Milling machining centers - vertical

DMG DMC 635 V

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, spindle speed (min.): 10,000 rpm, Technical data: Travel X-axis: 635 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Manufacturer: Deckel Maho Year of manufacture: 2012 Control: SIEMENS 810D with ShopMill Type of control: CNC Power-on hours: 20,135 h Spindle hours: 7,673 h Total power requirement: 13 kW Condition: As new Description We are selling a 3-axis machining center DMG DMC 635 V ecoline in excellent condition. The machine has been fully measured and stands out due to its extensive equipment. Fgedpext N N Eofx Aa Nsi The machine is from 2012 but has only 7,012 spindle hours. The machine has seen very little use and its geometry is close to that of a new machine. Machine features: - Tool measurement (hardware and software) - Workpiece measurement (hardware and software) - Chip conveyor - 30-position tool changer - Through spindle coolant (20 bar) - Spindle 10,000 rpm - Tool holders - SIEMENS 810D control with ShopMill

Condition: good (used), Year of construction: 2006, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, table width: 1,000 mm, table length: 600 mm, table load: 500 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, Accessories: Approx. 40x SK-40 tool holders (without cutting tools) Fgsdpfx Asxcpkzsa Nsi Operating hours: 32,379 h (as of July 9, 2024) Spindle running time: 15,674 h (as of July 9, 2024) Clamps on table are not included! Machine available from: Imediately

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 30, Equipment: CE marking, chip conveyor, documentation/manual, VERTICAL MACHINING CENTER DMG MODEL DMC 635V TRAVELS: 635x510x460 mm TOOL CHANGER RANOM 30 POSITIONS SPINDLE 10,000 RPM HIGH PRESSURE THROUGH SPINDLE CHIP CONVEYOR REMOTE HANDWHEEL HEIDENHAIN HR410 Fodpjxq E Daofx Aa Nsgi

Condition: used, Year of construction: 2011, x-travel 635 mm y-travel 510 mm z-travel 460 mm Control Heidenhain TNC 620 turning speed range 20 - 8.000 U/min number of tool places 20 Pos. tool taper SK 40 table surface area 790 x 560 mm spindle drive 13 kW Number of working hours ca. 3.870 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. Fsdpoxp R Egefx Aa Nogi Technical Features & Accessories: - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Revolution per minute: 20 - 12 000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Fedsw A I Uuepfx Aa Nsgi Weight approx.: 3,6 t tool taper: SK 40 range of revolution per miute: 20-10.000 U/min Tool changer: 20-fach dimension machine xH: 3,0 x 2,0 x 2,15 m

Condition: ready for operation (used), Year of construction: 2011, operating hours: 2,265 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Machine weight 5500 kg Control Unit Brand Siemens Model Sinumerik 810D Powerline Main Drive Spindle speed range 10000 rpm Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Table Table load 600 kg Fgsdoxnr Hiepfx Aa Nji Tools Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V eco was manufactured in 2011. It features a Siemens Sinumerik 810D Powerline control system, a tool holder SK 40, and a tool magazine with 20 positions. The machine offers a spindle speed of up to 10,000 rpm and a rapid traverse speed of 25 to 30 m/min in X/Y/Z axes. Consider the opportunity to buy this DMG DECKEL MAHO DMC 635V eco vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, The machine is in good technical condition, connected to power, and can be tested. Control system: Heidenhain iTNC 530. Fsdpfx Aexpxigja Negi

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: Siemens, spindle speed (min.): 12,000 rpm, Equipment: chip conveyor, DMC 635 V, Year of manufacture 2005, with Siemens 840 D control and operating mode 4 Main drive: Motor spindle, 12,000 rpm, SK 40 Feed drive: AC servo motors for X, Y, Z axes Feed rate: infinitely programmable, mm/min up to 20,000 Feed force: 5,000 N Input increment: 0.01 mm Rapid traverse: 30 m/min Position feedback system resolution: 0.001 mm Working range: X-axis 635 mm, Y-axis 510 mm, Z-axis 460 mm Tool changer: Double gripper, 20 magazine positions Max. tool diameter (without free adjacent slots): 80 mm Fjdpfx Aew Nfbwja Nogi With free adjacent positions: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight for automatic tool change: 6 kg Work table: 790 x 560 mm Spacing of T-slots: 100 mm Number of T-slots / size: 4 pcs. H12 Locating slot / size: 1 pc. 14 H7 Max. table load (centered): 600 kg Floor to top of table: 720 mm Chip conveyor: scraper belt Tank capacity: 200 liters Delivery rate: 22 l/min Delivery pressure: 3.7 bar Coolant nozzles: 6 pcs. Discharge height: 800 mm Chip discharge chute dismantled: 1,100 mm Connection data: I n max. at 100% duty cycle 50 A, Power consumption at 100% duty cycle 35 kVA Max. main fuse: 64 A Machine weight: 3,670 kg, Installation weight: 4,470 kg

Condition: excellent (used), Working travels 635 x 510 x 460 mm Table size 790 x 560 mm Spindle taper SK40 Spindle speeds -14'000 rpm Fodpferx Spmsx Aa Nsgi Tool changer 30 Pos. Control HEIDENHAIN iTNC-530 3D measuring taper Chip conveyor Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Control : Heidenhian Fgodpfx Aaexgk Nms Noi Spindle 12,000rpm Taper : BT40 ATC 30 Immediate Delivery

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,729 h, General Data Measurements width 2530 mm Measurements depth 2050 mm Measurements height 2650 mm Machine weight 5500 kg Main Drive Spindle speed range 10000 Number of axis 3 Movement X-Axis Movement 635 mm X-Axis Rapid Traverse 25–30 m/min Y-Axis Movement 510 mm Y-Axis Rapid Traverse 25–30 m/min Z-Axis Movement 460 mm Z-Axis Rapid Traverse 25–30 m/min Fodpfx Ajxnd I Soa Njgi Table Table load 600 kg Tools Number of station 20 Max tool diameter 80 mm Max tool length 300 mm Type of tool holder SK40 This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. It's a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, The machine is in good technical condition, connected to power, with the possibility to test the Siemens 810D control system. Fodpfoxpxhpex Aa Njgi

Condition: ready for operation (used), Year of construction: 2011, operating hours: 4,818 h, Control Unit Brand Siemens Model 810D Main Drive Spindle motor power 13 kW Number of axis 3 Tools Type of tool holder SK 40 Control Unit Brand Siemens Model 810D Main Drive Spindle motor power 13 kW Number of axis 3 Tools Type of tool holder SK 40 This 3-axis DMG DMC 635 V eco was manufactured in 2011. It features a vertical milling spindle with a tool holder SK 40, capable of speeds up to 8,000 min-¹. The machine offers a maximum drive power of 13 kW and a rapid traverse rate of 25 m/min. Ideal for complex machining tasks, consider the opportunity to buy this DMG DMC 635 V eco vertical machining centre. Contact us for more information about this machine. Fgjdpfsxa H Ulex Aa Nji Application Types Milling