Bio-shredder TRITONE ONE ELECTRIC - 1 unit

CECCATO OLINDO

Condition: new, The Tritone SPRINT ELECTRIC by Ceccato Olindo is a bio-shredder for home use. It is a product that is entirely manufactured in Italy and is equipped with a feed hopper for branched plant waste with a maximum diameter of 4 cm. It features a cutting mechanism with 2 main blades, 2 counter-blades, and 6 shredding blades inside. It is fitted with 2 high-quality pneumatic tires. It is available in a single-phase version (3 HP, 2.2 kW, 230 V) and a three-phase version (3 HP, 2.2 kW, 400 V). Great attention has been paid to details in this model, as well as in the other models from Ceccato Olindo. The electric motors are seven-layer coated and individually adapted to many of their technical characteristics for Ceccato Olindo. Motor: 400 V / 2.2 kW Feed opening: 305 x 305 mm Maximum diameter of shredded material: 40 mm Main blades: 2 Shredding blades: 6 Bdodpfx Aio Adkn Ij Tsi Dimensions: 1300 x 580 x 1150 mm (L x W x H) Weight: 61 kg

Condition: new, The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as for animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets by using dry, ground biomass such as sawdust, hay, Miscanthus (Chinese silver grass), etc., in order to save on heating costs or to produce feed pellets. The machine is available in 3 kW, 5.5 kW, and 7.5 kW versions, and with a PTO drive. The hourly output varies depending on the model, between 30 kg and 70 kg. It is a purely Italian product that complies with EU regulations on workplace safety. - Drive via PTO shaft, max. 540 rpm - Suitable for tractors from approx. 18 hp Bdodpfx Aj Adh U Eoi Tei - Incl. 3-point linkage - Pellet diameter: 6 mm - Pellet length: approx. 25-35 mm - Hourly output: max. approx. 70-80 kg - Dimensions: 850 x 760 x 1260 mm (L x W x H) - Weight: 158 kg The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as for animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets by using dry, ground biomass such as sawdust, hay, Miscanthus (Chinese silver grass), etc., in order to save on heating costs or to produce feed pellets. The machine is available in 3 kW, 5.5 kW, and 7.5 kW versions, and with a PTO drive. The hourly output varies depending on the model, between 30 kg and 70 kg. It is a purely Italian product that complies with EU regulations on workplace safety. - Drive via PTO shaft, max. 540 rpm - Suitable for tractors from approx. 18 hp - Incl. 3-point linkage - Pellet diameter: 6 mm - Pellet length: approx. 25-35 mm - Hourly output: max. approx. 70-80 kg - Dimensions: 850 x 760 x 1260 mm (L x W x H) - Weight: 158 kg GENERAL DESCRIPTION OF THE MACHINE The pelletizing machine, designed for non-professional use, has been developed and built to produce pellets from sawdust and wood waste from wood processing (the following describes the main characteristics and morphological properties of the materials to be used). The process automatically performed by the machine consists of compressing and extruding the material introduced into the upper feed hopper. Through heating, which occurs automatically and is maintained by the dissipation of heat due to compression, the pellet is compacted as it passes through the die. For the operation of the machine, the continuous presence of an operator is required, who feeds the raw product, either manually or using an automatic feeding system. The following lists the limit properties of the supply product: MORPHOLOGY: chips or material with a particle size of no less than 0.5 mm and no more than 12 mm. MOISTURE CONTENT: between 10% and 14% (a factor that strongly depends on the type of product used; in any case, these are indicative values). PROPERTIES: pure material (free from impurities, especially metallic or of any kind that could damage the machine). The buyer is responsible for verifying the pelletizability of the materials.

Condition: new, The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets by using dry, ground biomass such as sawdust, hay, Miscanthus (Chinese silver grass), or similar, to save on heating costs or to produce feed pellets. The machine is available in 3 HP, 5.5 HP, 7.5 HP versions and with a PTO drive. The hourly output varies depending on the model, between 30 kg and 70 kg. It is a purely Italian product that complies with EC regulations for workplace safety. - Drive via electric motor 400V/7.5 HP (~5.52 kW) - Pellet diameter: 6 mm - Pellet length: approx. 25-35 mm - Hourly output: approx. 70-80 kg - Dimensions: 850 x 680 x 1110 mm (L x W x H) - Weight: 150 kg Bdjdpfo Adh Uxex Ai Tei GENERAL DESCRIPTION OF THE MACHINE The pelletizing machine, designed for non-professional use, is designed and built to produce pellets from sawdust and wood waste from wood processing (the main characteristics and morphological properties of the materials to be used are described below). The process, which is automatically carried out by the machine, consists of the compression and extrusion of the material introduced into the upper feed hopper. Through heating, which is generated automatically and maintained by the heat dissipation due to the compression, the pellet is compacted as it passes through the die. For the operation of the machine, the permanent presence of an operator is required, who feeds the raw product, either manually or using an automatic feeding system. The limit properties of the feed product are listed below: MORPHOLOGY: chips or material with a particle size not less than 0.5 mm and not more than 12 mm. MOISTURE CONTENT: between 10% and 14% (a factor that depends strongly on the type of product used; in any case, these are guideline values). PROPERTIES: pure material (free of impurities, especially metallic or of any kind that could damage the machine). The verification of the pelletizability of the materials is the responsibility of the buyer. Any verbal instructions, multimedia or written documentation provided regarding pelletizable products are to be understood as purely informal and indicative. KONRAD HOG WERKSVERTRETUNGEN GMBH ACCEPTS NO LIABILITY REGARDING THE PELLETIZEABILITY OF THE MATERIALS. NO COMPLAINTS REGARDING LOW OR LACKING PELLET PRODUCTION WILL BE ACCEPTED UNLESS THEY CAN BE CLEARLY TRACED BACK TO A FAULT IN THE MACHINE ITSELF. THEREFORE, IT IS RECOMMENDED TO ENSURE BEFORE ANY COMPLAINT THAT THE COMPLAINED FAULT IS NOT DEPENDENT ON THE MATERIAL USED OR THE INABILITY TO USE THE MACHINE. THE FAULT CHECK WILL IN ANY CASE BE AT THE EXPENSE OF THE BUYER. SHOULD THE MACHINE NOT SHOW ANY FAULTS DURING A POSSIBLE CHECK, WE RESERVE THE RIGHT TO DEMAND REIMBURSEMENT OF THE COSTS FOR THIS CHECK. IF

Condition: new, The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as for animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets using dry, ground biomass, such as sawdust, hay, Miscanthus (Chinese silver grass), or similar, to save on heating costs or to produce feed pellets. The machine is available in 3 HP, 5.5 HP, and 7.5 HP versions, as well as with a PTO drive. The hourly output varies depending on the model, ranging from 30 kg to 70 kg. It is a purely Italian product that complies with EC regulations for workplace safety. - Drive via electric motor 400V/5.5 HP (~4.05 kW) - Pellet diameter: 6 mm - Pellet length: approx. 25-35 mm - Hourly output: max. approx. 30-40 kg - Dimensions: 850 x 680 x 1110 mm (L x W x H) - Weight: 135 kg Bdsdpfx Ao Adh Ursi Tei GENERAL DESCRIPTION OF THE MACHINE This pelletizing machine, intended for non-professional use, has been designed and built to produce pellets from sawdust and wood waste from wood processing (the main features and morphological properties of the materials to be used are described below). The process automatically performed by the machine consists of compressing and extruding the material introduced into the upper feed hopper. Through heating, which occurs automatically and is maintained by the heat dissipation due to the compression, the pellet is compacted as it passes through the die. For the operation of the machine, the continuous presence of an operator is required, who feeds the raw material, either manually or using an automatic loading system. The limit properties of the feed material are listed below: MORPHOLOGY: chips or material with a particle size not less than 0.5 mm and not more than 12 mm. MOISTURE CONTENT: between 10% and 14% (a factor that depends heavily on the type of product used; in any case, these are indicative values). PROPERTIES: pure material (free from contaminants, especially metallic or of any kind that could damage the machine). The verification of the pelletizability of the materials is the responsibility of the buyer. Any verbal instructions, multimedia or written documentation provided regarding pelletizable products should be understood as purely informal and indicative. KONRAD HOG WERKSVERTRETUNGEN GMBH ACCEPTS NO RESPONSIBILITY FOR THE PELLETIZABILITY OF THE MATERIALS. NO COMPLAINTS WILL BE ACCEPTED REGARDING LOW OR LACK OF PELLET PRODUCTION, UNLESS THIS CAN BE CLEARLY TRACED BACK TO A FAULT IN THE MACHINE ITSELF. THEREFORE, IT IS RECOMMENDED THAT BEFORE MAKING ANY COMPLAINT, IT IS ENSURED THAT THE COMPLAINT IS NOT RELATED TO THE MATERIAL USED OR THE INABILITY TO USE THE MACHINE. THE FAULT DIAGNOSIS WILL IN ANY CASE BE THE RESPONSIBILITY OF THE BUYER. IF THE MACHINE DOES NOT SHOW ANY FAULTS DURING A POSSIBLE INSPECTION, WE RESERVE THE RIGHT TO CHARGE FOR THE COSTS OF THIS INSPECTION. IF THE BUYER REQUESTS THE INTERVENTION OF PERSONNEL FROM SMARTEC SRL (OR ITS REPRESENTATIVE)

Condition: new, The electric pellet press MAGIC from Ceccato Olindo is a state-of-the-art machine for producing pellets for stoves and boilers, as well as for animal feed. This machine is easy to operate and is suitable for families or small businesses that want to produce their own pellets by using dry, ground biomass such as sawdust, hay, Miscanthus (Chinese silver grass), etc., to save on heating costs or to produce feed pellets. The machine is available in 3 HP, 5.5 HP, 7.5 HP versions and with a PTO drive. The hourly output varies depending on the model, from 30 kg to 70 kg. This is a purely Italian product that complies with EC regulations for workplace safety. - Drive via electric motor 230V/3.0 HP (~2.21 kW) - Pellet Ø: 6 mm - Pellet length: approx. 25-35 mm - Hourly output: max. approx. 30-40 kg - Dimensions: 850 x 680 x 1110 mm (L x W x H) - Weight: 135 kg Bdedpj Adh Ulsfx Ai Toi GENERAL DESCRIPTION OF THE MACHINE The pelletizing machine, designed for non-professional use, was developed and built to produce pellets from sawdust and wood waste from wood processing (the main features and morphological properties of the materials to be used are described below). The process, which is carried out automatically by the machine, consists of the compression and extrusion of the material fed into the upper feed hopper. By heating, which is generated automatically and maintained by the heat dissipation due to the compression, the pellet is compacted as it passes through the die. For the operation of the machine, the permanent presence of an operator is required, who feeds the starting product, either manually or using an automatic loading system. The following lists the limit properties of the feed product: MORPHOLOGY: chips or material with a particle size between 0.5 mm and 12 mm. MOISTURE CONTENT: between 10% and 14% (a factor that strongly depends on the type of product used; in any case, these are only indicative values). PROPERTIES: pure material (free from impurities, especially metallic or any kind that could damage the machine). Checking the pelletizability of the materials is the responsibility of the buyer. Any verbal instructions, multimedia or written documentation provided regarding pelletizable products should be understood as purely informal and indicative. KONRAD HOG WERKSVERTRETUNGEN GMBH ASSUMES NO RESPONSIBILITY FOR THE PELLETIZEABILITY OF THE MATERIALS. NO COMPLAINTS WILL BE ACCEPTED REGARDING LOW OR LACK OF PELLET PRODUCTION UNLESS THIS CAN BE CLEARLY ATTRIBUTED TO A FAULT IN THE MACHINE ITSELF. THEREFORE, IT IS RECOMMENDED TO ENSURE BEFORE ANY COMPLAINT THAT THE ALLEGED DEFECT IS NOT DUE TO THE MATERIAL USED OR THE INABILITY TO USE THE MACHINE. THE FAULT DIAGNOSIS WILL IN ANY CASE BE THE RESPONSIBILITY OF THE BUYER. SHOULD THE MACHINE NOT SHOW ANY DEFECTS DURING A POSSIBLE INSPECTION, WE RESERVE THE RIGHT TO CHARGE FOR THE COSTS OF THIS INSPECTION. IF THE BUYER ENGAGES THE SERVICES OF PERSONNEL FROM SMARTEC SRL (OR