Vertical machining center

Deckel Maho DMC 60 T

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, number of axes: 5, This DMG DECKEL MAHO DMC 60T was manufactured in 2005. A Universal machining centre, it offers robust construction and reliable performance for precision machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60T Universal machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Machine with nc rotary table and tool magazine for 60 tools: approximately 9610 kg • Belt filter system 900 l: approximately 850 kg • Installation weight of machine with max weight for workpiece, tools, and operating materials, belt filter system: maximum 11500 kg Gujdpox Hbmfsfx Ad Hja • B-axis complelty overhauled Extra Information Machine still under power // Contril unit: Heidenhain: MILL PLUS 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery. 900 liter cooling water tank with belt filter

Condition: good (used), Year of construction: 2005, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, total height: 2,450 mm, total length: 5,200 mm, total width: 4,500 mm, table width: 500 mm, table length: 630 mm, table load: 300 kg, overall weight: 12,000 kg, 5-axis CNC machine (VMC) DECKEL MAHO - DMC 60T MACH-ID 9443 Make: DECKEL MAHO Type: DMC 60T Control: HeidenHain iTNC530 Year: 2005 € 12.500,00 X - Travel: 760mm Y - Travel: 560mm Z - Travel: 560mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 630mm Table Width: 500mm Table load: 300 Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Gsdpjym R Tgsfx Ad Hsua Coolantsystem: Yes Length: 5200mm Width: 4500mm Height: 2450mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Gedpfxswtft No Ad Hjua Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Gujdpjwm Rrwjfx Ad Hsa Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: used, Year of construction: 2004, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC-530, number of slots in tool magazine: 60, tool length: 315 mm, tool diameter: 160 mm, Equipment: chip conveyor, Deckel Maho DMC-60T – 5-Axis Vertical Machining Center The Deckel Maho DMC-60T is a high-precision 5-axis vertical machining center, year of manufacture 2004, equipped with Heidenhain iTNC-530 CNC control. The machine is ideal for complex and high-speed machining thanks to its ISO 40 taper spindle, maximum speed of 18,000 rpm, and motor power of 19/28 kW (continuous/30 min). Main features: Guedjwt N Tyopfx Ad Hsa Axis travels: X = 780 mm, Y = 560 mm, Z = 560 mm Rotary axes: A = ±150° (head), B = 360° (table), continuous rotation with minimum resolution of 0.001° Table: 630 x 500 mm, maximum load 500 kg Rapid traverse: up to 50,000 mm/min Tool magazine: 60 stations, SK40 DIN-69871 tools, max Ø 80/160 mm, max length 315 mm, max weight 8 kg Additional equipment: Workpiece probing system, chip conveyor, coolant tank with pumps, high-pressure pump through spindle, spindle chiller, transformer, manuals, and CE documentation. Machine dimensions and weight: L 5,100 mm × W 5,000 mm × H 2,500 mm – Weight: 11,000 kg

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1143 000084 3, TECHNICAL DETAILS X-axis movement: 780 mm Y-axis movement: 560 mm Z axis movement: 560 mm B-axis movement: +30° to -120° C-axis movement: 360° stepless Gedpfxjmiilbe Ad Hsua Control: Heidenhain iTNC 530 spindle speed range: 0 - 12 000 rpm tool holder: ISO SK 40

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, 5-axis machining center with rotary table (C) and tilting head (B) The machine comes from a large operation and was maintained preventively. TECHNICAL DETAILS Travel X: 760 mm Travel Y: 560 mm Travel Z: 560 mm Control: 840 D Powerline Siemens Tool holder: SK 40 Number of tool magazine positions: 60 Spindle speed: 0–12,000 rpm Pallet size: 630 x 500 mm Feed rate: 20–15,000 mm/min Rapid traverse: 50 m/min MACHINE DETAILS Total connected load: 64.2 kVA Total power requirement: 26 kW Machine weight: 12 t Space requirements: 5.2 x 4.5 x 2.45 m Spindle hours: 20,844 h Operating hours: 58,437 h Dimensions and Weight Machine body length: 3,450 x 2,400 x 2,650 mm Machine body weight: approx. 6.50 t Guedpfswvitxox Ad Hja Tool magazine length: 2,600 x 1,000 x 2,000 mm Tool magazine weight: approx. 0.50 t Cooling unit length: 1,850 x 1,750 x 1,500 mm Cooling unit weight: approx. 0.50 t Chip conveyor length: 3,200 x 1,000 x 1,700 mm Chip conveyor weight: approx. 0.50 t EQUIPMENT - Pallet changer with 2 pallets - Tool changer with 60 positions