CNC milling machine with tool changer

DECKEL FP 3 ATC

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Gedpfx Aoghtvajh Ijuk Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Year of construction: 2007, condition: good (used), Technical data shown i pdf file in attachment. Guedpfxsmnp D Ij Ah Ijk Parts shown by hand not come. Chucks on the table are not included. Machine vices not come.

Condition: used, Year of construction: 1980, x-travel 300 mm Gujdpsw A Ap Hofx Ah Ijk y-travel 160 mm z-travel 340 mm tool taper SK40 Speed 40-2000 U/min. control Aktiv HEIDENHAIN table-size 600 x 210 mm total power requirement 2 kW weight of the machine ca. 0,73 t dimensions of the machine ca. TBH 1200x1100x1600 m - Active feed in the X and Z axes - Additional swiveling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Several fixtures and clamping devices/milling cutters - Operating instructions

Condition: good (used), Year of construction: 1980, Table size 1300 x 355 mm Tool holder, vertical + horizontal ISO 50 Travel X-axis 1000 mm Y-axis 350 mm Z-axis 450 mm Vertical milling head, swiveling R + L Quill stroke 100 mm Speed range 22.4 – 1400 rpm Feed range 6.3 – 630 mm/min Rapid traverse 2.5 m/min Drive power approx. 5 kW Space requirement L x W x H 1900 x 1800 x 2100 mm Weight 3200 kg Accessories / Special features: • 3-axis digital display, make FAGOR • Swiveling vertical milling head (R-L) with quill adjustment 100 mm • Vertical and horizontal milling spindle ISO 50 • Milling spindle vertical + horizontal • Large Clamping table 1350 x 350 mm • Feed and rapid traverse in all axes • Wide, stable guideways Godpfxovu Dv Te Ah Iouk • Central lubrication • Swiveling control panel • Coolant system • EMERGENCY STOP switch Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,000 mm, total height: 2,200 mm, total length: 3,550 mm, height adjustment type: electric, table height adjustment: 500 mm, workpiece weight (max.): 80 kg, grinding belt length: 7,000 mm, grinding length: 1,500 mm, grinding belt width: 150 mm, overall weight: 870 kg, extraction connection diameter: 180 mm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, type of input current: three-phase, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), input voltage: 400 V, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version Guodpfotwb U Asx Ah Iok The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: ready for operation (used), travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, position of the milling head: SK40, input voltage: 400 V, Deckel FP1 2 axis Active Displacements: X = 300 mm Y = 160 mm Z = 340 mm Speed 40-2000 Rpm Automatic feed and rapid traverse on the X, Y and Z axes. Continuously adjustable. Table dimensions 600 x 260 mm 2 axes Active control, point-to-point control. 3 axis digital readout from Heidehain. Spindle mounting SK40 Deckel mounting (outside thread) Guedpfx Ahevuzg Aj Isk

Year of construction: 1994, condition: ready for operation (used), Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation. Gujdpfx Ajix Ahboh Iek

Condition: used, Year of construction: 1991, pressure 60 t throat 280 mm stroke 10 - 90 mm ram adjustment 60 mm no. of strokes 110 Hub/min table surface area 740 x 550 mm clamping plate 740 x 555 mm ram surface 380 x 200 mm Gusdpfx Aev Az T Sjh Ijk daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,850 t dimensions of the machine ca. B 1,1 x T 1,6 x H 2,3 m - fixed table - clamping plate - hydraulic clutch Ortlinghaus with additional brake - manual central lubrication Machine is partially overhauled in our company as follows: - disassembled, cleaned and completely technically inspected - new colour - shaft pulling, crack inspection, new seals - new control cabinet with touchscreen - current press inspection

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,650 mm, total length: 4,640 mm, total height: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, overall weight: 1,200 kg, input voltage: 400 V, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, grinding width: 950 mm, grinding belt speed: 25 mm/s, rotational speed (max.): 1,435 rpm, grinding belt length: 9,000 mm, extraction connection diameter: 180 mm, power: 5.5 kW (7.48 HP), grinding belt width: 150 mm, height adjustment type: electric, grinding length: 2,500 mm, input frequency: 50 Hz, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide Gjdpfov S Sr Rox Ah Ijuk - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Description Trumpf TRUBEND 5085 - WORKING INSIDE PRODUCTION DAILY ORDERS WORKING HORS: PRESENT ON PHOTO OF SCREEN Year 2011 Compression force: 85 tonnes Table length: 2,200 mm Free travel speed: 220 mm/s Accessories: Increased lift height from 230 mm to 615 mm. 5-axis bending. Hydraulic tool clamping at the bottom. Hydraulic tool clamping at top. Automatic bombing. Bendguard guard ACB angle measurement FOR CLIENT WE ORGANIZE AS WELL DISMANTLING AND TRANSPORT Gjdsvlayvepfx Ah Isuk Specifications Manufacturer TRUMPF Model TRUBEND 5085 Year 2011 Condition Used (EXCELLENT)