Cut-to-length and slitting line

Fimi cut-to-length line 1250×0.12-0.8mm x16t (A3793)

Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes.
Such machine can be good solution for metal coil processing companies.

Manufacturer : FIMI – Italy

Year of manufacture : 1982
Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI)
Ce marking : 2019
Material before processing :
Max coil width 1250 x 0.12 Г· 0.80 mm.
Uncoiler capacity : 16 Tons.
Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm.
Working speed 0-120 m/min.

LIST OF MACHINES COMPOSING THE LINE
➢ STOCKING RAMP FOR 2 COILS
➢ COIL LIFT ON UNCOILER
➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM.
➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER
➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES

– 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM.
– 1 BENCH FOR THICKNESS 0.50 ÷ 0.80

➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL
➢ PINCH-ROLL
➢ DESCENT ROLLWAY IN LOOPING PIT
Pgsdpettlfkofx Ap Een
➢ ASCENT ROLLWAY FROM LOOPING PIT
➢ PINCH-ROLL WITH MOTORIZED ROLLS
➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS
➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD
➢ ROTATING SHEAR
➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP
➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS
➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION
➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX.
➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY
➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING
➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE
➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING
➢ MAIN PULPIT FOR ALL LINE OPERATIONS
➢ OPERATION PULPIT LOCATED AT LINE EXIT
➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC
➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.