Automatic painting system for chairs or similar products

CM

Condition: new, functionality: fully functional, machine/vehicle number: 12412802, empty load weight: 540 kg, maximum load weight: 760 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 3,150 mm, loading space width: 1,640 mm, loading space height: 2,370 mm, Year of construction: 2026, Loading dimensions approx. 1640 mm x 3150 mm x 2000 mm External dimensions approx. 2150 mm x 4450 mm x 2370 mm Gross vehicle weight: 1300 kg Payload: approx. 760 kg (payload varies depending on additional equipment) Manufacturer: Debon Features - Aluminium box body - Polyester roof and front (aerodynamic) - Pullman V2 low-floor chassis - Floor plate: aluminium floor (anti-slip) - Door/ramp combination (aluminium) - Shock absorbers installed including 100 km/h certification - Lockable side door - Interior lighting with switch - 6 lashing rings on loading floor - Vehicle documents included Additional equipment - Rear supports - Wheel chocks and holders Chassis - Pullman V2 | coil spring suspension and shock absorber | V-drawbar with ball coupling | automatic heavy-duty jockey wheel Electrics - 12 volt | 13-pin connector | marker lights | fog light If you wish to purchase this trailer or have further questions about trailers, please refer to our internal flatbed trailer number "12412802". Bedpfx Ahjq T R R Ts Ield

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Blodsyn D Nqjpfx Ah Ied Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. Bjdpfeyn D Ndox Ah Ield You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Blsdeyn A Ifopfx Ah Isd Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm Bjdpfoyn A Huex Ah Ield - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 350 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 350 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load - Galvanized uprights - Crossbars 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR35 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Bjdpoyn A Hnsfx Ah Isld Shelf consists of : - 06 x upright approx. 350 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1460,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, functionality: fully functional, The used Stow pallet racking system is a high-quality heavy-duty rack designed for industrial storage – approximately 18.5 m long and 7 m high. It is ideal for logistics operations, warehouses, and trade businesses needing maximum storage capacity in a minimal footprint. Manufactured in Europe, this racking system offers stability, quality, and durability. Now available directly from stock – perfect for companies with high turnover volumes. Customizable to your requirements: The rack uprights can be adapted to your desired height, precisely and professionally rebuilt in our workshop. Contact us – we offer tailored solutions for your storage needs. PRODUCT DETAILS: - Height: approx. 700 cm - Depth: approx. 110 cm - Length: approx. 1850 cm - Shelf load: 3200 kg - Beams: 360 x 14.5 x 5 cm - Beam color: RAL 2004 (orange lacquered) - Uprights: 700 x 110 cm, RAL 5015 (blue lacquered), pre-assembled - Levels: Floor + 3 - Pallet spaces: 80 incl. floor loading positions - Condition: Used Stow system SCOPE OF DELIVERY: - 06 x Uprights (approx. 700 x 110 cm), pre-assembled - 30 x Beams (approx. 360 x 14.5 x 5 cm) - 60 x Safety pins Price: 1,980.00 € net 2,356.20 € gross An invoice with VAT will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery across Germany by our partner freight forwarder – shipping costs depending on postcode Bjdpfx Aeyn A Dteh Ield - Professional assembly and disassembly by trained teams optionally available - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether for new construction, modification, or extension, we will support you professionally in configuring your racking system. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, storage racks, and further solutions. Many systems are assembled and ready for demonstration. Our expert advisors are available for all your questions and offer individual consultation – we look forward to welcoming you! Didn't find the right solution yet? Visit our website for a quick overview of many offers and product variants! INTERESTED OR HAVE QUESTIONS? Contact us by message or phone. Our phone number is available on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: new, Year of construction: 2022, approx. 14 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 250 cm - Depth : approx. 110 cm - Length : approx. 14 running meters - Load: 3000 kg shelf load Bljdpjyn Ay Ijfx Ah Ied - Stand in galvanized - Crossbars 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 06 x upright approx. 250 cm x 110 cm, disassembled. - 20 x crossbar approx. 270 x 14 x 5 cm, T30. - 40 x safety pins. - Levels: Floor + 2 - 45 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1280,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : Delivery can be carried out by our partner forwarding agency on request, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, functionality: fully functional, The used Stow pallet racking system is a high-quality heavy-duty rack designed for industrial storage – approximately 18.5 m long and 7 m high. It is ideal for logistics operations, warehouses, and trade businesses needing maximum storage capacity in a minimal footprint. Manufactured in Europe, this racking system offers stability, quality, and durability. Now available directly from stock – perfect for companies with high turnover volumes. Customizable to your requirements: The rack uprights can be adapted to your desired height, precisely and professionally rebuilt in our workshop. Contact us – we offer tailored solutions for your storage needs. PRODUCT DETAILS: - Height: approx. 700 cm - Depth: approx. 110 cm - Length: approx. 1850 cm - Shelf load: 3200 kg - Beams: 360 x 14.5 x 5 cm - Beam color: RAL 2004 (orange lacquered) Blsdpfxjyn Axwj Ah Ied - Uprights: 700 x 110 cm, RAL 5015 (blue lacquered), pre-assembled - Levels: Floor + 3 - Pallet spaces: 80 incl. floor loading positions - Condition: Used Stow system SCOPE OF DELIVERY: - 06 x Uprights (approx. 700 x 110 cm), pre-assembled - 30 x Beams (approx. 360 x 14.5 x 5 cm) - 60 x Safety pins Price: 1,980.00 € net 2,356.20 € gross An invoice with VAT will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery across Germany by our partner freight forwarder – shipping costs depending on postcode - Professional assembly and disassembly by trained teams optionally available - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether for new construction, modification, or extension, we will support you professionally in configuring your racking system. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, storage racks, and further solutions. Many systems are assembled and ready for demonstration. Our expert advisors are available for all your questions and offer individual consultation – we look forward to welcoming you! Didn't find the right solution yet? Visit our website for a quick overview of many offers and product variants! INTERESTED OR HAVE QUESTIONS? Contact us by message or phone. Our phone number is available on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), functionality: fully functional, total length: 2,700 mm, total height: 120 mm, total width: 50 mm, load capacity: 3,000 kg, Meta Multipal Beams – approx. 270 cm | Inspected & Used The Meta Multipal beams with an approximate length of 270 cm are from inspected used stocks and are available for immediate delivery from our warehouse. They are ideal for expanding existing Meta pallet racking and heavy-duty shelves. Additionally, they are compatible with the Jungheinrich system Type S – making them flexible for various warehousing requirements. Thanks to their robust construction and original design, they are reliable for daily warehouse operations. Specifications: - Length: 270 cm - Height: 12 cm - Width: 5 cm - Racking system: Meta - Type: Multipal - Load capacity: up to 3000 kg Bedpjyn Aw Hjfx Ah Ijld - Includes safety pins - Original part no.: 402 6212 441291 - Used items, available from stock, immediate delivery possible. -- MULTIPLE UNITS IMMEDIATELY AVAILABLE -- Price: €25.00 net €29.75 gross You will receive an invoice with VAT shown separately. HAVEN’T FOUND THE RIGHT SOLUTION YET? Visit our website for a quick overview of many offers and product variations! Transport: Delivery is available upon request by our partner freight forwarder, with costs depending on your postal code. Assembly: Our trained personnel are available to assist you professionally with the assembly and disassembly of your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly. INTERESTED OR HAVE QUESTIONS? Feel free to contact us by message or phone call. You can find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.