5 axis universal machining center

DMG DMU 100 EVO

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Dcodpfxoyit Uls Aqcoh

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC-Steuerung Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Dcodpey H Epwefx Aqcoh Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 2006, x-travel 1.250 mm y-travel 1.000 mm z-travel 1.000 mm Control MillPlus B-axis (head) -10 - +180 x 0,001 ° C-axis (table) 360 x 0,001 ° Dodpfx Aqjyui Ncscsch feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min tool taper HSK 100 spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 38,00 KW max. torque at 40% / 100% load 288 / 187 Nm table surface area Ø 1.100 mm table load 1,50 t toolpiece magazine: chain magazine 120 Stück tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg rotary table speeds infinitely variable 10 - 500 U/min total power requirement 85,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 9,00 x 6,50 x H3,50m m 5-axis turning/milling machining center with MillPlus IT FD control; dual pallet changer; coolant system; coolant through the spindle; chip conveyor; rotating viewing window; electronic handwheel. Spindle new 10/2025 Turning-table overhaul 2022

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Dcodpewh Sigsfx Aqcoh Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit - Dielectric

Condition: used, Year of construction: 2007, x-travel 1.250 mm y-travel 1.000 mm z-travel 1.000 mm Control SIN840D pl Dedpfxoy E Tvio Aqcech C-axis (table) 360 x 0,001 ° B-axis (head) -10 - 180 x 0,001 ° rotary table speeds infinitely variable 10 - 500 U/min feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min tool taper HSK 100 spindle turning speed - stepless programmable 20 - 8.000 1/min spindle turning speed - gearbox stage 1 20 - 1.600 1/min. spindle turning speed - gearbox stage 2 1.600 - 8.000 1/min. power capacity at 100 % load 19,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 727 / 492 Nm table surface area Ø1.100 mm table load 1,50 t tool magazine with 240 tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg total power requirement 85,00 kW weight of the machine ca. 32,50 t dimensions of the machine ca. 9,50 x 4,80 x H3,80m m 5-axis machining center with turning function and pallett changer. Control SIEMENS SINUMERIK 840D powerline, Operating Mode 4, Tool-Magazin with 240 places, coolant filter system 980 liter, chip conveyor, coolant through the spindle, RotoClear.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 6,417 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 4,400 kg, number of axes: 4, This 4-axis AgieCharmilles FORM 30 was manufactured in 2017. It features a stroke of 600mm x 400mm x 400mm, with axis speeds up to 6 m/min. The machine can handle workpiece weights up to 1000kg and dimensions of 1000 x 700 x 400 mm. It includes a dielectric unit with a 750l capacity and a robust weight of 4400kg. Consider the opportunity to buy this AgieCharmilles FORM 30 die-sinking EDM machine. Contact us for more information about this machine. • Axis speed (X/Y/Z): 4 / 4 / 6 m/min • Position reading accuracy (X/Y/Z): 0.1 µm • C-axis (standard) rotation speed: 0–100 rpm • Work tank size: 1200 x 800 x 500 mm • Worktable size: 800 x 600 mm • Max electrode weight: 100 kg • Max workpiece weight: 1000 kg • Workpiece dimensions: 1000 x 700 x 400 mm Dsdpfx Asx Nr N Noqcjch • Dielectric unit capacity: 750 l • Generator type: ISPG • User interface: AC FORM HMI • Power supply: 3 x 380 V, 3-phase, 50 Hz

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, table load: 1,500 kg, spindle speed (max.): 20,000 rpm, number of axes: 4, This 4-axis +GF+ Mikron Mill E 1200 was manufactured in 2021. It features a spindle speed of 20,000 rpm, HSK A63 tool magazine, and rapid traverses up to 40 m/min. The work table measures 1450 x 600 mm with a maximum load of 1500 kg. Additional features include a Lehmann 4-axis rotary table and a liftable chip conveyor. Consider the opportunity to buy this +GF+ Mikron Mill E 1200 vertical machining centre. Contact us for more information. Dsdpfx Aqoyb Sifococh • Tool magazine: DT30, HSK-A63 • Rapid traverse: X/Y 40 m/min; Z 35 m/min • Table size: 1450 x 600 mm • T-slots: 5 • Spindle cooling system – 20 kHz • Linear scales: MILL E 1200 linear scales • Machine status light Additional equipment • Liftable chip conveyor • Chip trolley • Washdown system • Oil separator • Remote electronic handwheel • TS35.10 tool presetter (TNC 620) • IRP40.02 HSK63A measuring system • Lehmann 4-axis rotary table Technical Specification Taper Size HSK 63

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, GF AgieCharmilles FORM 300 Year of manufacture: 2014 Die-sinking EDM machine in C-frame design (fixed table) with automatic lowering tank Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Table dimensions: 750 x 600 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg Innovative ISPG Generator (Intelligent Speed Power Generator) for maximum efficiency Maximum working current: 80 amps Surface finish up to Ra 0.08 µm Dedpfx Aox Sv E Hjqcsch AC FORM HMI with intuitive user interface & touchscreen Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Pneumatic chuck of your choice (Erowa or 3R Systems) Includes 6-position electrode changer LTC Machine dimensions: 2265 x 2110 x 2780 mm Total weight: 4,500 kg The machine will be cleaned, overhauled and extensively tested prior to sale to ensure the highest quality and reliability. We are also happy to offer you additional services: - Transport - Commissioning - Training - Accessories such as clamping devices

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles FORM 2000 HP Year of manufacture: 2011 C-frame design, fixed table with drop tank Travel paths (X/Y/Z): 400 x 300 x 350 mm Distance table to quill: 170-520 mm Max. workpiece size (L x W x H): 820 x 580 x 250 mm Max. workpiece weight: 800 kg Integrated C-axis for rotation, indexing, and erosion (U=0-100 rpm) Pneumatic chuck of your choice (Erowa / 3R Systems) ISPG generator with 60 amperes Best achievable surface finish Ra 0.10 µm Dcsdpfxsx Eilde Aqcjh AGIEVISION 5 control interface 15” LCD color monitor, mouse or touchscreen, keypad, and manual control unit Including CAPA electrode changer - 40 electrode positions Net weight of the system: 3830 kg Machine dimensions: 1410 x 2460 x 2660 mm The machine will be cleaned, serviced, and tested by us upon receipt of order. Optional: - Commissioning and training - Transport and installation - Cooling unit - Dielectric fluid

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,600 kg, total height: 2,780 mm, total width: 2,265 mm, total length: 2,110 mm, quill stroke: 450 mm, workpiece length (max.): 1,220 mm, workpiece width (max.): 870 mm, workpiece height (max.): 470 mm, GF AgieCharmilles FORM P600 Year of manufacture: 2021 Powerful and precise die-sinking EDM machine specifically engineered for demanding applications in tool and mold making. Thanks to its state-of-the-art control system, excellent surface finish, and high efficiency, it presents an outstanding investment opportunity for companies valuing precision and cost-effectiveness. Key Features & Benefits: ✅ Large working area & high load capacity: Travel ranges (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1,220 x 870 x 470 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Accurate positioning ensured by linear glass scales (no recalibration required) Innovative ISPG generator (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Surface finish up to Ra 0.08 μm Dedpfx Ajyizmieqcech ✅ Powerful control system & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM integration for seamless data transfer Job management with prioritization and real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 16-position electrode changer for unattended machining Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-frame design for high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with low maintenance requirements Ideal for: ✔ High-precision tool and mold machining ✔ Series production with stringent quality demands ✔ Complex geometries and fine surface textures The machine will be cleaned, serviced, and thoroughly tested after your order to guarantee top quality and reliability. We are also happy to commission the machine at your facility after delivery.