270 S-250 -60

ARBURG

Condition: like new (used), Year of construction: 2022, operating hours: 12,182 h, functionality: fully functional, machine/vehicle number: 259303, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, injection weight: 184 g, fully electric injection molding machine with Multilift, conveyor belt, safety fence, from current production Manufacturer: Arburg Type: 520 E 1500-400 Control: Selogica Lhodpfozn Av Ijx Amtoi Year of manufacture: 2022 Machine No.: 259303 Operating hours: 12,182 h Injection unit Injection unit/screw 40 mm Injection volume: 201 ccm Injection weight: 184 g Heating capacity: 9.7 kW Heating zones: 5 Nozzle stroke: 300 mm, 50 kN Injection pressure: 2000 bar, increased Clamping unit Clear pillar spacing: 520 x 520 mm Platen size: 695 x 695 Clamping force: 150 tons / 1500 kN Opening stroke: 450 mm Maximum platen distance: 700-1000 mm Minimum tool installation height: 250-550 mm Ejection stroke: 175 mm / Ejection force: 40 kN Weight: 7000 kg Extras • Thermoplastic processing • Cylinder liner, highly wear-resistant • Open nozzle 400 mm incl. heating band • Nozzle tip, flat • Nozzle movement, servo-controlled • Electrical connection for needle shut-off nozzle • Tool monitoring for ejector plate securing • Safety device, open at the top • Automatic central lubrication • Volume flow for hydraulic core pulls, 60 l/min • 2 x core pull control • 2 x blowing • Electrical mold height adjustment • Cooling water with 6 free circuits • Machine-specific cooling circuits programmable • Conveyor belt, electrically programmable • Selection unit, good/bad • Pneumatic maintenance unit • Equipment packages • Extended movement sequences: • Increase in the number of movement stages and intermediate stop functions • Production control: • Production control with temperature setpoint control and programmable alarm cycles. Optimization/operator assistance: to adapt the machine to individual operational requirements • Quality assurance: • Extends the standard quality monitoring and documentation: • Options for process analysis • Documentation with actual value protocol • Boosting (starting the hot runner nozzles with temperature increase) - Free melting • Freely configurable page for start-up parameters (setting cycles with other parameters instead of production parameters) • Socket combination 1x CEE and 1 x Schuko • Socket distributor: (3x CEE and 3 x Schuko) • 12 x electrical heating control circuits at 2 kW each (230V) • Increased power for heating control circuits 1-6 to 3.5 kW each / 230V • Connected Systems (CPU Ethernet, prepared for 4th service - remote maintenance) • Robot interface euromap 67 • Coloring interface • Multilift Select / Cross arrangement, 6 kg handling weight 3 CNC axes can be moved simultaneously / incl. pneumatic valve / vacuum equipment as well as C-axis (tilting axis) pneumatically X, Y and Z-axis drives, servo-electric z-1400 mm / X-400 mm / y-800 mm / c-pneumatic tilting axis 0-90°, 13 Nm / weight 1.2 kg with special equipment X-axis extended to 600 mm / Y-axis to 1000 mm / C-axis with end position monitoring Overhead height increased by 200 mm • Conveyor belt • Safety fence • 8 freely programmable inputs • 1 interface with 4 freely programmable inputs and outputs The machine is in excellent condition and can be inspected while powered. From current production. The machine is available in our warehouse immediately. Free loading onto the buyer's truck or free delivery to the buyer's location against reimbursement of freight costs.

Year of construction: 2010, condition: ready for operation (used), Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible. Lhsdpfxjznx Hio Amtoi

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-M-500-90 Year of manufacture: 1995 Serial number: 164822 Control system: Control unit: Arburg Multronica Injection unit: Injection type: vertical injection unit Screw diameter: Ø 20 mm Lhsdpfxsx Eitbo Amtei Clamping unit: Clamping force: 500 kN Additional equipment: Pick system: part removal system Divider chute: separating chute / selective chute Enclosure: full protective enclosure

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-500-60 Year of manufacture: 1998 Serial number: 173062 Control system: Arburg Selogica Lhjdpfxox Eiq Hj Amtei Screw diameter: 18 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-500-100 Year of manufacture: 2011 Serial number: 218960 Ljdpfx Amex Eithstshi Control system: Control type: Arburg Selogica Clamping unit: Clamping force: 500 kN Injection unit: Injection type: vertical (vertical injection unit) Screw diameter: 20 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-400-70 Year of manufacture: 2010 Serial number: 214269 Control system: Control system: Arburg Selogica Direct Operator panel: operator terminal Control cabinets: complete control and power supply cabinets Clamping unit parameters: Clamping force: 400 kN Injection unit parameters: Screw diameter: 18 mm Part handling system: Manufacturer: ARBURG Lhsdpfxsx Eirwe Amtsi Type: Multilift Number of axes: 3-axis extraction robot Moulded part transport: Cycle conveyor – length/width: 2,000 × 800 mm

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Year of production: 2010 Serial number: 214430 Control system: Arburg Selogica Direct Lsdpjx Eirqjfx Amtohi Clamping force: 700 kN (70 tons) Screw diameter: 18 mm

Condition: excellent (used), Year of construction: 2009, operating hours: 78,100 h, functionality: fully functional, screw diameter: 25 mm, Arburg 520S 1600 290/70 2-Component You can find more great Arburg machines on our website: maschinen-handel.eu 78,099 hours, automatic Injection unit 1, horizontal, 290 mm diameter, 25 mm max, 71 cm³ Injection unit 2, vertical, 70 mm diameter, 18 mm max, 21 cm³ Opening stroke 925 mm Electric rotary indexing 12-zone hot runner system integrated 3 x core pull 2 x blow-out (control for needle gate) Various customer inputs and outputs Interfaces: ALS Temperature control units Dryers Multilift H 6 kg: 2 x vacuum 5 x double-acting grippers Z-axis servo 800 mm C, G, X, and B axes pneumatic Various customer inputs and outputs (gripper monitoring, etc.) We at Maschinen-Handel offer a commissioning guarantee for every machine purchased from us, as well as ensuring that the machine is commissioned by the manufacturer. Ljdjx A Dy Repfx Amtshi In this way, we offer you, as a customer, maximum security in the used machine market. Important note!!! Due to recent developments – tax information and advantages for used machines From July 1, 2025, used machines can also be taken into account for tax purposes with a special depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E)

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Lhedpsznbgfsfx Amtji Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Ledpfx Ameznbfzetohi Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz