Doreco

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, cutting height (max.): 110 mm, workpiece length (max.): 2,200 mm, workpiece width (max.): 4,300 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 4,300 mm Maximum panel length: 2,200 mm Bedpfxjyqydcs Ah Ijld Maximum cutting height: 110 mm Maximum feed rate: 100 m/min Main saw blade protrusion: 120 mm Number of grippers: 9 Saw Unit Motor power (saw unit): 18 kW Motor power (scoring unit): 2.2 kW Maximum feed speed: 150 m/min MACHINE DETAILS Control system: Windows XP Machine programming software: OSI FEATURES Quick saw blade change Second flexible pusher Panel rotation station Loading of thin sheets CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is, and as inspected”) on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination address. External reference: 8158

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Cutting length: 4,300 mm Program pusher travel: 4,400 mm Saw blade projection: 90 mm Bljdpfx Aheypi Dio Ied Main saw motor power: 11 kW Scoring saw motor power: 2.2 kW * Automatic main saw cutting height adjustment according to panel stack height * Controlled opening of the pressure beam * Quick-change system for main and scoring saw blades (QUICK CHANGE) * Grooving device with main saw - electronic adjustment * "DIGISET" - electronic adjustment of the scorer to the main saw from the operator panel * Side alignment unit integrated into the saw carriage * Cycle start button located next to the third air flotation table * Automatic measuring of workpieces for cutting sequences and manual cuts Equipment: ----- 4 air flotation tables with rounded front edges 9 grippers 11 roller supports in the program pusher area Electrical requirements: 400 V, 50 Hz, 3 phase Control: WINDOWS PC with OSI PLUS software * OS Labelling - label printing software * OPTIPLANNING optimization software for office workstation Additional accessories: * Label printer on the machine

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Max. panel width: 4500 mm Max. panel length: 4500 mm Main saw blade Ø 320 mm Scoring blade Ø 200 mm (conical tooth) OSI control system Label printer Label printer holder on the console Cycle start button via remote control Bsdpjypbidefx Ah Ijld Available July 2026

Condition: like new (used), Year of construction: 2020, machine/vehicle number: 0-240-75-0703, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, NEW PRICE ONLY 79,900 EURO!!! Price valid only until March 21, 2026! Don’t miss this opportunity! A brief history: HOLZMA has been part of the HOMAG Group since 1987. In March 2017, HOLZMA Plattenaufteiltechnik GmbH was renamed HOMAG Plattenaufteiltechnik GmbH, creating a unified identity within the group in line with the motto ‘one company, one brand’. Within the HOMAG Group, HOLZMA stands for precision in panel cutting. The brand’s panel saws (SAWTEQ series, formerly HPL series) are renowned for their reliability and form the backbone of furniture production, combining high performance with modern automation. We invite you to purchase a NEW, top-quality panel saw: HOMAG SAW-TEC B-400 Pro Line, extended version with automatic storage handling capability. The saw offered is BRAND NEW. It was purchased from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly to our site by the manufacturer. The Homag service team only completed the machine’s initial setup; it has not been used since. In this industry, neither the model nor the Homag brand needs an introduction, as Homag is regarded as a global leader in the production of modern, high-quality machinery. Our model is exceptionally well-equipped, featuring nearly every option. A similar saw in the basic version costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended version, compatible with automatic storage and additional equipment, is priced at around 190,000 EURO net (807,500 PLN net)*. Advantages: - High throughput due to automatic loading and extended saw blade projection - High efficiency with relatively small footprint - Designed for effective material flow and precise logistics - Adapted for integrated production processes We have direct contact and support from the manufacturer HOMAG, should installation and commissioning be required at the new owner’s site. In our opinion, the discount we offer—over 45% off the price of an equivalent new saw—represents an outstanding value for anyone currently searching for a state-of-the-art saw compatible with automated storage systems, or for a customer who may consider such integration in the future. This translates into savings of around 90,000 EURO net, or approximately 400,000 PLN net*. Of course, the saw can also be operated independently, without connection to an automatic storage system. General remarks regarding the sale: - The machine is BRAND NEW but manufactured in 2020, therefore no warranty or guarantee is provided. Bodpfsyn R A Rex Ah Ield - No returns accepted. - The price listed does not include VAT (23% for Polish buyers) which will be added to the invoice. Please verify how the price is presented in the offer. - Single owner. * 1 EUR = 4.25 PLN. We welcome all users. We own several properties in Poland and are a developer constructing houses and apartments in Warsaw (the capital of Poland). The machines offered are our property, acquired as settlements from tenants in the furniture industry. We know their history and condition, which matches our descriptions. We maintain contacts with the manufacturers—Homag, Otto Martin, OMC Machinery, and FANUM—who can provide additional technical support. As these machines are surplus to our needs, our prices are very attractive, especially considering that the machines are virtually unused. We can assist with transport throughout Poland and the EU. Viewing prior to purchase is welcome.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Saw dimensions: 4300 × 4400 mm Blade projection: 95 mm Carriage feed: 5 – 120 m/min Carriage return: 120 m/min Pusher: 60 m/min 4 air cushion tables: 2000 × 600 mm 5 clamping grippers Bodpfx Ahoynkuaj Isld Available July 2026

Condition: excellent (used), Year of construction: 2011, Used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Blodpfjymx S Dsx Ah Isd Year of manufacture: 2011 Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rail (double track): 9 pieces Clamps: 7 pieces, first 3 are 2-fingered Air cushion table, width 650 mm: 4 pieces, each 2160 mm long Central blower: 1 unit with increased air output - 3 angled lift clamps (2-fingered) - 1 angled lift clamp (1-fingered) - 1st air cushion table: 800 mm wide - Speed package: -> Saw carriage feed: 1 – 150 m/min Technical specifications: Blade projection: 95 mm Saw carriage feed: forwards 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle pressure device, min. pressure width 0 mm; max. pressure width full cutting length Main saw motor: 18 kW, frequency controlled Scorer saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection value with HS motor 18 kW: 28 kW Power Control CADmatic 4.0 control unit with 17" flat display Labeling with part graphics / label software / label printer PICA 104

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. Machine details to follow… Bodpfsylp S Ejx Ah Isld Location: Friedeburg area Dismantling and delivery available at extra cost.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, cutting dimensions 4300x4300 mm cutting height 95 mm beam feed with grippers 90 m/min Bedpfoylbdtsx Ah Iold cutting speed up to 150 m/min, infinitely adjustable main motor power 13.5 kW scoring saw motor power 2.2 kW blade diameter 350 mm label printer 4 air tables extraction requirement 3800 m³/h external dimensions 6500x7700 mm

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 0-240-10-3388, functionality: fully functional, operating hours: 565 h, cutting width (max.): 4,250 mm, controller model: POWER CONTROL CADmatic 4 PROFESSIONAL, section length (max.): 4,300 mm, working height: 920 mm, Lightly used machine! Bledpfx Aeyla I Roh Ijd TECHNICAL DETAILS Cutting length: 4,300 mm Cutting width: 4,250 mm Saw blade projection: 95 mm Working height: 920 mm Speeds Saw carriage feed forward: 1–150 m/min Saw carriage feed backward: max. 150 m/min Program pusher speed forward: 90 m/min Program pusher speed backward: 90 m/min Angle cutting package Maximum panel thickness: 48 mm Leg length at 45°: min. 115 mm Angular accuracy at 1,000 mm: 0.1° Cutting angle: min. 0.0° MACHINE DETAILS Control system: POWER CONTROL CADmatic 4 PROFESSIONAL Main unit motor power: 13.5 kW Scoring unit motor power: 2.2 kW Mains voltage: 400 V Frequency: 50 Hz Required air pressure: 6 bar Compressed air consumption: 120 NL/min Extraction connection speed: approx. 26 m/s Negative pressure: 1,200 Pa Exhaust air volume: 3,800 m³/h Extraction connection—chip duct: 1 x 200 mm Extraction connection—pressure beam: 1 x 150 mm Operating hours: 565 h EQUIPMENT Power Concept Angle cutting package Groove-cutting package Automatic ejector rule Labelling package Data linkage to storage systems Note: Further details regarding machine configuration can be found in the attached document.

Condition: good (used), Year of construction: 1994, Panel saw Manufacturer: Striebig Model: Standard 3 TRK 6220A Year of manufacture: 1994 Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 80 mm Power: 4.4 kW Speed: 4,750 rpm Bsdpfxsyiazve Ah Iold Two small notches in the rear area of the saw blade shaft. Lower guide for the saw blade guard is missing.

Condition: excellent (used), Year of construction: 2009, Machine Data: Panhans S 45 All in One Year of manufacture: 2009 Cutting length: 4200 mm Cutting width (programmable pusher travel): 4200 mm Angle stop on the left Roller tracks: 9 pieces, first 3 are dual-lane Clamping grippers: 8 pieces Air cushion tables: 4 pieces Central blower: 1 unit Technical Data: Saw blade protrusion: 70 mm, at 45°: 50 mm Saw carriage feed rate: forward 1-120 m/min, reverse constant 120 m/min Programmable pusher speed: forward 0-80 m/min, reverse 100 m/min Automatic cutting height adjustment; pressure bar height control Angle alignment device: min. alignment width 0 mm; max. alignment width full cutting length Main saw motor: 14 kW, main saw 350 mm diameter Scoring saw motor: 1.5 kW, saw 180 mm diameter Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connected load: 20 kW Total weight: 6200 kg Blsdpfeyhnmgsx Ah Iod Control: VISIOLINE with PIOS Professional V2.0.0.x Labelling package incl. label printer

Condition: new, Year of construction: 2025, functionality: fully functional, power: 20 kW (27.19 HP), cutting height (max.): 110 mm, cutting width (max.): 4,300 mm, overall weight: 7,200 kg, cutting length (max.): 4,300 mm, table width: 4,300 mm, warranty duration: 12 months, Equipment: scorer, New Panel Dividing Saw / Saw Center – New Machine For sale is a new, high-performance panel dividing saw (saw center) designed for the industrial processing of wood-based materials, particle boards, MDF, HDF, and coated panels. This machine stands out for its high precision, powerful drives, and fast feed rates—ideal for professional furniture manufacturing and interior fittings. Technical specifications: • Maximum cutting length: 4,300 mm • Maximum cutting width: 4,300 mm • Minimum gripper opening during cutting: 34 x 45 mm • Maximum cutting height: 110 mm • Feed speed, saw unit (work cycle): 95 m/min • Return speed (rapid traverse): 120 m/min • Feed speed, program pusher: 95 m/min • Main saw blade: Ø 450 mm (bore 75 mm) Blsdpsyhhx Aefx Ah Isd • Scoring saw blade: Ø 200 mm (bore 50 mm) • Main motor power: 18.5 kW • Scoring unit power: 2.2 kW • Program pusher power: 2 kW • Saw carriage power: 2 kW • Total installed power: 33 kW • Pneumatic working pressure: 0.6 MPa • Number of clamps: 12 • Machine dimensions (LxWxH): 7,901 x 6,656 x 1,890 mm • Weight: 7,200 kg The machine is brand new and immediately available for operation. Ideal for series production as well as flexible custom manufacturing.

Condition: ready for operation (used), Year of construction: 2019, cutting length (max.): 4,300 mm, cutting depth: 4,300 mm, This MAYER Otto Meyer Type PS80P was manufactured in 2019. A robust panel saw with a cutting length and width of 4300 mm each, powered by a 9 kW main motor. Features include optimized travel speeds via an additional frequency converter and an automatic electronic clamping detection for panel corners. Consider the opportunity to buy this MAYER Otto Meyer Type PS80P panel saw. Contact us for more information. Bjdpfxoygw Aue Ah Ield • Main motor power: 9 kW • Optimized travel speeds of the main saw via additional frequency converter • Automatic electronic clamping detection for detecting panel corners • Note: The technical data and descriptions are copies of the order confirmation at the time. Data is for information purposes only and is not binding. Additional equipment • Label printer

Condition: used, Year of construction: 2017, machine/vehicle number: 1000021515, functionality: fully functional, power: 21.5 kW (29.23 HP), overall weight: 330 kg, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea bunului identificat în prezentul anunț Prima licitație va avea loc la data de 11.02.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, 18.03.2026, în aceleași condiții și la aceeași oră. În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 04.02.2026 între orele 10:00-14:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar și să își exprime intenția de participare, anterior datei stabilite. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Pasul de licitație este de 5% din prețul de pornire. Bledpjyfgxpefx Ah Iod Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA pentru bunurile de până la 5.000 euro și de 1.000 lei+TVA. pentru bunurile de peste 5.000 euro. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Equipment: documentation/manual, We offer for sale a very well-maintained HOLZ-HER 6210 panel saw center. The machine has been inspected, regularly serviced, and is in very good technical condition. 🔧 Basic parameters: Bledpfx Ahoydn Rqs Isd • Working cut dimensions: 4250 × 3850 mm • Overall machine dimensions: 6636 × 4420 × 1980 mm • Main motor: 11 kW • Scoring motor: 2.2 kW • Manual mode, EasyPlan, cutting optimization ⚙️ Construction: • Robust frame and precise guides • Stable and accurate operation even with larger panel sizes

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, cutting width (max.): 3,500 mm, saw blade diameter: 320 mm, overall weight: 4,800 kg, cutting length (max.): 4,200 mm, Equipment: scorer, TECHNICAL DETAILS Bljdpfeyc Sggox Ah Ijd Cutting area: 4,200 x 3,500 mm Saw blade projection: 80 mm Saw blade diameter: 300-320 mm Scoring saw blade diameter: 150 mm Saw carriage feed, forward: 5-100 m/min Saw carriage feed, return: 130 m/min Material pusher, forward: 25 m/min Material pusher, return: 80 m/min MACHINE DETAILS Motor power: 9 kW Scoring motor power: 1.2 kW Dimensions & Weight Weight: approx. 4,800 kg EQUIPMENT Label printer Control panel on left side 4 air cushion tables AV license dongle for Ardis optimization Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Used Panel Dividing Saw MAYER PS 2 Z - Year of manufacture: 2008 - Processing dimensions: 4300 x 2200 mm - Immediately available - Rear lifting table with powered heavy-duty rollers - Electronic pusher unit - All roller conveyors and air cushion tables included - Ideal for bundle cutting Bedpox Tcymsfx Ah Isld

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 220.242, functionality: fully functional, saw blade diameter: 350 mm, cutting length (max.): 4,300 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Additional Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5 Bjdpfx Ahox Sqpme Ield

Condition: excellent (used), Year of construction: 2011, HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (program pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping Jaw System Combi profile rail element, 2-track: 9 pieces Clamping jaws: 7 pieces Spacing: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Bledpfx Asx Nf E Rjh Iod Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Air cushion table nozzle manifold: 70 x 70 mm Feed and Program Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed backward: constant 130 m/min Program pusher speed forward: 80 m/min Program pusher speed backward: 80 m/min

Condition: excellent (used), Year of construction: 2011, HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift cut size: 4,300 mm x 2,200 mm Panel size for lift table feed, max.: 4,300 mm x 2,200 mm Panel size for lift table feed, min.: 1,200 mm x 400 mm Stack Heights Stack height of lift table, floor-level installation, max.: 560 mm Stack height of lift table, pit installation, max.: 780 mm Lift table load capacity, max.: 4 t Roller Rails Roller rail element, 10-track: 1 pc Roller rail element, 2-track: 6 pcs Clamps Spacing: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Extraction device position: 2,375 mm Air cushion table with rollers, 2,160 x 800 mm: 1 pc Air cushion table with rollers, 2,160 x 650 mm: 3 pcs Central blower: 1 pc Air cushion table nozzle pipe: 70 x 70 mm Bjdpfox Nf Eqjx Ah Isld

Condition: not inspected (used), Year of construction: 1993, power: 11 kW (14.96 HP), cutting width (max.): 4,300 mm, saw blade diameter: 400 mm, cutting length (max.): 4,260 mm, cutting height with scoring (max.): 105 mm, Equipment: scorer, Machine including Laweco conveyor lines with lifting device, load capacity 5,000 kg, platform size 4,100x2,100 mm. The machine comes from a company liquidation. Bljdox Iuzxspfx Ah Ied

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 241.125, functionality: fully functional, Horizontal Beamsaw of the manufacturer Schelling, designed for cutting wood-based material HPO – cutting optimization program Saw blade projection: max. 95 mm Saw carriage feed up to 120 m/min Cutting lengths: Model FH 4 430 - 4.300 mm Blsdpox Ebzdjfx Ah Isd Can be inspected in working condition until beginning 2026. (dismantling planned) Maximum Saw blade Diameter - 350 mm Projection - 95 mm Clamp opening 90 mm Power Saw motor - 15 kW Scorer Diameter 300 mm Feed rate forward up to 80 m/min reverse 80 m/min Saw feed rate forward up to 120 m/min reverse 120 m/min

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 Bljdpfxox Aqdce Ah Isd 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, cutting length (max.): 4,300 mm, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,200 mm, plate height: 60 mm, Placing a bid obligates the buyer to collect the equipment by calendar week 02 in 2026. Forklifts and transport aids can be provided by the seller. Up for auction is a combination consisting of two Holzma saws, connected to a Bargstedt storage system. TECHNICAL DETAILS HOLZMA PROFILINE HPL 380 Cutting and Lift Table Data Cutting length: 4,300 mm Lift table cutting size: 4,300 mm x 2,200 mm Maximum panel size for lift table loading: 4,300 mm x 2,200 mm Minimum panel size for lift table loading: 1,200 mm x 400 mm Stack Heights Stack height for lift table, floor installation max.: 560 mm Stack height for lift table, pit installation max.: 780 mm Lift table maximum load capacity: 4 t Bsdoxy Ng Rspfx Ah Ijld Roller Rails Roller rail element, 10 tracks: 1 piece Roller rail element, 2 tracks: 6 pieces Clamping Jaws Pitch: 75/275/475/1,075/1,825/2,625/3,425 mm Extraction and Air Cushion Tables Push-off device position: 2,375 mm Air cushion table with rollers 2,160 x 800 mm: 1 piece Air cushion table with rollers 2,160 x 650 mm: 3 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm HOLZMA PROFILINE HPP 380 Cutting Data Cutting length: 4,300 mm Cutting width (programmable pusher travel): 4,250 mm Saw blade projection: 95 mm Combi and Clamping System Combi profile rail element, 2 tracks: 9 pieces Clamping jaws: 7 pieces Pitch: 75/275/475/1,050/1,850/2,650/3,450 mm Manual trimming stops on clamping jaws: 4 pieces (positions 75/475/1,050/2,650 mm) Air Cushion Tables and Extraction Air cushion table with roller element 2,160 x 650 mm: 4 pieces Central blower: 1 piece Nozzle duct for air cushion tables: 70 x 70 mm Feed and Programmable Pusher Saw carriage feed forward: 1–130 m/min Saw carriage feed reverse: constant 130 m/min Programmable pusher speed forward: 80 m/min Programmable pusher speed reverse: 80 m/min BARGSTEDT PROFILINE TLF 420 Panel thickness: 3–60 mm Maximum panel size: 4,300 mm x 2,200 mm Maximum traverse length: 5,200 mm Measuring and Correction System Length measurement: integrated Width measurement: integrated Automatic rotation correction: available Note: Further technical details can be found in the attached order confirmations.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, operating hours: 1,200 h, Panel dividing saw Holzma HPP 380 Profiline with automatic labeller. Bledpfsxytlksx Ah Iod