Universal machining center

DECKEL MAHO DMU 50 eVo linear

Condition: like new (used), Year of construction: 2006, functionality: fully functional, Deckel Maho DMU 50 evo Linear with TNC 530 control from Heidenhain, in TOP condition Technical data: >> Year of manufacture 2006 >> Manufacturer: Heidenhain, type iTNC 530 >> Travels X500/Y450/Z400 >> C-axis 360 degrees >> B-axis 0 degrees to 161.955 degrees >> Tool holder HSK A63 >> Max. spindle speed up to 18000 rpm >> Feed rate continuously programmable up to X, Y, Z 20000 mm/min >> C-B axis continuously programmable up to rapid traverse speed >> Rapid traverse Y- and Z-axis 50 m/min >> X-axis 80 m/min (linear drive) >> B-axis 40 rpm >> C-axis 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping surface Ø 500 x 380 mm >> T-slot spacing 63/14H7 >> Table load 200 kg >> Dimensions and weight: approx. >> Machine without control and attachments >> Depth 3.0 meters, width 2.4 meters, height 2.6 meters >> Weight approx. 7000 kg >> Operating voltage 400 V >> Electric handwheel Heidenhain HR 410 >> Power connection 17 kVA >> Chip conveyor Godpfxjzg Dnvo Ahzeiw >> Active spindle cooling >> Mist extractor >> IKZ 40 Bar >> Coolant cleaning system (fleece filter system) >> Spray gun >> Visiport >> Compressed air supply to the measuring system >> Preparation for robot loading >> 3D probe Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage detection >> Complete documentation The following work has been carried out: >> Main spindle overhauled >> Complete maintenance: All coolant hoses and pneumatic hoses renewed, filters new, fluids and belts renewed. Scrapers, etc. Complete cleaning. >> Geometrically measured (acceptance report) About the machine: Offered is a Deckel Maho DMU 50 evo Linear machining center with a TNC 530 3D path control from Heidenhain. The machine is in very good condition. The main spindle has been overhauled (replacement spindle) on the DMU, completely serviced, and an acceptance report has been created. Invoices for the overhaul of 42,000 Euros (net) are available. Take the opportunity to inspect and test the machine on site while it is powered up.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection • Extraction system excluded Technical Specification Taper Size SK 40 Giodpfsx Rd Hpsx Ahzjw

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN control MillPlus iT table surface area ø 500 x 380 mm B-axis 0 - 161,955 ° C-axis 360 ° spindle taper SK 40 spindle turning speed range 20 - 18.000 U/min spindle power max. 35 kW max. torque on the spindle max. 130 Nm feeds -stepless- bis 20.000 mm/min rapid traverse X/Y/Z axis 80 / 50 / 50 m/min Godpewlvi Ejfx Ahzeiw rapid traverse B-axis 40 U/min C-axis rapid feed 50 U/min no. of tools in magazin 30 tool diameter if 2 vacant positions 130 mm tool diametre at full load 80 mm tool length - max. 300 mm weight of tools max. 6 kg internal coolant system feed 40 bar total power requirement 52 kVA weight of the machine ca. 6 t = 5-axis machining center with 2-axis NC swivelling rotary table Accessories: electron. handwheel, chip conveyor, coolant, band filter device

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Gsdpsu Hkb Refx Ahzjiw Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 2006, operating hours: 37,654 h, functionality: fully functional, machine/vehicle number: 10915548924, spindle speed (max.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this used Deckel Maho DMU 50 eVo linear universal machining centre, year of manufacture 2006. The guides of the X, Y, and Z axes, as well as the ball screws, were completely replaced at the end of 2023. Geometrically, the machine is currently as good as new. If you have any questions or need further information, please feel free to send us a message or give us a call. Gijdpfx Aex Srp Ujhzjw