Heller Design

Condition: good (used), mileage: 128,232 km, Year of construction: 2014, operating hours: 14,003 h, Manufacturer: Terex Demag Type: AC 40-1 City Year: 2014 Gedpfx Ajz Ar Iijdtoug Capacity (t): 40 t Main boom: 31.2 m Kilometers: 128,232 km Crane hours: 14,003 h Optional jib: 13 m Runner: 1.2 m

Condition: good (used), functionality: fully functional, empty load weight: 6,120 kg, maximum load weight: 24,880 kg, overall weight: 31,000 kg, total length: 13,500 mm, total width: 2,500 mm, Year of construction: 2005, Manufacturer: Gföllner Type: SPL 2 / 2 Axle Year: 2005 Own weight: 6,120 kg Payload: 24,880 kg Total weight: 31,000 kg Length: 13.50 m Godez Ar Icjpfx Adtoug Width: 2.50 m

Condition: good (used), functionality: fully functional, Year of construction: 2008, We have two of these lowbed trailers available. Manufacturer: Goldhofer Type: STZ-VKL 3-34/80A Year: 2008 Total weight: 54,000 kg Own weight: 21,000 kg Guedpfx Adez Ar Hxjtog Payload: 33,000 kg Overall train length: 20,000 mm (max. telescoped 24,200 mm) Loading area (l x w): 7,300 mm x 2,750 mm (telescopic to 4,200 mm) Tires: 235/75 R 17.5 Extra: Extension beam: 2 x 6,000 mm

Condition: excellent (used), functionality: fully functional, maximum load weight: 350,000 kg, Year of construction: 2016, operating hours: 8,860 h, Manufacturer: Liebherr Type: LTM 1350-6.1 Year: 2016 Capacity: 350 t Main boom: 70 m Luffing lattice jib: 78 m Kilometers: 73,053 km Crane hours: 8,860 h Godpfxsz Ar Hle Adtjug Carriage hours: 3,219 h Winches: 2 Counterweights: 140 t Hook block 5 sheave: 125 t Hook block 3 sheave: 80 t Tires: 445 / 95 R25 Y-telescopic boom Remote control

Condition: used, Year of construction: 2002, Chiron FZ 15 W High Speed Twin Pallet Vertical Machining Centre. Serial No. 147-18 (2002) with Fanuc Series 18i-M Control, Dual Peiseler AWUP 160 NC Rotary Units, Air Bench Mist Filtration Unit, Swarf Conveyor. Country of Origin: Germany Guedpfx Adsz Ar Ezstog Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), functionality: fully functional, mileage: 26,994 km, Year of construction: 2016, operating hours: 1,684 h, Lower carriage / Undercarriage Manufacturer: Liebherr Type: MK 88 PLUS Year: 2016 Kilometers: 26,994 km Upper carriage / Upper carriage Hours: 12,509 h Undercarriage hours: 1,684 h Load capacity: 8,000 kg Gjdpoz Ar Eujfx Adtjug Main boom: 30 m Max. boom length: 45 m / 2,050 kg Max. hook height: 59.10 m

Condition: good (used), functionality: fully functional, mileage: 681,407 km, empty load weight: 19,575 kg, maximum load weight: 6,425 kg, overall weight: 26,000 kg, loading space length: 6,600 mm, loading space width: 2,550 mm, Year of construction: 2016, operating hours: 4,750 h, Truck: Gjdpfxez Ar Enj Adteug Manufacturer: Scania Type: R490 Year: 2016 Mileage: 681,407 km Unladen weight: 19,575 kg Payload: 6,425 kg Gross vehicle weight: 26,000 kg Crane: Manufacturer: Palfinger Type: PK 53002 SH Year: 2016 Capacity: 53 m/t Hours: 4,750 h Boom: 14 m Trailer loading area Length: 6.60 m Width: 2.55 m Height including tires: 1.65 m

Condition: used, Year of construction: 1998, Walter Heli-Power Production 5-Axis CNC Tool Grinder. Serial No. 6802 (1998). Country of Origin: Germany Centralised Cutting Oil Tank and Eclipse Automag Oil Filtration/Separation System (2016) Please note: This item will be awarded to the highest bid from Lot 1, Lot 1A or Lot 2 Guedoz Ar Ebjpfx Adtjg Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Guedpfx Aez Ar D Rodtsg Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: good (used), functionality: fully functional, mileage: 28,063 km, maximum load weight: 45,000 kg, Year of construction: 2019, operating hours: 4,535 h, Manufacturer: Liebherr Type: LTF 1045-4.1 Year: 2019 Capacity (t): 45 t Main boom: 35 m Guodpfx Adoz Ar Dwotsg Jib: 9.5 m Mileage: 28,063 km Crane hours: 4,535 h Counterweights: 9 t

Year of construction: 2000, condition: used, Walter Helitronic Power Production 5-Axis CNC Tool Grinder. Serial No. 650083 (2000). Country of Origin: Germany Guodpfsz Ar Dqjx Adtsg Centralised Cutting Oil Tank and Eclipse Automag Oil Filtration/Separation System (2016) Please note: This item will be awarded to the highest bid from Lot 1, Lot 1A or Lot 2 Location: These lots are located in Sheffield, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: new, Weldguide IV, a professional seam tracking system for monitoring and controlling welding processes. Suitable for automated and robotic welding applications. Gsdsz Ar Dkepfx Adtsug

Condition: good (used), functionality: fully functional, mileage: 162,000 km, maximum load weight: 8,000 kg, Year of construction: 2009, operating hours: 15,200 h, Manufacturer: Liebherr Type: MK 110 Year: 2009 Capacity (t): 8 t Main boom: 52.00 m Kilometers: 162,000 km Crane hours: 15,200 h Guedpfx Adsz Ar Ddetsg Undercarriage hours: 6,700 h Max. lifting height: 33 m Drive: 10 x 8 x 10

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, overall weight: 20,000 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 40, number of axes: 5, This 5-axis FPT DINO was manufactured in 2002. It features an impressive X-axis travel of 2800 mm, Y-axis travel of 1600 mm, and Z-axis travel of 800 mm. The machine is equipped with a HEIDENHAIN TNC 530 control unit and a spindle speed of 20000 rpm. If you are looking to get high-quality machining capabilities, consider the FPT DINO vertical machining centre we have for sale. Contact us for further details. • Head type: Continuous 2-axis universal head • Power rating: 68.7 kW • Voltage: 380 V • Frequency: 50 Hz • CE mark: Yes Gsdez Ar Ayjpfx Adtoug Additional equipment • High-pressure coolant system (included) • Chip conveyor (included) Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 1999, Mori Seiki MV-653/50 Heavy Duty Vertical Machining Centre. Serial No. 92 (1999) with MSG-502 Control, Table Size, 1700 x 660mm, 50 INT Taper, 80 Position ATC, High Pressure Coolant, Through Spindle Coolant, 15,000rpm Max Spindle Speed, Swarf Conveyor Please Noter: Nikken 500mm dia 4th Axis & Powered Tailstock not included can be purchased as a separate lot. Gsdpfsz Ar Atsx Adteug Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 2 of Auction 3505 Gujdpfx Adjz Ar Ageteg

Condition: used, functionality: fully functional, mileage: 466,190 km, power: 346 kW (470.43 HP), first registration: 07/2022, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Large cab capacity with high roof GX Battery, 12 V, 230 Ah, 2 units, maintenance free Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e MAN TipMatic 14.27 DD Advanced Emergency Brake Assist (EBA) Driver comfort Air-conditioning system, Climatronic Comfort driver's seat, air-sprung, with lumbar support and shoulder adjustment Co-driver's seat, not sprung, length and backrest adjustment Bunk, top, with slatted support Bunk, bottom, with slatted support Auxiliary water heater 4 kW (night heater) Fridge and drawer, 1 unit, centre area, to rear Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Tyres for front axle, Goodyear 315/70R22.5 KMAX S G2 Steering-Short haul TL Tyres for rear axle, Goodyear 315/70R22.5 KMAX D G2 Drive-Short haul TL Main wheelbase, 3,900 mm Axle ratio, i = 2.31 Fuel tank capacity 580 l, left Fuel tank capacity 580 l, right AdBlue tank capacity 80 l, left Road speed limiter, adjustable, limiter (engine speed regulation) Gsdpfx Adez Ar Aaetjug Technology MMT infotainment system, Advanced Basic MAN TeleMatics Exterior Front headlights, LED Daytime driving lights, LED Fog lights, LED Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range Side flaps, left folding and right fixed Tyres Information Front left - 6 mm Front right - 8 mm Rear left inner - 12 mm Rear left outer - 12 mm Rear right inner - 12 mm Rear right outer - 12 mm

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 21197, overall weight: 2,100 kg, number of drawers: 100, power: 2 kW (2.72 HP), Gühring TM-136 Tool Storage System Year: 2006 Power supply: 230 V, 2 kW Empty weight: 2,100 kg Maximum total load: 6,000 kg Gusdpfx Adez Arz Njtog Industrial tool dispensing and storage system with various drawer sizes. Used condition. More information and photos available on request.

Condition: used, Year of construction: 2006, Okuma Space Centre MA-600HB Horizontal Twin Pallet Machining Centre with Okuma OSP-P200M CNC Control System. Serial No. 1296158 (2006), X Axis = 1,000mm, Y Axis = 900mm, Z Axis 1,000mm, Spindle Nose NT 50, Spindle Speed Std 6,000rpm, Spindle Drive VAC 30/22kw, Pallet Size 630 x 630mm, Max Weight on Pallet 1200kg, Pallet Indexing 1 deg, Pallet Change Time 11 seconds, Max Work Piece Size Ø 1,000 x 900 High, Axis Drives Feed Rate X, Y, Z Axis 1 - 60,000mm/min, Rapid Traverse X, Y, Z Axis 60,000mm/Min, Automatic Toolchanger No. of Tools 40, Floor Space 3,380 x 6,140mm, Machine Weight 24,000kg Approx. Qty of 50 INT Spindle Tools (Back End Only). Country of Origin: Japan Guedpfx Aoz Arzvodtsg Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2017, total width: 100 mm, total length: 300 mm, total height: 180 mm, overall weight: 12 kg, MACH-ID 9686 Make: ECKOLD Type: HLR60 Gsdpfjz Arzpsx Adteug Year: 2017 Length:300mm Width:100mm Height:180mm Weight:12kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2022, For Sale: NUKON EXTREME LARGE 30250 BEVEL Fiber Laser Cutting Machine (2022) equipped with a powerful 15 kW nLIGHT Fiber Laser with Corona Beam Shaping Technology and a ±45° BEVEL cutting head. This machine is designed for the efficient processing of large-format plates, heavy steel structures, and thick materials in demanding industrial environments. Key Features Gusdpfx Adez Ary Ejtsg ✅ Working area: 3,000 x 25,000 mm ✅ 15 kW nLIGHT Fiber Laser Source with Corona technology ✅ BEVEL cutting up to ±45° for weld preparation ✅ Beckhoff CNC Control & Servo Drives ✅ Processing of workpieces up to 24,750 kg ✅ Fully operational and currently in production ✅ Inspection and cutting tests possible ✅ Operating hours : 8065h Technical Specifications - Manufacturer: NUKON - Model: Extreme Large 30250 BEVEL - Year: 2022 - Laser Type: Fiber Laser - Laser Power: 15,000 W - Laser Source: nLIGHT with Corona Technology - Working Area: 3,000 x 25,000 mm - X Travel: 25,100 mm - Y Travel: 3,100 mm - Positioning Accuracy: 0.1 mm - Maximum Workpiece Weight: 24,750 kg - Mild Steel: up to 40 mm - Stainless Steel: up to 30 mm - Aluminium: up to 30 mm - Machine Weight: approx. 55,000 kg Working area: 3,000 x 25,000 mm * Manufacturer: NUKON * Model: Extreme Large 30250 BEVEL * Year: 2022 * Laser Type: Fiber Laser * Laser Power: 15,000 W * Working Area: 3,000 x 25,000 mm * Maximum Workpiece Weight: 24,750 kg * X Travel: 25,100 mm * Y Travel: 3,100 mm * Machine Weight: approx. 55,000 kg Operating hours: 8065h

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 01 Crumbler, type of input current: three-phase, year of last overhaul: 2026, working width: 1,800 mm, roller length: 1,400 mm, CPM PELLET 855 CRUMBLER Model 855 DA Gsdsz Aryxopfx Adtjug Manufactured in 1988 Rated capacity of 20 tons per hour. Consisting of the following: 2 x 11 kW, 1800 RPM, 3-phase, 440V motors 8-inch diameter x 55-inch long chilled cast iron rolls.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10 mm, input voltage: 400 V, overall weight: 32 kg, warranty duration: 6 months, KÄRCHER HD 8/18-4M ST PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-braided hose, and an adjustable nozzle. A durable brass pump head with new ceramic pistons and seals ensures long-lasting, trouble-free operation. A highly efficient three-phase motor ensures stable performance, even during prolonged use. With operating parameters of 180 bar and 760 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features individually taken photos; you are buying the exact machine shown. TECHNICAL DATA: Power supply: 3-phase - 400 V - 50 Hz Flow rate (l/h): 760 Operating pressure (bar): 180 Max. pressure (bar): 200 Connected load (kW): 4.6 Weight (kg): 32 Dimensions (L x W x H) (mm): 290 x 300 x 565 Hose length (m): 10 EQUIPMENT: NEW durable spray gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 10m steel-braided high-pressure hose NEW adjustable nozzle Guodpjz Aryrsfx Adtjg Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Highly legible and... intuitive control panel Its simple design and easy access to internal components make the machine user-friendly and easy to service.

Condition: used, Year of construction: 2024, Ficep Excalibur 1201 EX Sectional Steel CNC Milling & Drilling Line. Serial No. 38008 (2024),18m Fixed Extension (12m Long Section), Profile Size Min/Max 50/1200mm, 9 Position ATC, Max Drilling Diameter 40mm, Spindle Power 19kW, HSK63 Spindle Taper, Max Spindle Speed 5000rpm, Sub-Spindle Stroke 200mm, X-Axis Positioning, Clamping, Drilling Unit, Light Guard Surrounds. Country of Origin: Italy This lot has been professionally dismantled. Gjdpfxsz Aryls Adtjug Location: These lots are located in Wolverhampton, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: new, Year of construction: 2022, functionality: fully functional, ABB B23 112-10E – Three-Phase Energy Meter Lot of 100 ABB B23 112-10E energy meters. The meters are new and unused and are supplied in their original packaging. Ideal for industrial installations, electrical panels, energy monitoring, and larger projects. Product details: Manufacturer: ABB Model: B23 112-10E Article No.: 2CMA104350R1000 Active energy: Class B 3-phase 3x220/380 – 3x240/415 V 0.25–5(65) A 50/60 Hz 1000 imp/kWh Made in Italy Quantity offered: 100 pcs Condition: New / unused Gujdpfx Adez Aryfstog Larger quantities are available in stock. Please contact us for pricing on larger quantities. Location: Rotterdam, The Netherlands Condition: New / unused Worldwide shipping is possible. SURPLUS – Industrial Solutions From Surplus to 2nd Life