Open semitrailer with tarp

FLIEGL SDS 390 Gardine Mega Code XL/DC 9.5

Color: RAL 3002 Carmine Red
Front/rear panel: Purple / white

Extension ladder at the rear, door latch on the side
Support wedges with holder, aluminum side impact protection, galvanized steel underride protection, quarter panel fenders in front of the 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection,
Pallet stop on both sides, approximately 15-20 mm high, in a bolted design, loading height is reduced by approximately 15-20 mm, plastic toolbox
Axles + Suspension
SAF disc brake axles, "axle/chassis laser measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and starting assistance,
Activation via "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h)
Axle lift below the recommended ride height, therefore no warranty for tire damage
Hfjdpfxozun I As Aaisk
Braking system
2-line compressed air braking system, color-coded lines for easy servicing, spring brake parking brake, 2 fail-safe coupling heads in front, without connecting line, EBS, electronic braking system with EBS socket in front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve
Ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm (in Mega Flex only at low ride height or saddle height), vehicle - driving stability system
Wheels and tires
435/50 R19.5", manufacturer's choice, steel rims, factory silver
Electrical system
24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights in front
2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets in front
Floor
Sieve-printed panels approximately 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg
Front wall / corner posts
2,580 mm high, corner posts steel in volume design, release device for side tarpaulin on front wall, "Crash-Blocker," bottom inside at approximately 140 mm height with steel impact protection
Intermediate supports
3 pairs of sliding supports, fully adjustable in length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of support positions
Insertion slats
5 rows of wooden insertion slats
Rear wall / corner posts
Corner posts at the rear, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet
Rear portal doors, 2-wing with 2 internal rotary rod locks each
Tarpaulin
Tarpaulin, with welded-in horizontal and vertical straps
Tensioning closures made of stainless steel
Roof
Fliegl sliding roof, sliding cover, end lift at the rear that can be folded up, with a cover that can be slid from back to front,
L-shaped roof beam for the automotive industry, inner width between the roof beams approximately 2,490 mm, tarpaulin color: white, roof non-elastic, little deflection of the roof beam during loading and unloading, EcoLift - lifting roof can be raised by approximately 380 mm, on both sides, with gas spring support,
3 driving positions in the front: interior height in the front approximately 2900mm/ 2950 mm / 3000 mm
Optimal rain strip at the rear, on top of the end rail, above the doors
Fliegl manufacturer certificate for body strength according to EN 12642 XL, Fliegl manufacturer certificate for body strength accor

The listing was translated automatically. Translation errors are possible.