Finishing Mangle

FEYEN KREFELD 222.54 / 5400

Year of construction: 2017, condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Hedpfx Aouanq Tochenr

Condition: new, Year of construction: 2022, functionality: fully functional, TAKAMAZ CNC Compact loader FC60 Lathe with automatic loader unloader quickest loading system in the world loading time new part 2,8 sec. loading cap. till 60 mm diameter. loading lenght max 50 mm max weight 1 kg per side loading feed 120 m min include part turning for loading Fanuc Control full warranty 2 year Lathe spec. Spindle motor 7,5/5,5 kw Hnodjm E I D Hopfx Achsr turning diameter max 180 mm turning lenght 240 mm bar cap. 35 mm collet chuck 173E till 40 mm diameter spindle nose A2-5 spindle speed 4500 rpm tool pos 8 stations tool shank 20x20 mm boring holder 25 mm diameter rapid speed X/Z 18/24 meter machine dimension 1,36 x 1,37 meter height 1,7 meter weight 2,7 ton total power 14 KVA Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), functionality: fully functional, 840mm x 3,500mm, swing over cross slide 530mm, spindle bore 82mm, 7,1-900 Rpm, 18,5Kw, steadys, 4-jaw plate, DRO. Hnedpsxqxvvefx Acher

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Hsdpfju Eki Sjx Achjnr Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Condition: used, machine/vehicle number: 007135, Max. panel width: 800 mm Max. panel length: 2500 mm Hedpfot Hmppox Achjnr Panel return for edgebander: Left

Condition: good (used), Code: 0749 Hnedpsh T Dzqsfx Achor Brand: TAGLIABUE - COSTA LEVIGATRICI Model: TT 3 1300 Automatic sanding machine for worktops, furniture, panels, tables Technical data: Working width mm 1300 Max working thickness mm 130 Min working thickness mm 1 Composition: 1° Transversal belt - Motor Hp 15 - Electronic speed variator with display 2° Transversal belt - Motor Hp 15 - Electronic speed variator with display Transversal sanding belt size mm 1350 x 150 Chevron belt size mm 5510 x 140 Belt blowers Belt feed speed mt/min 5/25 Fixed table and mobile head for on-line set-up Panel cleaning rotary blowers Vacuum table Belt cleaning brush Infeed roller conveyor Installed power Kw 32 Compressed air 7 Atm Suction inlets: n° 2 diameter mm 200 - n° 2 diameter mm 150 - n° 2 diameter mm 100 Overall dimensions mmm 4400 x 2500 x 1600 h Weight kg 5000

Year of construction: 2010, condition: good (used), USED CNC BIESSE BREMA EKO 902 INSERTING MACHINE TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Complete protection of the machining head and the work area on the machine. - Numerical control system with BIESSE Works software on Windows. - Vertical positioning of the panels, with 2 panel clamping jaws. Hjdpfxjhknbrs Achenr - Panel feed (in the direction of the X-axis, on the lower support with rubber wheels), movement (in the X-axis) of the panel/board clamping jaws. PANEL DIMENSIONS (WORKING DIMENSIONS): - Minimum length: 160 mm / Maximum length: 3200 mm - Minimum width: 35 mm / Maximum width: 900 mm - Minimum thickness: 8 mm / Maximum thickness: 80 mm WORKING GROUPS: - No. 1 Vertical spindle (electro-spindle) ER32 (4.5 kW) with inverter (up to 18000 RPM) - No. 1 Circular saw (for grooves) diameter 120 mm (X-axis fixed) - No. 13 Independent vertical spindles for drilling (6 on the X-axis + 7 on the Y-axis) - No. 8 Independent horizontal spindles for drilling (3+3 on the X-axis and 1+1 on the Y-axis) - No. 1 Head group for hinge drilling - Total installed power: 20 kW AUTOMATIC DOWEL INSERTING GROUP ON BOTH SIDES WITH A PRESSURE PUMP FOR APPLYING THE GLUE.

Condition: good (used), machine/vehicle number: 85382, UNIVERSAL MACHINING CENTER MAHO MH 800 C, series: 85382 X axis stroke 800 mm Y axis stroke 500 mm Z axis stroke 600 mm Work table dimensions: 900x625 mm Maximum weight allowed on the table: 600 kg Spindle rotation speed: from 20 to 5.000 rpm, 15 kW Tool taper: ISO 40 cone Tool shop with 30 positions MAHO numerical command Machine dimensions: 3,350mm x 2,520mm X 2,500mm; Car weight: 6,200 kg Good technical condition Price EURO 7.000 + VAT Hnjdpfx Aceldgf Hohor Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, mileage: 398,612 km, power: 375 kW (509.86 HP), first registration: 02/2021, fuel type: diesel, overall weight: 18,000 kg, color: white, gearing type: mechanical, Color White, Total permissible weight: 18000kg, INDUSTRIAL VEHICLES Mercedes Actros 1853 Road tractor COLOR: WHITE YEAR: 2021-02 KM: 398,612 WHEELBASE: 3,600 GVW: 18,000 DISPLACEMENT: 12,809 Euro 6FUEL: DIESEL Hnjdpjvw Elzsfx Achor

Condition: used, power: 309 kW (420.12 HP), fuel type: diesel, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, VEHICLE AVAILABLE FOR IMMEDIATE DELIVERY! CONFIDENTIAL NEGOTIATION Offer valid for contracts and registrations until 30/04/2026, subject to approval. Hnsdpew Ey Sdsfx Acher - We accept trade-ins of any vehicle, subject to evaluation. - Financing or leasing options available for any amount based on customer needs. We are EXPERTS in remote negotiations, providing you with the best solution to purchase our vehicles even if you live far from the Province of Bergamo. Please verify the specifications of the advertised vehicle. Lodotruck S.r.l. declines all responsibility for any unintentional discrepancies compared to the description in the advertisement. If you are interested in the vehicle, please include your city and telephone number in your reply. If proposing a trade-in, specify: make, model, color, month and year of registration, mileage, main features, gearbox, kW/HP, and the condition of the vehicle (preferably with photos attached). With this information, we can respond to you more quickly. CUSTOMER SERVICE OPENING HOURS: Monday to Friday: 8:30 am – 12:30 pm / 2:00 pm – 6:30 pm Saturday: 8:30 am – 12:30 pm Contact us at