Injection molding machine

Engel V 330H/80V/130 COMBI m. Drehteller Robot

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Standard Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 150-250 mm Platen daylight fixed/variable min.-ma. : 375-475 mm Wight on movable mold half. max. : 110 kg Ejector force/stroke max. : 30/60 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Fpsdpfx Aaoumznto Njp Injection pressure: 2.000 bar Working hours: 3829 Machine is like new!

Condition: ready for operation (used), Used machine Injection molding machine Manufacturer Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, available immediately Viewing possible by appointment The machine is no longer powered / No cooling water connection The machine is stored properly Technical data: Clamping force (kN) 800 kN Clamping plate (mm) 610×610 Bar spacing (mm) Installation height (mm) 250 Plate spacing (mm) 750 Control MC4 Screen text German Injection unit screw diameter (mm) 45 Fodpsu Ti Srofx Aa Nopp Injection pressure (bar) 1878 Displacement (cm³) 275 Pump drive power (kW) 18.5 Heating power (kW) 13 Oil filling (l) 270 Dimensions (m) 4.3 x 1.4 x 2.1 Total weight 3.2 tons More photos on request.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, overall weight: 10,600 kg, Hello dear customers, Fpsdpjt A Ui Aefx Aa Nsp We once again have great cleanroom machines in our program. Here we are offering this Engel 2-component cleanroom machine from 2006. The machine is supplied together with a GEKU SR 500 ST. Additional accessories include a protective cage as well as a turntable. The machine has run just 33107 cycles in automatic mode. The machine comes from a renowned pharmaceutical producer, so the machine and its handling were subject to very strict maintenance management and it is in absolutely excellent condition for its age. Even damage to the paintwork is hardly present. I will gladly send you more data and an offer. Best regards Nick Schönfeld Maschinen - Handel . e u

Condition: excellent (used), Year of construction: 2014, operating hours: 29,497 h, functionality: fully functional, machine/vehicle number: 230239, clamping force: 2,000 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Here we offer the following well-maintained used injection moulding machine as specialist dealers in injection moulding equipment. Of course, we also purchase well-maintained injection moulding machines from model year 2010 and newer. We have been wholesalers of used injection moulding machines for over 25 years. Current Notice – Tax Information and Benefit Regarding Used Machines From 01.07.2025, used machines are eligible for a special tax depreciation of 30% per year. In addition to the lower acquisition cost compared to a new machine, you can also claim the same depreciation rates as for new equipment. Keyword: Growth Booster (§ 7 paragraph 2 EStG-E). Arburg 1500T 2000-400, Vertical Rotary Table Machine Machine no.: 230239 Full equipment details can be found in the downloadable documents – machine datasheet. Control system: Selogica Year of manufacture: 2014 Total machine cycles: only 1,317,480 Automatic operation hours: 29,497 h Clamping Unit: - Distance between tie bars: 700 mm Fpodpjuuf Iaefx Aa Njp - Clamping force: 200 t / 2000 kN - Mould installation height: 400 mm - Table diameter: 1500 mm - Rotary angle: 180° - Rotation time: min. 2.4 s - Maximum weight on rotary table: 1,050 kg - Ejector force: 45 kN / ejector stroke: 175 mm Injection Unit: - Screw diameter: 40 mm - Shot volume: 201 ccm - Shot weight: 184 g - Injection pressure: 2,000 bar Extras: - 2-station rotary table, 180° alternating forward/back, with servo-electric drive and hydraulic locking pin for precision centering of the rotary plate at end position; safety separation between clamping and loading areas; table height adjustable to mould base height; provisions for media duct installation and connections to mould bases - Rotary table diameter: 1500 mm - Max. clamping force: 2000 kN - Injection unit compliant with EUROMAP 400 - 40 mm screw diameter Special ergonomic rotary table model with the following features: - Corrosion protection treatment for rotary table (VE 574/90) - Two water circuits - Three hydraulic circuits for needle shut-off nozzles - Three core pulls - Per station: 1 core pull and 2 temperature control circuits - Six mould temperature control circuits - 12-zone mould heating circuits - 2x Kistler cavity pressure sensors - Start-up part temperature monitoring Weight: 11,200 kg Power: 22 kW motor – Heating power: 9.4 kW (5 zones) – Connected load: 100 A The machine is offered in fully function-tested condition, operationally ready including a start-up guarantee – tested prior to dismantling. Important information about our machines and company: - We sell only our own machines, purchased from active production, from our Hannover warehouse - All listed machines are inspected and tested prior to removal - We DO NOT sell insolvency stock and are NOT a broker acting on behalf of third parties - All machines offered come from successful companies where maintenance and care are standard - All machines offered can be inspected at our warehouse

Year of construction: 2002, condition: ready for operation (used), Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible. Fpodpfx Ajum U S Esa Njp

Condition: used, Year of construction: 2012, Manufacturer: Wittmann Fedpjvyhtmsfx Aa Nopp Type: 702 Year of manufacture: 2012

Condition: ready for operation (used), Year of construction: 2015, General Data Measurements width 1700 mm Measurements depth 3000 mm Fpjdjwttt Rjpfx Aa Nsp Machine weight 8200 kg Clamping Unit Clamping force 200 tons This Engel Insert Rotary 200V/100 was manufactured in 2015. It's a vertical injection moulding machine featuring dimensions of 3000x1700mm and a weight of 8200 kg. With immediate pickup availability, consider the opportunity to buy this Engel Insert Rotary 200V/100 vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Manufacturer Geiger Type Mini Classic 0.3 Fpsdjt T Dt Ejpfx Aa Nsp Year of construction 2003