Angel

ENGEL

Condition: ready for operation (used), Year of construction: 2004, operating hours: 70,029 h, functionality: fully functional, machine/vehicle number: 51561, clamping force: 2,300 kN, screw diameter: 135 mm, injection pressure: 1,600 bar, opening stroke: 3,800 mm, tool height: 1,890 mm, TECHNICAL DETAILS Clamping force: 2,300 kN Platen size (H x V): 2,900 x 2,500 mm Tie bar distance (H x V): 2,000 x 1,600 mm Minimum/maximum mould height: 700 mm/1,890 mm Maximum opening stroke: 3,800 mm Dodpfx Aoy T Hx Hsktekn INJECTION UNIT Screw diameter: 135 mm Shot volume: 8,870 cm³ Shot weight (PS): 8,071 g Injection pressure: 1,600 bar MACHINE DETAILS Net weight (with control cabinet): 113 t + 18 t Operating hours: 70,029 h

Condition: ready for operation (used), Year of construction: 2011, operating hours: 61,666 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 90 mm, column diameter: 175 mm, injection weight: 2,520 g, opening stroke: 1,400 mm, The machine is in excellent condition; all hydraulic hoses were replaced in the fourth quarter of 2024! TECHNICAL DETAILS Clamping force: 6,500 kN Column spacing (H x V): 1,100 x 960 mm Platen size (H x V): 1,510 x 1,440 mm Tool height (min./max.): 650 / 1,150 mm Opening stroke: 1,400 mm Maximum distance between platens: 2,050 mm Maximum tool weight: 11,000 kg Ejector force: 95 kN Ejector stroke: 250 mm Column diameter: 175 mm Injection unit (unit 5550) Screw diameter: 90 mm Maximum shot volume: 2,740 cm³ Maximum shot weight (PS): 2,520 g Injection pressure (max./increased): 2,180 bar Injection pressure (standard): 1,910 bar L/D ratio of the screw: 20 Screw stroke: 430 mm Maximum screw speed: 148 rpm Plasticizing volume: 77 g/s Nozzle closing force: 150 kN MACHINE DETAILS Control: CC200 Drive and Supply Installed drive power: 90 kW Cylinder heating power: 56 kW Number of heating zones: 6 Hydraulic tank capacity: 1,000 l Installed drive power: 90 kW Operating hours: 61,606 h EQUIPMENT Robot: Viper 40 Key features: 6 hydraulic circuits on the moving platen 2 hydraulic circuits on the fixed platen Dsdpfxjy T Hfyj Aktskn Cascade valves: 4 units (mounted on the fixed platen)

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Year: 2004 Serial No.: 52863 Dksdozcaxdspfx Aktjn Operating hours: 103,000 Screw: D40 CC200 A01 4-circuit water cooling 1x core pull 4x digital input, 4x digital output Few sockets ROBOT: TecnoMatic Micro 210/0184 Year: 2021 Load: 3 kg X-Y-Z – servo C – pneumatic

Condition: used, Year of construction: 2006, operating hours: 4,500 h, VICTORY 200/80 Power SN: 50294 Year: 2006 Closing force (kN): 800 S10 screw, diameter 30mm Operating hours: ONLY 4,500 Mounting plates enlarged vertically Mould heater with 12 control loops Dksdpfx Aozcanroktsn HV 2 version with control pumps (pressure and flow control in a closed control loop) for parallel movement sequence Microcomputer CC100 A03 Ethernet interface for use with EMS 8x digital output, 8x digital input Interface for ejector protection Interface for temperature control units, Data protocol: Engel, physical type: 20MA-CL Microflow MINI-CAM: Process parameter adjustment support based on an expert system 2-pole service socket, 230V 6x 3-phase socket, 10A / 16A 2x 3-phase socket, 10A / 16A, switchable 2/2-way magnetic air valve, R1/4 inch Flow regulator 0-10 l, 4 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) - Switch-off function selectable. Tubing for flow controller, 4 temperature control circuits

Condition: used, Year of construction: 2003, operating hours: 6,500 h, VICTORY 200/60 Power SN 162699 Closing force (kN) 600 (expandable to 800 kN) Year of manufacture: 2003 Screw diameter 30.00 mm, L/D ratio of the mixing cylinder 20.50 Operating hours: ONLY 6,500 Dksdpfxozcanfj Aktjn Vertically enlarged clamping plates (B-plates) Swiveling reject chute for reject selection, activated upon reject detection Version variant HV 2 with control pumps (pressure and flow control in a closed-loop control system) for parallel movement sequence Microcomputer CC100 A03 Kistler 5155 A2213Q02 charge amplifier with automatic switching pressure detection 4x digital output, 4x digital input Interface for temperature control units or hot runner controllers Data protocol Engel, physical type 20 mA – CL Microflow MINI-CAM - Process parameter adjustment support based on an expert system 1x service socket, 2-pole, 230V 4x 3-phase socket, 10A / 16A 2x 3-phase socket, 10A / 16A, switchable 2/2-way solenoid air valve, R1/4 inch Flow regulator 0-10 l, 8 circuits Temperature control circuits can be switched off manually or automatically (centrally at the flow controller) – Switch-off function selectable.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available! Dedpfey Iwlaex Aktjkn

Condition: excellent (used), Year of construction: 2005, ENGEL VC1800/400 POWER injection molding machine Basic data Manufacturer: Engel Model: VC1800/400 Power Type: Tie-bar-less hydraulic injection molding machine Control: Engel EC100 Year of manufacture: 2005 Operating hours: 110,000 h Country of manufacture: Austria Clamping unit Parameter Value Clamping force 4000 kN (400 tons) Opening stroke 1008 mm Ejector stroke 250 mm Ejector force 96.2 kN Injection unit (current configuration) Screw Ø60 mm Parameter Value Screw diameter 60 mm Max. injection volume 764 cm³ Max. injection weight PS approx. 695 g Max. screw speed 226 rpm Dkjdozb Ivhjpfx Akton Injection rate 283 cm³/s Injection pressure 1963 bar Max. injection pressure 2361 bar Nozzle stroke 500 mm Nozzle clamping force 110 kN The data for the injection unit comes from the original machine data sheet. Drive Parameter Value Pump motor power 45 kW Mounting plates The machine belongs to the Engel Victory 400T series. Typical plate dimensions for this size are approximately: Parameter Value Fixed platen approx. 1200 × 1100 mm Moving platen approx. 1200 × 1100 mm Max. mold height approx. 300–800 mm Exact transport dimensions - 7.5 × 2.2 × 2.7 m / 20 t.

Condition: like new (used), Year of construction: 2021, clamping force: 6,500 kN, Equipment: documentation/manual, ENGEL DUO 3660/700 ecodrive (2021) M017 CLAMPING UNIT • Clamping force: 700 T • Coining: NO • Max mold weight: 11000 kg Dkedozb H Enepfx Aktjn • Max mold weight per plate: 7300 kg • Size between bars (WxH): 1100x960 mm • Min mold height: 450 mm • Max mold height: 950 mm • Max stroke open: 1850 mm • Centering ring FIX / MOVE: 160 / 200 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 16 (16 pin TC, 16 pin PW) • Water cooling circuits: 12+12 • Hydraulic circuits (cores): 2+2 • Hot runner sliders hydraulic (nozzles): 8 • Hot runner sliders pneumatic: 4 INJECTION UNIT • Screw diameter: 70 mm • Nozzle face + thread: R??+M36x2,0 • Injection unit type: 3660 • Screw stroke: 360 mm • Max injection capacity: 1385.44 cm³ • Max injection pressure: 2300 Bar • Max injection rate: 296 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: YES • Sockets 400V/16A: 6 • Sockets 400V/32A: 12 • Sockets 400V/63A: 0 • Robot type: Linear • Vacuum ports: 6 • Air pressure ports: 6 • User inputs / outputs: 16 / 16

Condition: used, Year of construction: 2014, Clamping force: 600 t Screw diameter: 60 mm Distance between tie bars V: 910 mm Distance between tie bars H: 1030 mm Shot volume: 710 cm3 Type: Horizontal Drive: Hydraulic Cores 2 + 2 Dkjdezb E Dpspfx Aktjn \+ Robot Viper 40

Condition: ready for operation (used), Year of construction: 1999, operating hours: 91,191 h, clamping force: 25,000 kN, screw diameter: 150 mm, controller manufacturer: ENGEL, This ENGEL ES 23050/2500 DUO Injection moulding machine was manufactured in the year 1999 and has 91191 production hours. It is equipped with an Engel control unit. The machine has a clamping force of 25000 kN, is in good condition and well maintained. Machine Benefits Qualitative Machine Benefits • The machine is in very good condition, with all the minor maintenances done by internal service and the most important ones done directly by engel. Technical Machine Benefits • Opening power: 1600 kn • Opening lenght: 3100 mm • Diameter of the columns: 360 mm • Dosing lenght: 720 mm • Max injected volume: 12725 cm2 Djdpfx Akozb Emqotokn • Rotational speed of the screw: 85 rpm • Specific injection pressure: 1410 bar • Heating potence: 120 kw • Heat zones: 7 Important note: The robot is not included in the price. Please inquire separately for the robot price as an extra option.