Shredding plant pulverizer

Aufbereitungstechnologie NOLL GmbH Demino D2700

This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill.

Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material.

The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed.

The innovations of the machine are:
• the plug-in connections for the wear tools (always in the same place with minimal tolerances)
• rotation in both directions – this ensures that the tools are worn down evenly on both sides
• conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws.

Technical data:
• Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds.
Hnjdpszl Shzjfx Ahzep
• Speed up to 125 m/s
• Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible.
• Machine monitoring via bearing temperature measurement and vibration measurement included.
• Control panel is not included.

The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

The listing was translated automatically. Translation errors are possible.