Lowbed

Fliegl Tandem-Tiefbett-Anhänger TTS 100 4,5m

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21001014667, empty load weight: 2,200 kg, maximum load weight: 8,300 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 6,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, Chassis: Center-axle semi-trailer, low-bed Fine-grain steel welded construction Telescopic support leg at the front Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels Side impact protection, aluminum Coupling device for center-axle semi-trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axles/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever system) Wheels and Tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle 24 Volt ABS and ALB, with ABS plug at the front, with connecting cable Caution: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable Platform TTS Low-lying steel platform, platform floor made of steel/checkered plate, steel walls solidly welded to the floor Platform length 4500 mm Platform front and sides with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 12 pieces on each side) Note: Slight unevenness of the platform possible due to welding distortion! 2 pairs of lashing eyes, 1 x at the front in the corners of the steel platform and 1 x at the rear in the floor, 5 tons each Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable Hodpfx Aszcnzajnpep with handrail on the ramps covered with wood (tip area with steel/checkered plate) with gas spring for single-person operation Operating Instructions The stated total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling characteristics possible due to incorrect load distribution) Country of Approval / Signage Country of Approval: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame: Hot-dip galvanized, including passivation "15 years warranty against rust" Note: Unevenness of the floor possible due to hot-dip galvanizing! Ramps: Hot-dip galvanized Caution: The images are archive images!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001012243, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, Please note that the images are archive images! The vehicle may be in use. Additional information: Chassis: Central axle semi-trailer, low-bed Fine-grained steel welded construction, geared support leg at the front, telescoping rear support, chocks with holder, mudguards made of sheet steel over both wheels Coupling device: Central axle semi-trailer Drawbar with tested 40 mm drawbar eye, drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearings and S-cam brakes, axle/chassis laser-aligned, reducing tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Braking system 2-line compressed air braking system, spring-loaded parking brake, 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin connector at the front, with connecting cable Platform TTS low-lying steel trough, platform floor made of steel/checkered plate, steel walls welded solidly to the floor, platform length 5500 mm, trough with Load-Lock profile at the front and on the sides for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight unevenness in the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel trough and 1 x at the rear in the floor, each 5 tons. Additional pair of lashing eyes in the floor, each 5 tons Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable, with handrail on the ramps, covered with wood, with gas spring for single-person operation Operating instructions The stated total weight is technically possible; depending on the load, the total weight may not be reached while adhering to the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Hsdpfxeqmc Rao Anpep Registration country/signs Registration country: Germany, with Dekra approval and certificate (according to §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Please note that the images are archive images! The vehicle may be in use.