Pellet machine MAGIC PELLE PTO - 1 unit

CECCATO OLINDO

The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as for animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets by using dry, ground biomass such as sawdust, hay, Miscanthus (Chinese silver grass), etc., in order to save on heating costs or to produce feed pellets. The machine is available in 3 kW, 5.5 kW, and 7.5 kW versions, and with a PTO drive. The hourly output varies depending on the model, between 30 kg and 70 kg. It is a purely Italian product that complies with EU regulations on workplace safety.

- Drive via PTO shaft, max. 540 rpm
- Suitable for tractors from approx. 18 hp
- Incl. 3-point linkage
- Pellet diameter: 6 mm
- Pellet length: approx. 25-35 mm
- Hourly output: max. approx. 70-80 kg
- Dimensions: 850 x 760 x 1260 mm (L x W x H)
- Weight: 158 kg

The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as for animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets by using dry, ground biomass such as sawdust, hay, Miscanthus (Chinese silver grass), etc., in order to save on heating costs or to produce feed pellets.
Itedpfx Aez Uzfgsg Ajn
The machine is available in 3 kW, 5.5 kW, and 7.5 kW versions, and with a PTO drive. The hourly output varies depending on the model, between 30 kg and 70 kg.
It is a purely Italian product that complies with EU regulations on workplace safety.
- Drive via PTO shaft, max. 540 rpm
- Suitable for tractors from approx. 18 hp
- Incl. 3-point linkage
- Pellet diameter: 6 mm
- Pellet length: approx. 25-35 mm
- Hourly output: max. approx. 70-80 kg
- Dimensions: 850 x 760 x 1260 mm (L x W x H)
- Weight: 158 kg

GENERAL DESCRIPTION OF THE MACHINE
The pelletizing machine, designed for non-professional use, has been developed and built to produce pellets from sawdust and wood waste from wood processing (the following describes the main characteristics and morphological properties of the materials to be used). The process automatically performed by the machine consists of compressing and extruding the material introduced into the upper feed hopper. Through heating, which occurs automatically and is maintained by the dissipation of heat due to compression, the pellet is compacted as it passes through the die. For the operation of the machine, the continuous presence of an operator is required, who feeds the raw product, either manually or using an automatic feeding system. The following lists the limit properties of the supply product: MORPHOLOGY: chips or material with a particle size of no less than 0.5 mm and no more than 12 mm. MOISTURE CONTENT: between 10% and 14% (a factor that strongly depends on the type of product used; in any case, these are indicative values). PROPERTIES: pure material (free from impurities, especially metallic or of any kind that could damage the machine). The buyer is responsible for verifying the pelletizability of the materials.

The listing was translated automatically. Translation errors are possible.