G. Nowack & Sohn

Condition: used, Year of construction: 2022, Empty weight: 2.450 kg Auction item. Ffjdsx Tbfnspfx Agmst Hedgecutter in working condition. Sold together with RCH 1350 E Spider. Has hitches for FENDT tractor.

Condition: new, Year of construction: 2023, Watering arm / irrigating boom    • Integrated tractor bumper    • Cat 2 three-point linkage    • Approx. 6 metre reach    • 2" galvanised piping    • Hose and spray head with Storz coupling    • Double-acting hydraulic cylinders    • Heavy-duty slewing ring Ffedpfx Aox S Sa Hogmot    • Mechanically rotatable in 5 positions    • Available from stock! Condition: New Year of manufacture: 2023

Condition: new, Year of construction: 2024, Empty weight: 640 kg Fsdpfx Agex S Ra Ejmeft

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 Fjdpfx Aex R Uw Segmoft - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, Year of construction: 2024, Front Boom Mower MFK 500 Base Unit for Single- or Two-Man Operation * Mounting Plate: Suitable for front attachment plate size 3 or 5 * Right- and left-hand working possible * Boom swivel range: 190 degrees * Hydraulic collision protection with damping of the boom system via hydraulic accumulator * Hydraulic lateral movement of the boom by 1,800 mm * Engagable/disengagable float position for implement attachments * Quick-change system for implements * Safety Stop: Electric cutting shaft on/off from the control panel, incl. brake valve (cutter shaft run-down approx. 4 sec.) * Hour meter * Park position for boom arm and implement in front of the carrier vehicle Proportional Control mlcontrol Permanent Hydraulics (CAN-Bus Technology) * Dual cylinder operation for simultaneous execution of multiple functions * Boom relief control Type AER: Infinitely adjustable contact pressure, can be engaged/disengaged * Operator information system with TFT color display, incl. system monitoring and diagnostic help * mltronic relief control: Computer-assisted contact pressure control for the mower head using travel/force sensors * Switchable to boom relief control Type AER (only with certain mower heads) mlbasic Multifunction Joystick * One-hand control panel with multifunction joystick Implement Drive & Hydraulics * Front PTO for implement drive * Hydraulic pump for implements: 62 l / 340 bar * Oil fill: Mineral oil HLP 46 (only with implement drive via front PTO) Ffsdpfx Agjx R Uwrjmot Boom System * Telescopic boom: Hydraulically adjustable, reach extendable by 1,000 mm (max. 7.00 m from vehicle center, for Unimog from U400-U500 / U318-U535) Additional Equipment * Valve (single electric-hydraulic switching): Switchable from control panel, for additional hydraulic double function * Hydraulic rotation device: Swivel range 230°, integrated on boom side, incl. quick-change plate, can be used with multiple implements * Hydraulic quick couplers: Kit for flat-sealing quick couplers on the mower * Paint: Orange RAL 2011, low-emission (2-component paint process) Mower Head MK 1200 plus * Working width: 1,200 mm * Cutting thickness: Max. 20 mm * Incl. debris guard Other Notes: * Trade-ins and purchase of vehicles and machines possible. * Sale price does not include transport. * No liability for print or typographical errors. * Subject to error, change, and prior sale. * Offer non-binding. * Photos may differ. Price applies to the condition as is. * All details provided without guarantee. Further Information New: No

Condition: used, Empty weight: 600 kg Working width: 180.000 cm Ffjdpfx Agex I Hi Ijmjt

Condition: new, color: yellow, Working width: 12.500 cm Ffedjx I Hgyjpfx Agmot

Condition: new, color: orange, The ideal mower for smaller tractors, mows both behind and next to the tractor. Also suitable for slopes and dikes. Equipped with height-adjustable skids. Rotor diameter 107mm. Condition: New Fodpfxex I Hgme Agmoft

Condition: new, color: red, New bevel flail mower Easy for flail mowing ditch edges and roadsides. Ffodpfxox I Hggj Agmjt Available in different widths A suitable mower for every tractor The AGF bevel flail mowers are suitable for use behind the tractor or in bevel. The mower can mow diagonally in a slope and perpendicularly upwards for flail mowing, for example, shrubs. The drive box is mounted next to the flail mower to be able to mow deeper in a slope. The mower is equipped with hammer flails. Condition: New

Condition: new, Year of construction: 2024, Empty weight: 650 kg Working width: 200 cm Ffodox I Hf Nspfx Agmjt Required tractor power: 110 hp

Condition: new, Year of construction: 2024, Empty weight: 705 kg Ffedpfxex I Hd So Agmot

Condition: new, color: orange, Flail mowers equipped with sidsift, mechanical or hydraulic. The flail shaft is equipped with hammer flails. Available in category I and II for the 3-point linkage. Equipped with a roller at the back to determine the cutting height. Ffsdpfx Asx I E Tfjgmet Condition: New

Condition: new, color: red, The AGL bevel flail mowers are suitable for use behind the tractor or in bevel. The mower can mow diagonally in a slope and perpendicularly upwards for flail mowing, for example, shrubs. The drive box is mounted on top of the flail mower to leave less residue when mowing vertically. Flailing a hedge or shrubs close to the ground. The mowers are equipped with hammer flails. Ffjdpfx Agox I E R Rjmjt Condition: New

Condition: new, color: orange, Pasture toppers for neatly mowing grass left behind by cattle. Can also be used for mowing grass in a large lawn, for example. Suitable for tractors from 14 to 80 hp with 3-point hitch category I or II. BLG types are galvanized for a longer lifespan. Condition: New Fjdpfsx I E R Dox Agmjft

Condition: new, Year of construction: 2025, Working width: 210 cm Fodpex I D Axsfx Agmeft

Condition: used, Year of construction: 2017, Working width: 140 cm Required tractor power: 20 hp Ffodex I Dx Hjpfx Agmst

Condition: used, color: red, Year of construction: 2013, Working width: 250 cm Fsdpfxjx I Dxyo Agmoft

Condition: used, Hemos ditch cleaner Fedpfx Asx I Dvfegmsft • Fresh from work! Condition: Used

Condition: used, power: 126 kW (171.31 HP), Year of construction: 2022, operating hours: 7 h, Equipment: all wheel drive, Husquarna RC 320Ts sAWD Lawn mower Operating hours: only 7.6 h! Year of manufacture: 2022 Very good condition, immediately ready for use. Ffedpfx Ajx Ixzpegmot Upon request, we can provide a leasing or financing offer. Mr. Mihm (phone) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale!

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), first registration: 09/2015, fuel type: diesel, color: red, axle configuration: 4x4, operation weight: 1,500 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Year of construction: 2015, operating hours: 2,398 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, Self-propelled work machine, mower: + Toro + Groundsmaster 360 + Year of manufacture: 2015 + 2,398 operating hours + 4-cylinder Kubota diesel engine, 1,498 cc, 35 HP + All-wheel drive + Selectable all-wheel steering + Hydrostatic drive, max speed 20 km/h + Front and mid-mount lift arms + Front hydraulics + PTO (power take-off) + Beacon lights + Full cab with opening windows + Air conditioning / heating + Hand throttle + Toro rotary mower deck with 3 blades, 180 cm cutting width Optional: + Müthing front mulcher + Type MU-FM + 160 cm working width + 240 kg + Year of manufacture: 2015 Ffodpfx Agjx E R Enomjt Municipal vehicle from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos excepted, subject to prior sale!

Condition: repair required (used), functionality: not functional, mileage: 12,193 km, power: 50 kW (67.98 HP), first registration: 09/2004, overall weight: 3,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, operation weight: 2,065 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Year of construction: 2004, operating hours: 7,375 h, Equipment: ABS, air conditioning, all wheel drive, differential lock, hydraulics, trailer coupling, Tractor / Agricultural Tractor: + Reform-Werke Fsdjxxvwgjpfx Agmsft + Metrac H7S (226.050.038) + First registration: 10.09.2004 + 12,193 km; 7,375 operating hours + Hydrostatic transmission (max speed 40 km/h) + 4-cylinder VM diesel engine, 68 hp, 2,970 cc + ENGINE DAMAGE: PUSHES OIL OUT THROUGH THE VENTILATION; DOES NOT START WHEN COLD + PTO shaft 540 rpm front and rear + Front linkage with side shift + Front and rear hydraulic connections + Optional front-, rear-, all-wheel steering + crab steering + Radio/CD + Air conditioning + Jaw-type hitch; 3,500 kg towing capacity; 500 kg vertical load + All-wheel drive + Differential locks + Municipal vehicle from first owner Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: used, functionality: fully functional, power: 14 kW (19.03 HP), fuel type: diesel, color: red, axle configuration: 4x4, operation weight: 550 kg, empty load weight: 550 kg, fuel: diesel, gearing type: hydrostat, operating hours: 2,762 h, Equipment: all wheel drive, Lawn mower: Ffodpfsxtfmgox Agmjt + Aebi + TerraCut TC07 + 2,762 operating hours + Hydrostatic drive + Permanent all-wheel drive + Zero-turn mower + Front linkage + Front PTO + Kubota diesel engine, 19 HP + Vmax 16 km/h + 240 cm x 110 cm (LxW) + 550 kg + Humus mulching unit with Y-blades + Type: SMK/E145 + Machine from first owner Optional at extra cost: Rotary mower deck Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typographical mistakes possible, subject to prior sale!

Condition: excellent (used), functionality: fully functional, power: 36 kW (48.95 HP), overall weight: 2,100 kg, fuel type: diesel, color: orange, Year of construction: 2014, operating hours: 817 h, Equipment: all wheel drive, For sale: A540 DiXL V-2203 Spider – Professional Chipper in Excellent Condition Operating hours: only 817 First registration: Ex-government vehicle from Germany, decommissioned since 2022 Condition: Very well-maintained, fully functional Maintenance: Professionally serviced by authorized workshop Last major service at: 769 operating hours Special feature: No exhaust aftertreatment system – ideal for straightforward operation and maintenance Technical Specifications: Model: A540 DiXL V-2203 Spider Drive engine: Kubota V-2203 (diesel) Power output: 35.9 kW / 48.8 HP Engine type: 7 DF 5859 Max. feed opening (W x H): 210 x 190 mm Chip length: Infinitely adjustable up to 20 mm Number of blades: 2 (plus 2 spare blades included) List price (new): €74,000 Chassis & Mobility: Fjdpfjxq Sa Uex Agmsft Crawler chassis with hydraulic adjustment Height adjustment: up to 300 mm Width adjustment: up to 420 mm Leveling adjustment for uneven terrain Diesel tank: 30 liters Exceptionally off-road capable and versatile in use Conclusion: This A540 DiXL is the ideal machine for professional forestry and landscaping applications. It impresses with its robustness, ease of use, low operating hours, and excellent technical condition. The last major service was completed at 769 operating hours – the machine is therefore ready for immediate use. No exhaust aftertreatment – making it particularly low-maintenance and easy to operate. Viewing and test operation available by appointment.

Condition: used, power: 10 kW (13.60 HP), first registration: 09/2013, overall weight: 2,300 kg, color: red, maximum load weight: 5,000 kg, driver cabin: other, gearing type: other, emission class: none, Year of construction: 2013, * German equipment * Condition as shown in the photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Dücker MK25 mower combination consists of base unit, RSM mower & DUA800 arm * We will gladly send you a video of the MK25 mower combination * Complete documentation * Dücker MK25 mower combination, year of manufacture 2013 * Mower combination consisting of embankment mower and verge mower on arms. For municipal carrier vehicles and tractors with municipal plate sizes Gr. 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touch display. Usable on both left and right side. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. Fsdpjxl Snuofx Agmjft * DUA 800 arm with 3-part boom and telescopic section. Reach from vehicle center up to 7.80 m. Hydraulic lateral shift up to 1.60 m. Suitable for right and left operation. Swivel angle 270°. Standard arm relief. Float position. VMS 1200 flail mower head, working width 1.20 m. * RSM arm: Computer-assisted control with automated buttons via control panel. Optimal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m sideways and 3.20 m forwards. Conversion between right and left operation possible. TMK 1300 flail mower head, working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Attachment: municipal plate size 3 | municipal plate size 5. Reach: 7.80 m | 3.60 m. Arm swivel angle: 270°. Hydraulic lateral shift: 1.6 m. Maximum PTO speed: 710 rpm. Required vehicle hydraulic capacity: minimum 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer generally DOES NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and test of the item to avoid any misconceptions about the condition and suitability for the buyer. Viewing and testing are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently confirm the condition and features of the equipment/vehicles. Subject to prior sale, changes, and errors.

Condition: new, Year of construction: 2022, working width: 3,000 mm, Cutter bar: Discs | Claas Rear Disc Mower Disco 320 C Stock item from 2023 Disc mower with tine conditioner 3.0 m working width 1130 kg net weight with MAX CUT cutter bar 7 disc modules with 2 blades each incl. quick blade change 1000 rpm PTO speed Mounting category II | Internal No.: 11054146 Fodjxf U N Ujpfx Agmsft