Semi low-loader

EMTECH NNR48 3 ASSER HYDRAULISCHE GESTUURDE KORTE UITS...

Condition: excellent (used), axle configuration: 3 axles, color: blue, Year of construction: 2019, Equipment: ABS, = Additional Options and Equipment = - Lifting axle - Air suspension = Further Information = Year of manufacture: 2019 Rear axle 1: Twin tires; Steering Rear axle 2: Twin tires; Steering Rear axle 3: Twin tires; Lifting axle; Steering Technical condition: very good Visual condition: very good Price: On request ROJO TRAILER KT3 ST EXTENDABLE SEMI LOW LOADER 3x SAF hydraulic steering axles Last axle is liftable Remote control Air suspended Tyre size: 245/70/R17.5 Neck length: 308 cm Extendable loading platform Loading platform length: 678 cm + 300 cm extendable (total loading platform length: 978 cm) Width of loading platform: 254 cm Cedpfx Ahsuxxc To Iopw Loading deck height: approx. 89 cm Kingpin to rear of low loader: 927 cm Total length: 987 cm 4x hydraulic support legs Lashing eyes/rings Prepared for twistlocks for 20 ft container Follow us on Instagram, Facebook, and TikTok to see videos of our trucks, commercial vehicles, and machines available for sale. Wir sprechen Deutsch We speak English Hablamos Español

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually Cpsdpfjtx Nwnsx Ah Iew * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: new, axle configuration: > 3 axles, total length: 9,300 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R17.5, wheelbase: 1,360 mm, color: blue, Year of construction: 2023, Equipment: tail-lift, Colour: Blue Payload weight: 54,465 kg Main Features: Manufacturer: Faymonville Model: MAX 110-Z-4AA-9.30-U Chassis number: YAMT14XX4N0107629 Year: New and unused (2023) Weights/Loading Capacity: King-pin load: 23,000 kg Axle load: 12,000 kg (per axle) Total axle load: 48,000 kg Gross vehicle weight (GVW): 71,000 kg Empty weight: 16,535 kg Payload: 54,465 kg Axles: - Axle brand: BPW - Hydraulic steering - Pneumatic suspension with raising/lowering valve - WABCO braking system - Tyres: 245/70 R17.5 Michelins (Load index 146/146 F) - 1st axle liftable Dimensions: Loading length: 9,300 mm Extensions: 6,500 + 6,800 mm Loading floor width: 2,540 mm Loading height: 900 mm Additional Equipment: - Double extendable loading platform - Container locks - Width outriggers + timber infills for width extension - Lashing rings - Double folding ramp set - Central lubrication - 1x spare wheel + holder - JOST landing gear - 24V electrical system - 2.0" king-pin - One galvanized steel headboard - Electrically driven hydraulic pump - Manual steering - Twist locks = Further Information = General Information: Year of manufacture: 2023 Axle Configuration: Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; lift axle; Max. axle load: 12,000 kg; Steerable; Axle brand: BPW; Tyre tread depth (left inside/outside, right inside/outside): 100% each Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steerable; Tyre tread depth: 100% each Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steerable; Tyre tread depth: 100% each Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steerable; Tyre tread depth: 100% each Weights: Unladen weight: 16,535 kg Payload: 54,465 kg Gross vehicle weight: 71,000 kg Cpjdpfxeuu Hcfo Ah Isw Functional: Loading height: 900 mm (manufacturer’s specification; previously given as 65535 cm is a clear data error) Extendable body: Yes Condition: General condition: Very good Technical condition: Very good Optical condition: Very good Financial Information: Price: On request Further Information: Please contact Stefan Schaapveld for further details.

Condition: new, overall weight: 32,000 kg, axle configuration: 2 axles, loading space length: 12,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 2-axle stepped saddle plateau with Fassi F545 crane Mega Lowliner Chassis Welded construction with cross beams made entirely of high-quality steel Neck height = approx. 220 mm including coupling plate with all necessary chassis reinforcements and cross connections Axles 2 BPW axles with a load capacity of 10,000 kg each with 17.5" drum brakes ABS: 1 axle sensing Wheelbase: 1,810 mm Tires 8-wheel type 235/75 R17.5 Rims Aluminum rims, 10-hole, centered, ET= 122 mm Lighting system 24V lighting system in accordance with EU directives 76/756/EEC ff. with: 2x2 three-chamber LED lights 1x reversing light LED 1x LED fog light LED side marker lights Lane departure lights License plate illumination 2x 7-pin sockets + 1x 15-pin socket connected according to EU standard Floor Galvanized grating covering on drop deck Steel tear plate in the axle area Load securing Outer frame with lashing hole profile D030 mm in the slope 2x12 lashing points 8,000 daN in the outer frame 3x combi row of stanchion pockets for 80x80 mm stanchions in the drop deck Accessories 2x wheel chocks with holder Spare wheel holder Winch 2x storage box with drawer (chain storage) Surface protection Steel construction: blasted and primed Coloring Chassis/frame/floor frame: single color in RAL 3020 (traffic red) Axle hubs: single-colored in RAL 3020 (traffic red) Axles: KTL-coated black Rims: Aluminum Durabright With Fassi F 545 RA.2.28 XE-Dynamic Hydraulic outriggers Csdpfx Ahon Hrtgs Iopw Additional support beam 360 ° working range approx. 90 % to the front For further information please do not hesitate to contact us

Condition: new, maximum load weight: 34,660 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Loading area: * Loading platform in double-extendable design with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing gear: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice Axles: * BPW axles, hydro-mechanically forced steering * Air suspension with lift and lower valve * Axle tool kit Brake system: * Brake system compliant with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: * Top quality, long-lasting corrosion protection of the standard shot-blasted welded chassis, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-colour in RAL 3002 carmine red * Rear section metallised and painted in RAL 9010 (pure white) * Wheel rims in silver * Metallic paintwork not possible Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets; connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including accessories: * Remote steering from front and rear via cable remote control with push buttons, with single-track axis control (without installation in the tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with bracket on front wall * 2-inch king pin * Yellow-red air couplings on galvanised front connection panel * Yellow reflective tape according to EU regulations – on the sides, on the sliding extension and at the rear of the trailer * European reflective warning plates (red-yellow) at the rear of the trailer * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Loading area with heavy-duty hardwood floor * 10 pairs of stake pockets for plug-in stakes, 100 x 50 mm, in the outer frame * Bracket for rotating beacon at the rear * Galvanised supports under the loading area taper * Bracket for rotating beacon at the rear * Hook-in profile for ALU loading ramps at the rear of the vehicle * 80 km/h speed stickers, rear and both sides * Load gauge for axle load determination, including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high Codpfek Ugacjx Ah Iepw * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard grease NLGI-2 and removable guard around the pump * Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m length, max. 250A) between trailer and tractor unit with connector (NATO-NATO) * Anti-slip sand layer painted onto the centre beam * 6 pairs of WADER container pockets in the loading platform, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; in the extension, an additional ...

Condition: used, empty load weight: 9,480 kg, maximum load weight: 31,520 kg, first registration: 03/2020, next inspection (TÜV): 04/2024, total length: 11,500 mm, total width: 25,500 mm, total height: 38,000 mm, suspension: air, tire size: 245/70 R 17.5/10mm, wheelbase: 1,800 mm, front tire size: 245/70 R 17.5/10mm, operation weight: 41,000 kg,

Condition: used, empty load weight: 28,700 kg, overall weight: 98,000 kg, axle configuration: > 3 axles, first registration: 07/2009, next inspection (TÜV): 05/2026, tire size: 285/70 R19,5, color: yellow, Equipment: ABS, Drum brake EBS Payload 69,300 kg Mercedes-Benz Arocs 2663 LS heavy-duty tractor unit Color: yellow 591,100 km Roadworthiness inspection (HU): 09/2026 Diesel Urea tank (AdBlue) First registration: 09/2017 Displacement: 15,569 cc 460 kW ABS On-board computer Differential lock Hydraulics (PTO) Tipper hydraulics Lane assist EBS ESP Low noise Navigation system Parking heater Cpodsx Nqibjpfx Ah Iow Stationary air conditioning Cruise control Traction control Additional headlights Euro 6 C 3 axles Wheelbase: 3,400 mm Tire size: 385/65 R22.5 - 315/80 R22.5 Perm. total weight: 26,000 kg Payload: 15,425 kg Unladen weight: 10,575 kg Retarder Fully automatic transmission Leaf-air suspension Turbo retarder clutch Technically possible gross combination weight: 70,000 kg at 12% / 100,000 kg at 8% Engine-side PTO Sun visor Beacon lights Air horns Air-suspended cab 1 bunk VIN: 10167342 Subject to errors and omissions.

Condition: used, Year of construction: 2008, Extendable superstructure: Yes Production country: DE Please contact Theo Lelie for more information Cpjdoxixpaopfx Ah Iew

Condition: used, functionality: fully functional, empty load weight: 16,300 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: other, tire size: 205/65 R 17,5, color: green, Equipment: ABS, EBS, - 5 axles: 1st axle friction-steered and liftable; 2nd–5th axle hydraulically steered - Extendable: 6,200 mm (total length: 12,800 mm – 19,000 mm) - SAF axles - Sliding hydraulic double ramps with support legs Csdpfx Ajymnmwoh Iepw - Lifting and lowering device - Drum brakes - Suspension: air-lift Errors and omissions excepted.

Condition: used, empty load weight: 5,780 kg, maximum load weight: 20,920 kg, overall weight: 26,700 kg, axle configuration: 2 axles, first registration: 06/2011, next inspection (TÜV): 06/2024, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 3,200 mm, suspension: air, wheelbase: 1,300 mm, Year of construction: 2011, gearing type: other, driver cabin: other, Equipment: ABS, * German semi-trailer * 1st owner * Special low-loader trailer from premium manufacturer Meusburger Cpedsrkn R Topfx Ah Ijw * Model MPG - 2 * Superstructure with sliding roof device * Enables side loading * Also allows loading from above and rear * Ideal for transporting heavy goods, equipment, construction machinery, vehicles, etc. * 21 t payload * 3x 4.2 t load capacity Altec loading ramps * Ramp compartment * Sliding tarpaulin left & right with Edscha sliding roof * Platform length: 7.20 m x 2.50 m x 3.20 m * Loading height: 0.80 m * Platform front loading height: 1.60 m * Length: 3.30 m x 2.50 m x 2.35 m * Wooden loading floor with DIN lashing rings * Aluminium portal doors * BPW Eco Plus axles * Air suspension + raising/lowering * 2 x extendable storage boxes * ABS/EBS * GVW: 26,700 kg * Unladen weight: 5,780 kg * Payload: 20,920 kg * Kingpin to front dimension: 1.45 m * Diagonal kingpin to front: 1.75 m * Kingpin to rear dimension: 9.35 m If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to ensure there are no misunderstandings regarding their condition and suitability. Viewings and inspections are possible anytime upon appointment and are expressly desired. All information is provided without guarantee. We do not accept liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to alterations, prior sale, and errors.