Working platform semitrailer

FAYMONVILLE MAX Trailer MAX200 Sattelanhänger Megatrailer

You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website.

Excerpt from the equipment list. Complete equipment list available upon request.

Loading platform:
* Loading platform with hardwood flooring and rear slope of approx. 1,000 mm x 8°
* 2 pairs of lashing rings (LC 5,000 daN)
* 1 pair of lashing rings (LC 10,000 daN)
* 6 pairs of lashing rings, foldable outward (LC 5,000 daN)
* 2 pairs of lashing rings, foldable outward (LC 10,000 daN)
* Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN)

Kingpin:
* JOST kingpins (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)

Axles:
* BPW axles, air-suspended disc brakes (approx. 377 mm), lifting/lowering function (ET 120)
* Axle tool

Tires:
* Tires 435/50 R 19.5 - Manufacturer of our choice
* TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data.

Braking system:
* Wabco braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit

Steel structure:
* Steel structure made of high-strength fine-grained steels, steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)

Electrical system:
* Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the turn signal
* ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin, connection according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098

Painting:
* Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system.
* HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure the best corrosion protection.
* Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system.
* Rear section metallized and painted in RAL 9010 (Pure White).
* Paint finish tested in a salt spray test according to ISO 9227-NSS.
* Sealing of cavities with special wax.

Includes the following additional equipment:
* Yellow-red air couplings on the galvanized connection bar at the front.
* 4 wheel chocks with mounting brackets.
* 2-inch kingpin.
* Loading platform with strong hardwood flooring.
* 1 spare wheel holder under the loading platform, on the right side in the direction of travel.
* Galvanized folding supports under the slope of the loading platform.
* 9 pairs of stake pockets for stake planks, approx. 100 x 50 mm, in the outer frame of the loading platform.
* One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high.
Podpsyvnfaefx Ap Esgn
* A painted layer of sand on the central beam as an anti-slip protection.
* 1 INOX toolbox transversely under the loading platform, approx. 1,000 x 400 x 2,500 mm.
* 6 pairs of WADER container pockets in the loading platform, for 1x 20' container, 2x 20' container or 1x 40' container.
* 3 pairs of stake pocket rails mounted transversely in the loading platform, for stake planks approx. 100 x 50 mm.
* Storage for max. 9 pairs of stake planks approx. 100 x 50 mm, screwed onto the front wall on the inside.
* 2 INOX toolboxes under the loadin

The listing was translated automatically. Translation errors are possible.