Dry Iced - Mobile Trockeneisreinigung

Condition: excellent (used), Year of construction: 2019, operating hours: 2,092 h, functionality: fully functional, machine/vehicle number: IT J320209, overall weight: 447 kg, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in excellent condition! The electronics have been completely replaced! Only 2029 operating hours. For sale due to downsizing of the machine park! Gedjz Ah Uxepfx Adteug

Condition: used, Year of construction: 2017, operating hours: 20,300 h, functionality: fully functional, overall weight: 350 kg, total length: 1,110 mm, total width: 800 mm, total height: 1,110 mm, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 2,970 m³/h, operating pressure: 10 bar, noise level: 65 dB, protection type (IP code): IP55, ALUP Allegro 15 – 15 kW variable speed screw compressor For sale: ALUP Allegro 15 industrial screw compressor with variable speed control. Thanks to the variable speed control, the compressor automatically adjusts its speed to the current compressed air demand. This makes it an energy-efficient solution, especially for fluctuating compressed air consumption. Specifications: Manufacturer: ALUP Type: Allegro 15 Power: 15 kW Type: Screw compressor Control: Variable speed / variable speed Control system: ALUP air control 4 Condition: In good working order Guodpfxsz Ahkmj Adteg Professional industrial design Asking price: €4,250.00 (excluding VAT).

Condition: used, Year of construction: 1999, Operating pressure: 350bar, max. final temperature: 120°C, compressed air receiver capacity: 17l, operating pressure of compressed air receiver: 11bar, operating hours: 30,857h, an on-site inspection is possible. Gusdpfx Ajz Agg Tsdtog

Condition: good (used), Year of construction: 2010, This is your *KAESER SK 25 compressor + 500L tank + TBH 23 dryer*. - *KAESER SK 25 - SIGMA screw compressor* - *Part No. 101958.0 / Serial 1562* - *Hour meter:* - Photo 1: *20,704 total hours* - This is low for a KAESER; they typically run for 60,000 hours. - Photo 2: *5,224 hours under load* (1) - This represents the core operating time of the machine. - Photo 3: *314 hours* - Hours under pressure (2). - *Displayed pressure 0.0 bar = normal shutdown, no fault.* - *Complete set:* - SK25 compressor (15 kW - approximately 2 m³/min at 8 bar) - Vertical tank X. PAUCHARD 500L galvanized (with pressure gauge) Guodez Ab A Ajpfx Adtog - KAESER TBH 23 KRYOSEC refrigeration dryer.

Condition: used, Year of construction: 2005, operating hours: 39,119 h, functionality: unexamined, Equipment: refrigerant dryer, KAESER AIRTOWER 6 with Aquamat 2 Oil-Water Separator Under the name Kaeser Airtower 6 (often based on the SX 6 compressor stage), Kaeser offers a compact, ready-to-connect compressed air station that consists of a screw compressor and an integrated refrigeration dryer. Performance Data & Function Motor Power: 4.0 kW Flow rate (Delivery rate): At 8 bar operating pressure: approx. 0.49 m³/min (490 l/min) At 11 bar operating pressure: approx. 0.37 m³/min (370 l/min) Integrated refrigerated dryer function: Provides dry compressed air directly from the station (dew point +3 °C) Gedsz Abp Aspfx Adtjug Control: Equipped with the electronic monitoring system, Sigma Control. The KAESER AQUAMAT 2 is a classic oil-water separator for legally compliant treatment of compressed air condensate from compressor systems.

Condition: used, Year of construction: 2022, operating hours: 15,000 h, functionality: fully functional, overall weight: 2,020 kg, power: 90 kW (122.37 HP), volume flow: 960 m³/h, operating pressure: 8 bar, pressure (max.): 8 bar, Equipment: documentation/manual, type plate available, We offer this used Hertz FRECON 90 P screw compressor, manufactured in 2022. Pressure: 8 bar Capacity: 16 m³/min Rated power: 90 kW Gedpfx Adoz Abb Eeteug Weight: 2020 kg Voltage: 400 V Frequency: 50 Hz Maximum shaft speed: 2340 min⁻¹ Date of manufacture: 04/2022 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Atlas Copco GA 118 Rotary screw compressor Gsdpfxezz Rm Uo Adteug

Condition: excellent (used), Year of construction: 2020, S017015 PROD. ATLAS COPCO TYPE GA45 S/N API588534 YEAR 2020 POWER (kW) 45 Guodpfx Ajzz Nndjdteg CAPACITY (m3/min) 8.3 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no CONNECTION 2' DOCUMENTS no

Condition: excellent (used), Year of construction: 2011, operating hours: 76,650 h, functionality: fully functional, power: 110 kW (149.56 HP), volume flow: 117.8 m³/h, pressure (max.): 10 bar, type of cooling: air, Screw compressor CompAir L110 110.00 kW 10 bar Gedpjzz Hdpsfx Adtoug 18.63 m3/min Year of manufacture: 2011 Operating hours: 76,650

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 9.7 m³/h, operating pressure: 8 bar, pressure (min.): 4.5 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Fully functional Atlas Copco screw compressor, model GA 55, in new condition. Gusdpfxozzq Ewe Adtjg

Condition: used, Year of construction: 2005, operating hours: 43,152 h, functionality: fully functional, machine/vehicle number: API570324, overall weight: 1,076 kg, total length: 1,700 mm, total width: 900 mm, total height: 1,600 mm, space requirement length: 2,700 mm, space requirement width: 1,900 mm, space requirement height: 2,100 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 406.8 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Complete industrial compressed-air package comprising an Atlas Copco GA37 VSD 37kW variable-speed rotary screw compressor together with a 2018 Hi-Line Tundra 300 refrigerated air dryer. The variable-speed drive automatically adjusts compressor output according to air demand, making this an efficient solution for industrial applications with varying compressed-air requirements. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. The system includes a HI-LINE TUNDRA 300 REFRIGERATED AIR DRYER - Model: Tundra 300 - Year: 2018 - Maximum working pressure: 16 bar - 230V single-phase - Power: 1.73kW - Refrigerant: R407C - Serial No: 18M-014875 - Original operating manual included The dryer has been installed alongside the Atlas Copco to provide a complete compressed-air solution. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Available for inspection by appointment. Gujdpfjzzpttox Adteg Location: Caerphilly, South Wales Buyer to arrange collection/disconnection and transport. Further photographs and operating information available on request.

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW 8.10 bar 26.04 m3/min Year of manufacture: 2010 Guedpfx Ajzznqkedtsg Operating hours: 64,380 h

Condition: like new (used), Year of construction: 2017, operating hours: 56 h, functionality: fully functional, total length: 1,976 mm, total width: 974 mm, total height: 1,500 mm, pressure (max.): 13 bar, noise level: 70 dB, nominal flow rate: 240 m³/h, The machine is in like-new condition with only 54 operating hours! Submitting a bid obligates the buyer to collect the machine on the following dates: Monday, October 5, 2026, Tuesday, October 6, 2026, Wednesday, October 7, 2026, Thursday, October 8, 2026, until 12:00 PM. The machine is already in storage. The technical data specified in the advertisement comes from a manufacturer's data sheet. The seller does not guarantee the accuracy of the data. TECHNICAL DETAILS Operating pressure max.: 13 bar Pressure setting range: 4–13 bar Volume flow: 22–66 l/s Volume flow: 1.3–4.0 m³/min Volume flow: 47–140 cfm Sound pressure level: 70 dB(A) MACHINE DETAILS Motor power: 22 kW Dimensions (L x W x H): 1,976 x 974 x 1,500 mm EQUIPMENT Elektronikon Graphic control system Oil-free, water-injected screw compressor Gujdpfjzzmw Nex Adtog ISO 8573-1 Class 0 VSD speed control Further technical data can be found in the attached data sheet.

Condition: good (used), Schneider Compressor 670-270 ST used, including refrigerant dryer Tank volume 270 liters Suction capacity 670 liters/min Delivery capacity approx. 515 liters/min Maximum pressure 10 bar Speed 1030 1/min Godezzclpspfx Adtoug Motor power 4.0 kW / 400V Dimensions: W x D x H 850 x 830 x 1800 mm Weight: approx. 160 kg

Condition: excellent (used), Year of construction: 2008, ATLAS COPCO GA90VSDFF screw compressor, equipped with a frequency converter and air dryer, recently serviced. Technical data: capacity: 17.070 m3/min; 90 kW motor; maximum pressure: 12.8 bar; operating hours: 13435 h; year: 2008. Price: 48,500 net Price: 59,655 gross Gusdpszzbyfjfx Adtsg The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support.

Condition: used, Year of construction: 2008, operating hours: 58,000 h, functionality: limited functionality, overall weight: 1,150 kg, power: 45 kW (61.18 HP), volume flow: 7.28 m³/h, pressure (min.): 4 bar, pressure (max.): 9.8 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Premium screw compressor Atlas Copco GA 45+ FF Volumetric flow rate: 121.4 l/s or 7.28 m³/min Gjdezzav Sspfx Adteug Max. operating pressure: 9.8 bar Product description according to the manufacturer: GA45+AFF-10 APB 400 50 RIF Product number: 8152553718 Date of manufacture: 23/05/2008 Model: GA45PLUS_1 Product description: GA 45+ Current operating hours: approx. 57,000 hours Last major service with oil and filter replacement and overhaul of all valves and condensate drains in March 2026 at 56,800 operating hours. The compressor is functioning. The integrated refrigerant dryer does not reach the pressure dew point of 3°C (operates at 10°C). The source of the fault has not been investigated; therefore, no further information can be provided regarding the cause and repair requirements. For continued operation, it is recommended to repair the internal dryer or use an external dryer. Used equipment, sold as is, without warranty. More pictures will follow. For the photo, the doors were removed, but they are still available.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, We offer for sale a screw compressor with an integrated condensation dryer, type Aircraft / Fini A-K-Max 7.5-10-270 K (IE3), manufactured in 2021 by Aircraft. It is manufactured and marked according to CE standards (European conformity). The compressor has been used sparingly and regularly serviced, with documented operating history, including Czech operating and maintenance manuals. Technical parameters: Capacity: 1050 l/min, Maximum pressure: 10 bar, Tank size: 270 l, Dimensions: L: 1200, W: 680, H: 1540 mm, Weight: 280 kg, Electric motor power: 7.5 kW, Voltage: 400 V, Sound pressure level Lp 62 dB. The compressor is in very good technical condition and is ready for immediate use. It can be viewed at our warehouse in Přerov. Gujdozy Spzjpfx Adtog

Condition: used, Year of construction: 2016, operating hours: 5,235 h, machine/vehicle number: CAI949587, power: 22 kW (29.91 HP), Power output: 22 kW Gsdpfx Adozy Hy Ujtsug Operating hours: 5235

Condition: excellent (used), Year of construction: 2014, Total power: 55 kW Power supply: 400 V / 50 Hz Maximum operating pressure: 8 bar Motor speed: 3,500 rpm Weight: 1,300 kg. Gsdpfx Aszy Hrkedtoug

Condition: excellent (used), Year of construction: 2012, operating hours: 74,233 h, functionality: fully functional, power: 75 kW (101.97 HP), volume flow: 720 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: refrigerant dryer, Kaeser CSD125TSFC screw compressor Inverter and dryer integrated Gusdpszya Tuofx Adtjg 75 kW 8.50 bar 12 m3/min Year of manufacture: 2012 Operating hours: 74,233

Condition: new, performance: 984 l/min main engine power: 7.5 kW tank capacity: 500 l maximum operating pressure: 10.0 atm integrated refrigerant dryer electronic adjustment of compressor operating parameters soundproofed cabin (only 67 dB) complies with CE standards manufactured in 2025, NEW Godpfx Aozx Sr Hodteug

Condition: excellent (used), Year of construction: 2013, overall weight: 403 kg, volume flow: 2.2 m³/h, operating pressure: 10 bar, pressure (min.): 10 bar, input voltage: 400 V, ATLAS COPCO GA 15 screw compressor Atlas Copco screw element 15 kW motor Capacity: 2.20 m3/min Pressure: 10 bar Year of manufacture: 2018 Operating hours: 10412 hours Compressor in fully working condition. Gsdpfezxzvnex Adtoug

Condition: new, Year of construction: 2026, CORMAK 10 bar Diesel Compressor is a modern, fully independent source of compressed air, designed for professionals who require maximum performance and mobility in the field – wherever access to a fixed electrical power supply is unavailable. The unit combines advanced engineering, European manufacturing precision, and innovative design solutions to ensure reliable operation even under the most demanding working conditions. KEY ADVANTAGES AND FEATURES 10 bar operating pressure: Optimal pressure parameters ensure a stable supply for a wide range of pneumatic tools, construction machinery, sandblasting equipment, and drilling machines. Full mobility on its own wheels: A robust running gear mounted on heavy-duty wheels allows for easy transportation and effortless movement of the compressor directly to the work site. Third jockey wheel on the drawbar: The additional swivelling wheel mounted on the drawbar significantly facilitates precise positioning and manoeuvring of the compressor on construction sites or in confined working areas. Four independent levelling jacks: Allow the machine to be perfectly levelled, even on uneven or difficult construction terrain. Opening housing panels with gas-oil struts: Provide quick and wide access to all service components, ensuring convenient maintenance and periodic inspections. Built-in brake: Enhances safety during transportation and when the unit is parked on slopes. TECHNOLOGY AND PERFORMANCE CORMAK diesel compressors are designed using high-quality components, resulting in a long service life and low operating costs: High-performance screw air end: The heart of the compressor ensures high effective output, continuous operation, and resistance to intensive use in industrial environments. Gujdpfx Adjzxzchotsg Sound-insulated and durable enclosure: The robust construction with sound-insulating panels effectively reduces noise levels, improving operator comfort and minimising the impact on the surrounding environment. Advanced cooling system: A specially designed cooler combined with an efficient cooling system ensures optimal thermal conditions, even when operating under heavy loads and at high ambient temperatures. Intuitive control system: The electronic control panel enables full monitoring of key operating parameters, such as pressure and temperature, while facilitating diagnostics and maintenance planning. APPLICATIONS Construction and road construction: Powering pneumatic breakers, drills, wellpoint systems, and machines for plastering and spray painting. Service and field work: An indispensable source of compressed air wherever a 400 V mains power supply is unavailable. Heavy industry and installation work: Rapid support for production and installation processes in the field. TECHNICAL SPECIFICATIONS Parameter Specification Power 42.4 kW Air delivery 5,100 l/min Operating pressure 10 bar Drive transmission Direct drive Compressor cooling system Air/oil Oil capacity 45 L Air outlet valves 3 pcs. Battery 12 V DC – 790 A – 115 Ah Fuel tank capacity 44 L DIESEL ENGINE Parameter Specification System 4-stroke Displacement 2,615 cc Number of cylinders 4 Rated power at 2,000 rpm 42.4 kW Cooling system Air Lubrication system Oil Lubrication system capacity 10.2 L

Condition: excellent (used), Year of construction: 2002, operating hours: 111,219 h, functionality: fully functional, power: 180 kW (244.73 HP), volume flow: 1,734 m³/h, pressure (max.): 12.5 bar, type of cooling: air, Screw compressor, Atlas Copco GA180VSD Guedpfjzxxvxex Adtsg Inverter integrated 180 kW 12.50 bar 28.90 m3/min Year of manufacture: 2002 Operating hours: 111,219

Condition: excellent (used), Year of construction: 2016, operating hours: 3,611 h, PROD. ATLAS COPCO TYPE GA90 S/N API624230 YEAR 2016 Guodpfx Aszxxnbsdtog POWER (kW) 90 CAPACITY (m3/min) 16.48 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 3611 VARIABLE FREQUENCY DRIVE no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 1/2 NEW/USED USED