offers a splitting force of 12 tons and is powered by a 400 V electric motor with 4.0 kW. It is suitable for the three-point linkage of categories I and II and features a two-hand safety circuit as well as a quick piston return. With a cylinder stroke of 55 cm, an ergonomically shaped splitting wedge, and a brass guide, it is user-friendly. The robust, all-steel base plate and the sturdy chassis with pneumatic tires ensure durability, while the wood-holding arms with spring provide additional comfort. - 12 tons splitting force - Drive via electric motor 400 V / 4.0 kW - Three-point linkage cat. I and II - Two-hand safety circuit - Quick piston return - 55 cm cylinder stroke - Ergonomically shaped splitting wedge - Brass guide - All-steel base plate - Incl. robust chassis with pneumatic tires - Robust and durable Kdsdpfx Ags Aaqxrs Aju - Wood-holding arms with spring

Condition: used, 700x5.0/4.0x30, Z=72, HM-WS Kdsdo Aaqxfepfx Ag Aou

Condition: used, Description The Solomat-Auto SIT700 E5A-SF is a state-of-the-art, automatic tilting saw designed in accordance with the EN1870-6 safety standard. It features a carbide-tipped saw blade with 72 teeth and is powered by a powerful 400 V/7.5 kW electric motor. The patented, angled tilting mechanism (approximately 40°) enables efficient wood processing with an automatic wood feed system and a high-quality tilting motion, controlled by a proximity switch. A safety guard provides additional safety. The saw has an adjustable length stop from 20 to 52 cm and a hydraulically pivoting 5 m conveyor belt that can be extended hydraulically by +/- 15°. Manual activation of the tilting mechanism is possible with the push of a button. - Automatic tilting saw in accordance with the EN1870-6 safety standard - Special carbide-tipped saw blade 700/30 x 5.0/4.0 mm, 72 teeth - Drive via 400 V/7.5 kW electric motor - Patented angled tilting mechanism inclined approximately 40° - Automatic wood feed system - Automatic tilting motion via high-quality proximity switch - Manual activation of the tilting mechanism possible with the push of a button - Incl. safety guard in accordance with EN 1870-6 - Adjustable length stop from 20-52 cm Kdsdpfx Ae Aaqwzeg Asu - Hydraulically pivoting 5 m conveyor belt +/- 15°, hydraulically extendable

Condition: used, Description The Solomat SIT 700 P2 is a powerful wood saw with a 2 m conveyor belt, ideal for wood with a diameter of up to 220 mm and a maximum wood length of 150 cm. It allows tool-free adjustment of cutting lengths from 20 to 52 cm with intermediate steps and features an angled lever (approx. 40°) for optimal comfort. An automatic wood feed and an emergency stop lever ensure safety with the PTO drive. The movable arm keeps the wood in position during sawing. A new feature is the special carbide saw blade, as well as a practical wood storage shelf. The machine can be easily transported with a 3-point hitch of Cat. I and II or by forklift. - For wood diameters up to 220 mm, max. wood length 150 cm Kedpo Aaqvwofx Ag Ajdu - Tool-free adjustment of cutting lengths: 20-52 cm (+intermediate steps) - Angled lever tilted approx. 40° - Automatic wood feed - Movable arm holds the wood during sawing - Emergency stop lever for PTO drive - Incl. special carbide saw blade, 700x30x5.0x4.0 mm, 72 teeth - Incl. practical wood storage shelf, 3-point hitch Cat. I and II - Attachment for forklift

Condition: used, - Complete retrofit kit for devices where a hydraulic main lift is already installed. - Pulling force of approximately 600 kg. - Cable speed up to 0.5 m/s. - 20 m cable incl. cable hook with safety latch. - Cable diameter 6 mm. - Weight 75 kg. Kedpfxo Aaqvke Ag Aodu - Transmitter: with 3 AAA batteries; 1.5 volts; 4 buttons (On / Off / Retract / Extend); 64 different frequencies; weight 120 g. - Receiver: 12 volts DC from the tractor, incl. cable and 7-pin connector. - In the event of a power failure, the valve can also be switched manually.

Condition: used, Description The AMR SAT4-700PETH "QUATROMAT" impresses with a new design and offers numerous innovative features. Equipped with a special HM saw blade (700/30 x 6.0/4.5 mm) with 72 teeth, the machine enables precise cuts. The rigid 5 m conveyor belt has a maximum discharge height of 3.0 m and is supported by a newly developed double-acting hydraulic cylinder. A drive coupling with an emergency stop for the saw blade provides additional safety. The saw head has 4 channels and can process round timber up to 160 mm in diameter and half-round timber up to 240 mm in diameter. Cutting lengths can be set in a range of 25-54 cm with freely adjustable intermediate stages, while the cutting speed is adjustable and reaches up to 60 cuts per minute. The "QUATROMAT" is powered by an electric motor (400 V, 9.2 kW) and has the following dimensions with the conveyor belt: L2680 x W1593 x H2307 mm. - New design - NEW: Special HM saw blade 700/30 x 6.0/4.5 mm, 72 teeth - 5 m conveyor belt, rigid - Max. discharge height 3.0 m - NEW: Double-acting hydraulic cylinder on the conveyor belt Kdsdpfxj Aaquyo Ag Asu - NEW: Drive coupling with emergency stop for the saw blade - 4 channels of the saw head - Up to 160 mm diameter round timber - Up to 240 mm diameter half-round timber - Cutting lengths 25-54 cm with freely adjustable intermediate stages - Adjustable cutting speed, max. 60 cuts/min - 9 cm³ pump - Dimensions with conveyor belt: L2680 x W1593 x H2307 mm

Condition: used, Description The AMR oscillating circular saw WSA-700PE is equipped with a combined drive system consisting of a power take-off (PTO) and an electric motor (400 V / 7.5 kW) and offers numerous practical features. These include a chassis with a third wheel and a transport handle, as well as a standard carbide-tipped saw blade with a diameter of 700 mm and a cutting depth of approximately 240 mm. The high-quality powder coating ensures durability, while safety features such as an oscillating arm lock, phase inverter, overload protection, and an emergency stop lever ensure safe operation. Other advantages include an adjustable length indicator, a wood clamp, and a robust, reinforced oscillating arm. The machine is EC type-approved and complies with EN standard 1870-6. - Chassis with 3rd wheel and push bar - Carbide-tipped saw blade Ø 700 mm included as standard - Cutting depth approx. 240 mm - High-quality powder coating - Oscillating arm lock - Phase inverter, overload protection and safety limit switch for electric motor - Emergency stop lever for PTO drive Ksdpfxo Aaqtce Ag Ajdu - Height of PTO connection approx. 62 cm - Protective cover according to EN standard 1870-6 - Zero-voltage release for electric motor - Adjustable length indicator included as standard - Roller handle for easier operation - Wood clamp - Stable, reinforced oscillating arm - EC type-approved - Robust and durable