Cnc Machines

Condition: good (used), Year of construction: 1982, functionality: fully functional, Traub CNC turning machine TND360, TX8, year of manufacture 1982, serial number >600. Includes 1 turret, tailstock, chip conveyor, draw tube, and 3-jaw chuck KNCS250. Dksdpfozcdnvsx Akton The images show the machine in its production environment. The machine can be inspected while powered on.

Condition: used, Year of construction: 2011, functionality: fully functional, JANUS VMC-1600 CNC controller: FANUC Series 0i-MD Max. travel: X 1600mm, Y 700mm, Z 700mm Work table: 1750mm x 700mm Max. spindle speed: 10,000 rpm Spindle taper: BT40 Dkedpfxezcb Nke Akton Tool magazine: 24 tools Machine equipped with a chip conveyor Year of manufacture: 2011 Machine in very good condition.

Condition: like new (used), Year of construction: 2017, operating hours: 515 h, functionality: fully functional, turning diameter over cross slide: 350 mm, turning length: 650 mm, turning diameter: 350 mm, travel distance X-axis: 255 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 4,500 rpm, total height: 1,740 mm, total length: 2,610 mm, total width: 2,260 mm, torque: 240 Nm, overall weight: 3,400 kg, This machine is still in operation in a training workshop and is in like-new condition. Spindle hours: 564 Dkedpjzb Rwhjfx Aktjn Extensive accessories: Clamping devices, jaws, driven and fixed tool holders, as shown in the images in the advertisement. CNC universal lathe NEF 400 V3 3D control Siemens SL Operate CELOS Internal clamping device 3-jaw chuck BBD210-66 Set of soft top jaws, 3 pieces Coolant spray gun Main spindle reduction sleeve Design variant "BLACK" Hydraulic unit Foot switch for tailstock operation Technology cycle, alternating speed Documentation in German NETSERVICE (CELOS) SERVICE AGENT (CELOS) MESSENGER (CELOS) Programming/training software Sinutrain oper. for 6 participants DMG MORI training box for turning CNC control: 👉 Siemens SINUMERIK 840D sl 👉 Siemens SINUMERIK 840D sl User interface: 👉 CELOS (DMG MORI) Programming: 👉 ShopTurn (dialog programming) Under "Documents" you will find technical data in PDF format, a brochure for the control system, and other PDFs about transport.

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm Dkedpfx Akszb Ipzston 1750 mm between centres Coolant pump and tank

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo 2-Axis X,Z Turning Center CE Certified Puma 250B Model Fanuc CNC Control Year 1998 Dkjdpfxozb Ik Sj Aktsn Sold as a Complete Unit Chip Conveyor Documentation Included Reference: A044

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, WE OFFER AN SPINNER CNC TURNING AND MILLING LATHE. MACHINE IS COMES FROM 1.ST OWNER , MAKING PARTS FOR DOORS, WINDOWS-SMALL PARTS MACHINE COMEST WIT ALL TOOLINGS, BAR FEEDER IS NOT INCLUDED Dedszbvthspfx Aktekn MACHINE WILL BE AWAILIBLE IMEDIATELY DIRECT FROM THE PRODUCTION.

Condition: excellent (used), Year of construction: 2012, CNC lathe, 3 axes, MAZAK QT SMART 200M Year of manufacture: 2012 Condition: Very good Max. turning diameter: 360 mm Max. turning length: 532 mm Max. milling spindle speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm - CNC control: Mazatrol Smart - 3-jaw chuck: KITAGAWA BB-208, diameter 210 mm - Tool Eye - C-axis Dodpfx Akezbrmqotekn - Interface for bar feeder - NC tailstock - Chip conveyor, side discharge

Condition: excellent (used), Year of construction: 2006, CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Travel X: 245 mm Numerical Command FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 41 mm Max Rotation: 3500 RPM Dksdpfx Ajzblhnskten Turret: 8 tools VDI 30 Year of construction: 2006 Spindle motor: 5,5 kW 3 speed ranges Centralized lubrication pump Delivered with 2 3-jaws chuck Ø 160 mm Delivered with some tool holders (see photos) Voltage: 380 V Dimensions (L x W x H): 2500 x 2000 x 1900 mm Weight: approx 2 T Machine in very good condition

Condition: used, Year of construction: 2007, functionality: fully functional, CN ROSILIO TBI 280 TURRET LATHE Machining Capabilities Dedpfx Aezbidtoktokn • Swing over bed: 280 mm • Maximum machining diameter: 220 to 250 mm, depending on the version • Maximum machining length (Z-axis): 350 mm • X-axis travel: 145 mm (including 20 mm below zero) Spindle • Maximum speed: 6000 rpm • Spindle nose: A2 5 • Motor power: 5.5 / 7.5 kW • Spindle bore: 42 mm • Chuck: hydraulic Turret • 8-position VDI 30 intelligent turret • Coolant supply to each position Available CNC Controls • Siemens 802D SL General Data • Rapid traverse rates: o X-axis: 10 to 15 m/min o Z-axis: 20 to 30 m/min Tailstock: o CM4, sleeve Ø70 mm, travel 65 mm, total travel 400 mm Footprint: 2000 × 1450 × 1800 mm Weight: 2200 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, CNC Control: Fanuc Series 18i-T X-axis travel mm: 242 Y-axis travel mm: - Z-axis travel mm: 1,300 Capacity / swing mm: 570 Max. length mm: 1,280 Max. turning diameter: 350 Bar capacity mm: 90 Spindle speed rpm: 3,500 Spindle power kW: 22 Nose / taper: A2-8 Dodpfx Ajzawvusktokn Chuck / table: 10 inches Turret / tool changer: 12 stations / live tools Series: 30LM0121 Manufactured in: Korea EQUIPMENT: Powered tools Fixed tool holders Steady rest: Included Self-centering chuck: Included Electrical cabinet: Included Manuals

Condition: ready for operation (used), Year of construction: 2000, Make: DAEWOO Type of machine: Puma 230 Year of manufacture: 2000 Control system: Fanuc 18-T Machine's weight: 4.500 kg Speed range: 4.500 U/min Cutting diameter: 350 mm Dkedpfxszawa Ho Aktsn Turning length: 500 mm Overall dimensions: 3,0 x 1,8 x 1,9 m Tool turret - slots: 12 Pl. Spindle opening: 65 mm

Condition: good (used), turning diameter: 381 mm, HAAS ST-30 – 2008 CNC lathe without powered tools Manufacturer: HAAS Model: ST-30 Year of manufacture: 2008 Technical specifications: Chuck diameter: 254 mm (10") Maximum turning diameter: 381 mm Maximum diameter over bed: 806 mm Maximum turning length: 826 mm Spindle bore: 76 mm Spindle bore diameter: 88.9 mm Spindle nose: A2-6 Maximum spindle speed: 3400 rpm Spindle power: 22.4 kW Maximum torque: 407 Nm X-axis travel: 318 mm Z-axis travel: 660 mm Rapid traverse X/Z: 24 m/min Dedpfx Aksy U Huqetokn Tool turret: 12 positions Turret type: BOT (Bolt-On Tooling) Control: Haas CNC Control Hydraulic tailstock Coolant through central system Chip conveyor – optional Machine weight: approx. 4950 kg Machine without powered tools. Possible errors in the description. Sold "as is," without warranty.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, turning length: 2,200 mm, turning diameter: 630 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 350 mm, travel distance Z-axis: 2,330 mm, bar passage: 117 mm, Specifications Chuck diam. 450 mm 11′ Capacity Turning length: 2255 mm 1st Spindle Spindle nose: A2-11 ASA Bar capacity: 117 mm Spindle speed: 10-2000 rpm Motor power: 30/37 Kw C axis: si degrees 1st Turret Motorized turret: 12 Tailstock Cone: 5 CM Maximum swing over bed: 775 mm Maximum turning diameter over carriage: 630 mm Maximum turning diameter over bed: 690 mm SPINDLE Spindle bore diameter: 132 mm Draw tube internal diameter: 117 mm Main spindle motor power: 30/37 kW Number of mechanical speed ranges: 2 Maximum spindle motor torque (continuous / 30 min): 1980 / 2450 Nm Dkodpfx Akjy Uk Eaoten CARRIAGE X-axis travel: 350 mm Z-axis travel: 2330 mm X/Z axis motor power: 7/7 kW Carriage guide inclination: 45° TAILSTOCK Tailstock travel with carriage coupling: 2255 mm Quill diameter: 160 mm Quill travel: 150 mm Maximum quill thrust: 2851 kg Machine dimensions: 6521 × 2154 × 2374 mm

Condition: good (used), Storage location: 3105 Manufacturer: DOOSAN Type: S310 S Machine number: LNJ 1003 Year of manufacture: 1998 Maximum turning diameter: 750 mm Maximum workpiece diameter: mm Dkjdjy T Uyxepfx Aktsn Turning diameter over bed: 350 mm Travel distances x-z: mm Bar capacity: 65 mm Control system: Fanuc O-T Spindle speed range: 4,500 rpm Turret: 12 stations Number of spindles: 2 Equipment: Chip conveyor Power consumption: 4 kW Dimensions: mm Weight: 3.8 t Condition: good

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 950 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, feed length Z-axis: 950 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, workpiece weight (max.): 900 kg, turning diameter over top slide: 400 mm, bar passage: 54 mm, chuck outer diameter: 250 mm, swing diameter over top slide: 400 mm, center height over cross slide: 200 mm, Turning lathe WEILER E35 Year of manufacture: 2001 Control system: Weiler D1 Spindle speed: 1 - 3,000 rpm Chuck diameter: max. 250mm Bar capacity: 54mm Center height: 200mm Djdpfx Ajy T Iptjktskn Distance between centers: 950mm Accessories: Coolant system Various tool holders Chuck jaws The machine was used in a training workshop.

Condition: excellent (used), CNC lathe Hwacheon HI Tech 300 Dkodpfjy Tp E Nsx Aktjn Year 2005 Fanuc 18iTB with Manual Guide 10-inch chuck Spindle bore 79mm Max turning length 800mm Max diameter 380mm Z-axis travel 820 Tailstock Chip conveyor Machine documentation Very good condition

Condition: excellent (used), Year of construction: 2013, 1 MURATEC MW200 CNC lathe Dual spindles, dual turrets Year: 2013 FANUC CNC control Includes: 1 Conveyor 1 Integrated air conditioning system 1 Fume extraction unit 1 tool changer robot Dedpjy Ta N Sjfx Aktokn Supplied with all tooling and tool holders.

Condition: good (used), Year of construction: 2005, 1 CNC lathe with dual spindles and dual turrets, model MW120 from MURATEC, manufactured in 2005, including: 1 Integrated manipulator. Dodpfx Akey Ta Dvetskn

Condition: excellent (used), Year of construction: 1998, CAZENEUVE CT 200 CNC lathe Dkjdpfx Akoy S T N Aoten CNC NUM control Year 1998

Condition: excellent (used), ROSILIO TBI 280 CNC Lathe Numerical control: FAGOR 8055TC-A Year: 2006 Power supply: 400 V Installed power: 15 kVA Weight: 2200 kg Dkodpfxsy S Axyj Akten Machine in good overall condition.

Condition: excellent (used), Year of construction: 2001, DAEWOO PUMA V550M-2S CNC LATHE Brand: Daewoo Model: Puma V550M-2S Type: Vertical CNC Lathe Dodpfoy S Annsx Aktokn Numerical Control: FANUC Series 18-T FEATURES: – Large chuck – Power supply: 200/220V – 3-phase – 50/60Hz – Installed power: 103.8 kVA – Complete machine

Condition: used, Year of construction: 2007, turning length: 530 mm, turning diameter: 360 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, 2-axis CNC lathe Mori Seiki 2050 Dura Turn, Japan Fanuc control! Chuck size: 200 mm / 8 inches Maximum turning diameter: 360 mm Maximum cutting length: 530 mm Bore diameter: 65 mm Spindle power/Maximum spindle speed: 13.5 kW/4000 rpm / 18.1 HP/4000 rpm Spindle type: A2-6 Turret – Number of tools: 12 stations X-axis and speed: 24,000 mm/min / 945 inches/min Z-axis feed rate: 24,000 mm/min / 954 inches/min Included with the machine: -Tailstock -Probe -Part catcher -Chip conveyor -Transformer Dksdpfsy Stfdox Akton -Documentation Machine weight: 3950 kg

Condition: used, Year of construction: 2014, turning diameter 376 mm turning length 760 mm control Fanuc Dksdpfx Aey Sblrskten x-axis 260 mm z-axis 830 mm weight of the machine ca. 6000 kg

Year of construction: 2026, condition: new, functionality: fully functional, DN Solutions PUMA DNT2600M Type: CNC Turning Center (Live Tooling) Control Unit: Fanuc Dsdpfxey R E Ste Aktjkn Chuck Size: 10 Inch with C-Axis Bar Capacity: 81 mm Max. Turning Diameter: 380 mm Max. Turning Length: 610 mm X-Axis Travel: 260 mm Z-Axis Travel: 658–680 mm Spindle Speed: 3500 rpm Spindle Power: 22–26 kW Max. Torque: 327–735 Nm Turret Capacity: 12 Stations Live Tool Speed: 6000 rpm

Condition: used, Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 579 mm, turning length: 510 mm, turning diameter: 356 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, spindle motor power: 15 W, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 10,000 m/min, rapid traverse Z-axis: 30,000 m/min, Used CNC lathe Mori Seiki NL2000Y-500, year 2007, equipped with CNC control Mori Seiki MSX-850III. The machine is complete with Y-axis, interpolated C-axis, 12-position live turret, and tailstock. Main features: • Max turning diameter: Ø 356 mm • Max turning length: 510 mm • Bar capacity: Ø 65 mm • Axis travels X/Y/Z: 260 / +/-50 / 590 mm • Spindle speed: 5,000 rpm • Live tool speed: 6,000 rpm • Spindle power: 11/15 kW • Spindle ASA-A2-6 • Minimum C-axis angle: 0.001° Machine equipped with: • Chip conveyor Dsdpfx Akjy R D Aqstokn • Coolant tank with pumps • Nr. 4 live tool holders (2 radial + 2 axial) • Various fixed tool holders • Automatic tool presetting arm • Manuals, electrical schematics, and CE/EU Declaration