Surface grinding machine

ELB-Schliff

Year of construction: 1988, condition: used, Operating voltage: 3x 380V, frequency: 50Hz, rated current: 40A, fuse protection: 50A, control voltage: 220V, DC voltage: 215/323V, an on-site inspection is possible. Itjdpfx Agoz S Iw Ds Asn

Condition: good (used), Year of construction: 1997, Max. sanding length 1,400 mm Max. sanding width 610 mm Max. sanding height 550 mm Max. longitudinal stroke 1,480 mm Max. cross stroke 560 mm Ijdpfor A Evrox Ag Astn Infinitely variable table speed 1 - 30 m/min Grinding wheel size 406 x 51 x 172 mm Max. table load 1,800 kg Total power supply 20 kW Machine weight approx. 6,500 kg

Condition: ready for operation (used), functionality: fully functional, ELB SWN 5 VA / Horizontal surface grinding machine -Grinding area X/Y/Z 525x375x255mm -Magnetic table 700x300mm -Table clamping surface 900x250mm -Table longitudinal travel 10 - 625mm -Table load max. 280 Kg -Table feed rate 1 - 30 m/min -Oscillating grinding 3 - 30 m/min -Distance from table to spindle center 525mm -Vertical feed rate 2 - 180 mm/min Itsdpfxsz Sr Ume Ag Aon -Step size adjustable 0.001 - 2mm -Grinding wheel speed 3000 rpm -Coolant system -Machine feet -Documentation -Complete technical data, see photos Dimensions: L x W x H 2.7 x 2.2 x 2 meters / Weight 3500kg Errors and omissions excepted.

Condition: used, Year of construction: 1991, grinding length 600 mm Ijdpfjzycnnjx Ag Astn grinding width 375 mm workpiece height 375 mm workpiece weight 300 kg table surface area 900 * 350 mm grinding spindle speed 1500 / 3000 U/min dimensions of grinding wheel 300 x 50 x 76,2 mm weight of the machine ca. 3,3 t dimensions of the machine ca. 3,1 x 2,6 x 2,1 m MICRO GRANIT has excellent properties for high-precision grinding machine construction. Damping properties: 1:10 ratio compared to gray cast iron, ensures the best grinding quality. Thermal behavior: suitable for grinding operations with µ tolerances. X-axis – table longitudinal movement: - Table switching: extremely quiet, contactless. - Quick adjustment: via cams. - Work table: Mehanit cast iron. - Guide system: two precision flat guides. - Lubrication: plastic coating. - Drive: hydraulic, automatic. - Table stroke: 100–250 mm. - Table speed: 40 m/min. - Switching: via cams, contactless. - Hydraulics: horizontal monoblock. - Table cycle: 30 min. Y-axis – Vertical adjustment of the grinding wheel: - Play-compensating mechanism: > ensures even contact with the guides. - Vertical movement: > via precision lead screw. - Drive: adjustable electric motor.

Condition: ready for operation (used), Year of construction: 1985, A conventional precision surface grinding machine with NC control is available. Resolution: 0.001mm, travel X/Y/Z: 1200mm/550mm/400mm, table dimensions X/Y: 1600mm/450mm, table feed: 30m/min, max. table load: 750kg, spindle-table distance: 800mm, Y feed: 180mm/min, Y precision: 0.001mm, Z feed: 1200mm/min, Z precision: 0.3mm, speed: 2800rpm, grinding wheel dimensions X/Y/Z: 400mm/100mm/127mm. Machine dimensions X/Y/Z: approx. 6500mm/3000mm/2500mm, weight: approx. 6700kg. Documentation available. On-site inspection is possible. Itsdpfxswaa Ius Ag Aen

Condition: used, Year of construction: 1990, grinding length 600 mm grinding width 375 mm workpiece height 325 mm grinding height 325 mm Iedpoz N Hvaefx Ag Aetn table load max. 300 kg table longitudinal travel max. 650 mm table speeds 1 - 30 m/min grinding spindle speed 1440 / 2900 U/min grinding wheel size 300 x 50 x 76,2 mm grinding spindle drive 3,7 / 4,7 kW vertical feed grinding spindle max. 180 mm/min. cross travel 350 mm cross adjustment 1 - 40 mm rapid traverse cross 1200 mm/min total power requirement 9 kW weight of the machine ca. 3,3 t dimensions of machine L x W x H 2,75 x 2,10 x 2,05 m - with autom. positioning - Accessories: magnetic plate 600 x 350 mm, grinding wheel with flange, wheel trueing attachment, DRO on Y-and Z-axis, 1 grinding wheel and various flanges separate, balancing scale, wet grinding attachment

Condition: used, machine/vehicle number: 62220966, Max. grinding wheel diameter: approx. 250 mm, grinding area: 350x150 mm, with magnetic clamping plate, machine light, and coolant system. Itsdpfx Ajz Nhr Nsg Asn

Condition: ready for operation (used), Year of construction: 2020, Taiwan Palmary Surface Grinding Iedpfx Aey N Rkxjg Aetn Model : PSG-C60100AHR Year 2020 Max. Grinding surface 1,000mm x 600mm Electro-Magnetic chuck MPG Overhead Dresser Automatic grinding cycle 0.001mm - 0.03mm auto grind Spindle 1,750 rpm Wheel dia.405x50x127mm Good Price

Condition: good (used), Grinding range 400x250x375mm Itedpfefbx Dwjx Ag Aen Wheel diameter 300mm Magnetic plate 400x250mm MARCELS MASCHINEN CH

Condition: used, Year of construction: 1976, Surface grinding machine Manufacturer: Elb Type: ELB Schliff SW 07 Year of manufacture: 1976 Ijdpfxezt U Nqe Ag Aotn Travel distance X-axis: 700 mm Travel distance Y-axis: 350 mm Travel distance Z-axis: 350 mm Weight: approx. 3,000 kg 121026ä

Condition: used, Year of construction: 1990, 1000 x 600 mm magnetic plate size 1000 x 600 mm grinding height max 400 mm grinding wheel width x diameter 400 x 60 x 127 mm dimensions 3900 x 20 50 x 2400 m ja Ijdevanvujpfx Ag Ajtn weight of the machine ca. 6 t

Condition: used, machine/vehicle number: 163811079, grinding length:1000 mm grinding width:550 mm workpiece height:400 mm surface area:1300x450 mm cross feed motor:0,55 kW grinding wheel speeds:1400 U/min total power requirement:18 kW weight of the machine ca.:4800 kg Used / overhauled surface grinding machine, Make ELB, type SWBE 010 NCK, machine no. 163811079 Machine with automatic notification in all 3 axes. Overhaul scope: Itsdoi E T Ihopfx Ag Aen Machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. All guideways new eingeschabt on Neumaschinengeometrie. Wear parts replaced defective components reparariert or replaced. Reassembly, compl. Functional testing and internal loss. Machine repainted. Machine in perfect, produktionsbereitem state. Accessories: - Vertical feed with pre-selectable active digital display, direct measuring system Heidenhain - Electric magnetic chuck with straight coarse / fine pole pitch, dimensions 1000 x 500 mm - Demagnetisiereinrichtung installed in the control cabinet - Electromotive preselectable automatic dresser with dressing compensation - Splash guards - Complete coolant system with paper band filter - Setting up / leveling -. Technical documentation in German All machines are connected prior to delivery, tested and verified all of the functions. Payment: 50% deposit with order, 50% after acceptance in our factory, before loading Warranty: No Paint: new coat of paint to your specifications On request, the machine can be equipped with an extra charge Diaform / Grinding Wheel. Fig. Similar.

Condition: used, Year of construction: 1988, machine/vehicle number: 19981, grinding length:600 mm grinding width:550 mm workpiece height:320 mm weight of the machine ca.:4,3 t Itjdpsi E T Idsfx Ag Aen

Condition: not inspected (used), Year of construction: 1999, grinding length: 1,730 mm, grinding width: 930 mm, total height: 550 mm, 3 automatic axes spindle speed variator feedrate variators grinding wheel 400x60x127mm Iodozl Rxlspfx Ag Astn magnetic chuck weight 6500 kg

Condition: used, grinding length:650 mm grinding width:450 mm workpiece height:425 (ohne Magnetplatte) mm max. workpiece weight:600 kg Itsdpfx Ajfkg H Tjg Asn weight of the machine ca.:3,8 t total power requirement:15 kW machine dimensions approx. WxHxD:3,0 x 2,4 x 2,3 m Used/reconditioned surface grinding machine, make GER, type RSA-650. Automatic infeed in all 3 axes. Machine geometrically overhauled, repainted (RAL6011, green), all functions tested, accuracy checked. OVERHAUL SCOPE: Machine completely disassembled, all components thoroughly cleaned and tested for complete functionality. Main spindle newly mounted, concentricity 3 µ. All guideways newly scraped in new machine geometry. Wear parts replaced, defective components repaired or replaced. Reassembly, complete functional test and internal acceptance. Machine repainted. Machine in perfect condition, ready for production. MEASURED GEOMETRIC ACCURACIES: Actual geometric accuracy after overhaul, measurement with dial gauge. Geometry of machine axes X and Z X = longitudinal axis 650 mm Z = transverse axis 450 mm Measurement magnet traversed with dial gauge. X axis = Max. Deviation 0,008 mm Z axis = Max. Deviation 0,005 mm INCL. THE FOLLOWING ACCESSORIES: -Electro-magnetic clamping plate, with fine longitudinal pole pitch. dimensions 600 x 400mm -demagnetizing device -Complete coolant device with paper band filter - Digital display of the vertical axis (Y-axis), make Sony -Technical documentation in English language -1 pieces grinding wheel holders -1 piece grinding wheel dresser, mounted above the grinding wheel with manual infeed and automatic (hydraulically operated) transverse movement - 1 set of setting elements You can find more information in the attachment. Payment: 100% before loading the machine Warranty: 6 months on the geometry and the new parts demonstrably installed. No general legal warranty.