Sick cat

DEMAG

Condition: used, Year of construction: 1988, CRANE HALL with ADDITION 492 m² + 288 m² with 2 x 10-ton crane runways *for DIY enthusiasts* DEMAG, year of construction 1988 Crane hall (all dimensions are approximate) Width: 13.50 m Length: 36.50 m Eaves height: 8.89 m Ridge height: 9.25 m Roof slope: 3.05° Snow load at previous location: approx. 85 kg/m² Crane runways: 2 pieces Crane runway 1: 10 tons Cantilever at a height of: 8.85 m, the same for both cranes Hook height at 7.00 m, the same for both cranes Serial No. 1: Serial No. 88205500 Type FKKF, year of construction 1988 Drive motor 1 Pjdpoz Hlx Hsfx Anyorb Crane runway 2: 10 tons Serial No. 2: Serial No. 88205510 Type FKKF, year of construction 1988 Drive motor 2 Addition Width: approx. 12.00 m Length: approx. 24.00 m Height: approx. 5.60 - 6.00 m Crane runway support provided for approx. 2.5 - 4 tons Equipment Supports: HEA 400, 14 pieces, 9.80 m, 17,150 kg incl. struts to truss, approx. 1.40 m Truss: IPE 400, 7 pieces, 10.70 m, 4,966 kg Gable wall supports Wall posts: IPE 140, 32 pieces, 6.00 m, 2,478 kg Pressure tubes roof: DN 80, 14 pieces, 6.00 m, 528 kg Gable wall supports Wind bracing in 3rd bay, 10 mm, 10 pieces, 6.23 m, approx. 23 kg Crane runway rails: 2 x 36 m 1 gable frame Supports: IPE 360, 3-4 pieces Pressure tubes: 90 mm, 11 pieces Corner supports: HEA 300, 3 pieces, 5.60 m The supports were cut off, 1 support was tapered, approx. 60 were embedded in concrete. Roofing: none Wall panels: none Windows: none Doors: none Gates: none Power cable crane runway: none Structural calculations / plans: none Lighting: none Crane runway drive, addition: none

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for sale.Contact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc • Cycles: 12875090 • Tiebar Spacing: 820 mm Prjdpfx Ansx D Nxzsyjb • Clamping Force: 3500 kN

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 80 mm, clearance between the columns: 1,000 mm, displacement volume: 1,779 cm³, injection pressure: 1,855 bar, injection weight: 1,600 g, mold height (min.): 450 mm, ejector force: 96,000 N, ejector stroke: 300 mm, plate length: 1,450 mm, plate width: 1,350 mm, Clamping force: 650t Year of manufacture: 2005 Prjdpfx Ajz E Iq Asnyob Injection weight: 1600g Injection unit 3300 Screw diameter: 80 mm Screw L/D ratio: 20 Specific injection pressure: 1855 bar Injection volume: 1779 ccm Injection weight: 1600 g Mold closing system Clamping force: 650 t Mold plate dimensions: 1450 x 1350 mm Distance between columns: 1000 x 900 mm Mold height: 450 - 950 mm Opening stroke: 930 mm Maximum plate distance: 1880 mm Ejector force: 96 kN Ejector stroke: 300 mm Control system: NC4 Equipment: - Hydraulic core pulls: 4 - Hydraulic cascades: 8 - Hot runner adjustment points (zones): 16 - Wittmann W 843 Pro robot, year 2021 (Z 3000 / Y 2000 / X 1200 mm, C-axis servo 180°, B-axis servo 270°) included

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, displacement volume: 1,212 cm³, injection pressure: 1,877 bar, injection weight: 1,100 g, mold height (min.): 380 mm, ejector force: 96,000 N, ejector stroke: 230 mm, plate length: 1,200 mm, plate width: 1,200 mm, total length: 8,020 mm, total width: 2,210 mm, total height: 2,570 mm, overall weight: 21,000 kg, Closing force: 420 t Year of manufacture: 2015 Injection weight: 1,100 g Injection unit 2300 Screw diameter: 70 mm Screw L/D ratio: 20 Specific injection pressure: 1877 bar Injection volume: 1212 ccm Injection weight: 1,100 g Pump motor power: 51 kW Cylinder heater band power: 27 kW Closing unit Closing force: 420 t Tool plate dimensions: 1200 x 1200 mm Distance between tie bars: 820 x 820 mm Mold height: 380 - 825 mm Opening stroke: 770 mm Maximum mold distance: 1595 mm Ejector force: 96 kN Ejector stroke: 230 mm Weight: 21,000 kg Dimensions (m) L x W x H: 8.02 x 2.21 x 2.57 m Control: NC5 Equipment: - Hydraulic core pull: 4 (+ 2 additional connections on the stationary platen) Pedpfx Ansz E Imwoyorb - Hydraulic cascades: 4 - Hot runner adjustment points (zones): 40 - Servo-controlled activeDrive hydraulic pump (energy-efficient) - Adjustable p+v injection in a closed-loop system - Wear-resistant screw, bimetallic cylinder - Automatic mold height adjustment - Closing force adjustment - activeProtect mold protection - Switching to pressure-dependent clamping (WID) - PDE process data recording, 100% control - 8-circuit cooling water regulator - EUROMAP 67 interface - World Connect - remote service - DR 832 CNC robot and safety fence included

Condition: excellent (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, machine/vehicle number: ERGOTECH 200 - 840, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, mold height (min.): 340 mm, plate width: 860 mm, plate height: 860 mm, pump power: 30,000 W, The machine is fully operational and was working with injection until the end. Predpfxeyxn Tvj Anyeb

Condition: ready for operation (used), Year of construction: 2005, clamping force: 6,500 kN, screw diameter: 80 mm, injection weight: 1,600 g, Hydraulic injection moulding machine manufactured in 2005. This DEMAG D 650 features a clamping force of 6500 kN and a screw diameter of 80 mm. It offers a shot weight of 1,600 g and includes a handling system by Wittmann. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 650 machine we have for sale. Contact us for further details. • Hydraulic Core Pulls: 4 • Hydraulic Cascade: 8 Prodpfx Anez E Hiksysb • Hot Runner Control Zones: 16 • Handling System: Wittmann W 843 Pro 0815 • Handling System Year of Manufacture: 2021 • Z-axis Travel: 3,000 mm • Y-axis Travel: 2,000 mm • X-axis Travel: 1,200 mm • C-axis: Servo, 180° • B-axis: Servo, 270° • Machine in very good overall condition • Annual maintenance has been carried out

Condition: ready for operation (used), Year of construction: 2007, operating hours: 91,250 h, clamping force: 13,000 kN, screw diameter: 110 mm, injection weight: 5,200 g, Hydraulic injection moulding machine manufactured in 2007. This DEMAG D 1300 features a clamping force of 1300 t and an injection weight of 5200 g. It includes a handling system with a Wittmann DR 853 robot, offering impressive Z, Y, and X-axis strokes of 3500 mm, 2500 mm, and 1600 mm respectively. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 1300 machine we have for sale. Contact us for further details. - Control Brand / Model: Demag NC4- Hydraulic Core Pulls: 4- Hydraulic Cascades: 12- Hot Runner Control Zones: 32- Handling System / Robot: Wittmann DR 853 227 (YOM 2014)- Robot Z-Axis Stroke: 3500 mm- Robot Y-Axis Stroke: 2500 mm- Robot X-Axis Stroke: 1600 mm- Robot C-Axis: 90°- Robot B-Axis: Servo 270°- General Condition: Very good overall condition, annual maintenance performed, currently under power / in series production Psdpfx Anjz E Hh Hsyjrb

Condition: ready for operation (used), Year of construction: 2015, operating hours: 41,610 h, clamping force: 4,118 kN, screw diameter: 70 mm, Hydraulic injection moulding machine manufactured in 2015. This DEMAG D 420 features a clamping force of 420 t and an injection weight of 1100 g. It includes a handling system with impressive working strokes of Z=2500 mm, Y=1600 mm, and X=900 mm. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG D 420 machine we have for sale. Contact us for further details regarding this machine. Pjdpfez E Hhysx Anysrb - Control Unit: NC 5- Injection Weight: 1,100 g- Core Pulls (Hydraulic): 4- Hydraulic Cascades: 4- Hot Runner Zones: 40- Handling System / Robot: Wittmann DR 832 0989 (YOM 2015)- Robot Linear Axes: Z=2500 mm (Horizontal), Y=1600 mm (Vertical), X=900 mm (Demolding)- Robot Servo Wrist Axes: C-Axis servo 180°, B-Axis servo 270°

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Prsdjzbg Ezjpfx Anysb Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Year of construction: 1992, condition: used, Technical details: lifting capacity: 12,5 t span width: 9000 mm stroke speed: 5 / 0,8 m/min rope diameter: 14 mm lifting height max. hook position: 10.000 m total power requirement: 13,6 kW weight of the machine ca.: 5,2 t dimensions L x W x H: Brücke: ca. 10,3 x 2,2 x 2,3 (3,15to) m dimensions L x W x H: Laufträger Nr.1: ca. 4,38 x 0,8 x 0,7 (1,01to) m dimensions L x W x H: Laufträger Nr.2: ca. 4,38 x 0,8 x 0,7 (0,99to) m dimensions L x W x H: Pal. Zubehör ca. 4,2 x 0,8 x 0,4 (0,16to) m Podpfx Anjvbh Rhoysrb Crane classification according to DIN 15018H2B3 Crane trolley: DEMAG type RF 400; type KBF 100 A8/2, travelling speed 12.5 / 50 m/min., size of travel wheels Ø 200mm (16 pcs.) Main hoist trolley EKDH 532 H20 KV3-4/1 F6; type KBF 90 A8/2, travelling speed 5 / 20 m/min., size of travel wheels Ø 160mm (4 pieces) DEMAG DH5 32 hoist; lifting height 10,000 mm; braked with sliding carriage; main lifting speed 5 / 0.8 m/min. Single hook size 5 with rope safety device Rope Ø 14mm; rope length 46 metres; drive unit group 1Bm Bridge Hoisting gear Trolley/crab Wireless remote control and conventional control *