Wira Grafik GmbH

Condition: excellent (used), Year of construction: 2009, Format (cm): 78 Equipment / Additional information: Rodsynkx Sjpfx Afcsp Side tables, safety barrier, air table, 1x reserve knife

Condition: good (used), Year of construction: 2016, Year of manufacture: 2016 (according to manufacturer's specification) Counter reading (sheet feeder): approx. 3.3 million. - 5 components - Barcode control - Ionization Special equipment: 9 laser sensors for processing Scodix material Technical data (information without guarantee) - Max. feed format: 762 x 530 mm - Min. trimmed finished format: 100 x 105 mm - Feeder stack capacity: 800 mm - Max. delivery stack capacity: 254 mm Rsdpfx Afoynf Tkjcjp

Condition: good (used), Polar Mohr 78 ED Paper Guillotine Very low mileage, very good condition. The machine was purchased from a school workshop and has not been used in production. Technical specifications: Cutting width: 780mm Stack height: 120mm Color LCD display Power supply: 400V Weight: 1400kg Enlarged side tables Chrome table surface Rjdpfx Afeynfwiocsp Table backlight and optical cutting line Flexibly adjustable clamping force Spare knife, cutting sticks, tapping block, and operating tools.

Condition: used, Year of construction: 2018, functionality: fully functional, Horizon HT-30C (Used) Year: 2018 Rsdjym E Ewspfx Afcop Specifications Untrimmed Book Size: Max. 320 × 235 mm / Min. 204 × 136 mm Finished Book Size: Max. 305 × 230 mm / Min. 200 × 134 mm Trim Width: Max. 99.9 mm / Min. 2.0 mm Trim Height: Max. 51 mm Book Stack Height: Max. 300 mm Production Speed: Up to 440 books/hour (25 mm thick, 2 books stacked) Up to 500 books/hour (10 mm thick, 5 books stacked) Voltage / Frequency: 3-phase 200V / 50–60 Hz

Condition: used, Year of construction: 1998, machine/vehicle number: M-115H- 007-02/15-08, cutting width (max.): 1,150 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, Equipment: safety light barrier, We offer this used Schneider Senator Schneider Senator 115H - TSC paper cutting machine - Guillotine, year of manufacture 1998. Manufacturer: Schneider Senator Model: Schneider Senator 115H - TSC Year of manufacture: 1998 Rsdpfeymy I Hox Afcop Condition: used Machine type: paper cutting machine - Guillotine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Cutting length 610 mm 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz Rjdpsymxp Asfx Afcep 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.

Condition: good (used), Perfecta 132 TS Paper Cutting Guillotine The machine is in very good condition and ready for production. Manufactured in 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Perfecta premium cutting machines are manufactured in Bautzen, Germany. Redpoymxm Isfx Afcep Perfecta Machine Features: – Interactive User Interface – 18.4” Touchscreen – USB Interface – CIP Data Module – Positioning via Electronic Handwheel – Programmable Holding Pressure – Automated Knife Change from the Front – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1320 mm Maximum Stack Height: 165 mm Infeed Depth: 1325 mm Minimum Cutting Capacity with Sheet Metal Under the Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under the Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Knife Capacity: 44 Cycles/Min Saddle Guidance: Over the Work Table Power Main motor: 4.5 kW Net weight: 3410 kg The machine includes a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Perfecta 76 UC Paper Cutting Guillotine This machine is in very good condition. It has been in one hand since new. Technical specifications: Cutting width: 760mm Stack height: 110mm Weight: 1650kg Power supply: 400V Equipment: – LCD programmer Rsdpjymxmzjfx Afcep – photocells – air table – cutting line – hydraulic clamp with variable force adjustment – manual – tool kit – clamp plate – spare blade

Condition: good (used), Neolt Electro Power Plus 145 Trimmer The device is fully functional and ready to use. Description: Ideal for trimming drawings, photos, posters, etc. Rotary hardened steel blade Transparent plastic pressure plate for precise cutting Sturdy base for creating a professional workstation Cutting length: 145 cm Redpfoymxmuex Afcjp

Condition: good (used), Perfecta 92 TS ASE Paper Cutting Machine The machine is in very good condition, manufactured in 2011. This machine features a waste removal system. A unique machine on the market. Owned by the same company since new. Under a service contract until the very end. Technical Specifications: Cutting Width: 920 mm Stack Height: 120 mm Weight: 2000 kg Power Supply: 400V Equipment: – ASE Automatic Waste Removal System with conveyor belt (automatically divided work table) – Programmer with 19” touchscreen monitor – CIP-3 and CIP-4 operation, cutting visualization on the monitor – Memory expansion via USB, network connectivity – Photocells Rodoymxmnspfx Afcep – Air table – Cutting line – Chrome-plated table surface – Enlarged side tables – Servo-driven rear saddle control – super-fast operation, always stops at „0” – Hydraulic clamp with smooth force adjustment – User’s manual – Tool set – Press plate – Tapping block – Spare knife

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Photocells Rsdpsymxmbsfx Afcjp Intuitive operation Documentation, tools, spare blade, and a safety blade change tool.

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Rsdpfx Afeymxl Rocop Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Side tables Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers. Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Robust 800 Roll-to-Sheet Slitter Machine in very good condition, ready for production. Slitting and cross-cutting machine, roll-fed. Sheeter Ideal for bookbinding veneer, paper, canvas, eco-leather, PVC, plastics, self-adhesive foil, etc. Easy format setting, computer control. Manual and automatic operation. Technical specifications: Total power: 3.5 kW Working width: 800 mm Maximum roll diameter: 600 mm Maximum roll weight: 250 kg Feeding/cutting length controlled by computer Working speed adjustable via inverter Approximate dimensions (L x W x H): 1970 x 1310 x 1400 mm Weight: approx. 1100 kg Includes a sheet outfeed table. Rodpfx Afsymxl Decop

Condition: good (used), IDEAL EBA 5560 Hydraulic Guillotine A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple to operate, yet with the performance of a large industrial machine. The machine was used in an office and is the latest product from the German manufacturer Ideal. Control: 99 programs, each with 99 steps Data entry via LCD touchscreen Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Switching mm/inch Hydraulic knife and pressure beam drive Photocells Rodpfsymxlkox Afcsp Side tables Cutting line Technical data: Cutting length: 550 mm Infeed height: 95/92 mm – with under-beam bar Infeed depth: 570 mm Front table depth: 460 mm Minimum final cut: 32/60 mm – with under-beam bar Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 369 kg Dimensions: 1520 x 1400 x 1370 mm

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. This is the newest model, currently in production. In one hands from new. Under a service contract until the very end. Year of production 2011. Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Rodoymmzyspfx Afcop Equipment: – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: used, Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: G300L321302, cutting length (max.): 3,200 mm, type of input current: three-phase, input current: 32 A, input voltage: 208 V, table width: 1,800 mm, table length: 3,200 mm, input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used Zünd L-3200 machine, type: paper cutting machine, year of manufacture: 2022. Rodpfxsymdb Dj Afcjp Product: Cutter G3 Type: L-3200 Year of manufacture: 2022 Serial number: G300L321302 Country of manufacture: Switzerland Voltage: 208/400 V AC, 3-phase Current: 32 A Frequency: 50–60 Hz If you have any questions or require further information, please send us a message or contact us by phone. Full specification available upon request. The unit is practically as new (1000 operating hours).

Condition: used, Year of construction: 2010, functionality: fully functional, Used Kongsberg plotter from 2010 Work area: 1680 x 2190 mm Used in packaging development for sample creation. Redpsymb Alsfx Afcop Handles E-flute up to BC-flute Regularly maintained Last inspection by Kongsberg 02/25 – all in order Viewing and test jobs possible at any time.

Condition: excellent (used), Year of construction: 2008, Offer consisting of: Wohlenberg 115, year of manufacture 2008, incl. spare knife. Redoymbydjpfx Afcop

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 935 590, STC-Ref:G-291-0023 IDEAL 5221-A, Year: 05/1989 format: 0 x 520 mm equipped: - cutting width 520 mm - cutting hight 80 mm - cutting depth: max. 520 mm Rsdsyl Iz Ejpfx Afcop - electromechanical knife drive - automatic pressing - spindle-guided backstop - Electric carriage forward and reverse movement - digital measurement display - 1 spare knive --> available: 03/2026

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Digicon series 2 2010 model specifications: Redpsyl Alfefx Afcop • Web Width: 330 mm • Flexo Varnishing Unit: 1 unit • Rotary Die-Cutting Unit: Equipped with a K&B GapMaster system • Maximum Unwind Roll Diameter: 700 mm • Running Speed: Up to 36 meters per minute at a 300 mm repeat length • Plate Cylinder Flexo Sizes: • Minimum: 10 inches (254 mm) • Maximum: 24 inches (609 mm) • Maximum Rewind Diameter (Single Spindle): 600 - Rotary and flat blade spitting

Condition: used, Year of construction: 2009, functionality: fully functional, cutting width (max.): 520 mm, insertion depth: 520 mm, insertion height: 80 mm, overall weight: 325 kg, type of input current: AC, Equipment: safety light barrier, Stack cutter with hydraulic clamp – ideal for digital printers. 520 mm cutting length – electro-mechanical blade drive – hydraulic drive for the pressure bar – infinitely adjustable clamping pressure with manometer display – foot pedal for pre-clamping or as a cut indicator – clamp bar cover – electrically operated back gauge with fully programmable "EP" control – electronic handwheel with stepless speed adjustment for fine manual back gauge positioning – optical cutting line indicator with high-intensity LEDs – pressure bar guided on both sides for even pressure – precision back gauge spindle – adjustable back gauge rack with fine pitch and plastic gliders – two side lays each on front and rear tables – solid steel knife carrier and adjustable knife guides – high-quality blade made from "Solingen knife steel" – comprehensive "SCS" safety package. Cutting length: 520 mm Cutting height: 80 mm Residual cut: 22 mm Table depth: 520 mm Rsdeylwywepfx Afcsp Power supply: 230 V / 50 Hz Motor power (rated input): Blade drive: 1.1 kW Clamp drive: 0.32 kW Back gauge drive: 0.1 kW Motor protection switch as standard Dimensions: H 1260 mm, W 855 mm, D 1085 mm

Condition: used, Year of construction: 2009, Year: 2009 Condition: good Technical parameters: - maximum working arch format 320 x 650 mm - minimum working arch format 210 x 210 mm - paper grammage range 110 to 300 g/m2 - minimum product size 48 x 85 mm (business card) - tolerance of longitudinal cut ± 0.3 mm - tolerance of transverse cut ± 0.3 mm - width of side trim 3.2 – 55 mm from paper edge - transverse cuts / arch 15 - dies / arch 10 (3 depth levels of die) - loader capacity 100 mm - unloader capacity 100 mm - number of programs 80 - machine power supply 230 V; 0.7 A; 100 W - machine weight 132 kg - dimensions - 1600 x 621 x 1054 mm Rsdpfjyllhpjx Afcsp

Condition: used, Year of construction: 2001, Three knife trimmer Müller Martini Merit S Year: 2001 Rodpsylblkofx Afcep Hour counter: 30400 Description: - Digital display - Infeed conveyor from the left - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 103 mm Maximum size (cutted): 434 x 310 x 80 mm Minimum size (cutted): 136 x 100 x 2 mm Max. mechanical speed: 1.000 - 4.000 cycles / hour Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included Rodpfx Aoyk Ip Tefcjp ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: excellent (used), Year of construction: 2000, Wohlenberg 155 – Industrial Paper Guillotine (155 cm) Redoyk Dufopfx Afcop For sale: Professional Wohlenberg 155 paper guillotine, designed for high-performance bookbinding and print production applications. This machine offers a cutting width of 1550 mm and is equipped with an air table, which significantly facilitates sheet handling and increases operator comfort. The guillotine is fitted with a rear gauge (backgauge) with a maximum retraction of 1600 mm, allowing for processing of large paper formats. Additionally, the unit is equipped with a safety barrier system, ensuring a high level of safety in compliance with industrial standards. The control system allows for the input and storage of cutting programs, which speeds up the execution of repetitive jobs and enhances production precision. Included in the set is a Baumann jogger, providing an ideal addition to any paper finishing line. Key parameters: - Cutting width: 155 cm - Air table - Backgauge retraction: 1600 mm - Safety barriers - Programmable cutting sequences - Baumann jogger included