Rental Pumps

Condition: reconditioned (used), BUCHER QX61-200/62 R447-6-D Q18301417 Pd: 125 / 210 / 320 bar Djdpsxlh E Asfx Aghjku Vg: 200 / cm3/U Nr: 100036553

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 100166696, AHLSTAR pump APP43-300 S Centrifugal pump with mounting frame, motor not included. Dedpexg Nxasfx Aghjku

Year of construction: 2025, condition: new, functionality: fully functional, pump capacity: 10,000 l/min, pump power: 37,000 W, In-line single stage high efficiency pump with 37kW 1450rpm motor, 3PH 400/690V, 50Hz. DN200 suction and delivery ports. Working point 80-600 m3/hour at 3.1-1.3 bar. Dedjxgdupjpfx Agheku

Condition: used, functionality: fully functional, * Model: The model number is MG160MB4-42FF300-F1. * Power (P_2): This motor has a power output of 11.0 kW, which is equivalent to about 15 horsepower. * Voltage (U): The motor is designed to operate on two different voltage configurations, likely a delta (Δ) and a star (Y) connection. * For a 50 Hz power supply, it can run on 380-415V with a current of 21.6-20.4A, or 23.8-22.4A at the lower voltage. * For a 60 Hz power supply, it can run on 460-480V with a current of 21.0-17.8A or 23.0-19.6A at the lower voltage. Dkodpoxcf Hrsfx Aghsu * Frequency (Hz): The motor is rated for both 50 Hz and 60 Hz operation, making it suitable for use in various regions worldwide. * Power Factor (cos \phi): The power factor is listed as 0.85-0.84 for 50 Hz and 0.90-0.83 for 60 Hz. This indicates how efficiently the motor uses electrical power. A power factor closer to 1.0 is more efficient. * Efficiency (\eta): The motor's efficiency is specified as 91.0-92.0% at 50 Hz and 97.4-93.0% at 60 Hz. This is a crucial metric, as it shows the percentage of electrical power converted into mechanical power. * Speed: The motor's speed is listed in revolutions per minute (min^{-1}). For 50 Hz, the speed is 1460-1470 min^{-1}, and for 60 Hz, it is 1750-1770 min^{-1}. This confirms it's a 4-pole motor since the speeds are slightly less than the synchronous speeds of 1500 RPM (for 50 Hz) and 1800 RPM (for 60 Hz), which is typical for an induction motor. Other Details The upper nameplate provides more general information: * Serial No.: The unique serial number for this motor is 5496. * Ingress Protection (IP) rating: The motor has an IP55 rating, which means it's protected against dust ingress and low-pressure jets of water from any direction. * Bearings: The bearing types are specified as 6309.C4 (DE, likely "Drive End") and 6309.C4 (NDE, likely "Non-Drive End"). These are standard deep groove ball bearings. * Grease: The recommended grease is UNIREX N3 ESSO. * Protector Type: The motor has a thermal protector, specifically a PTC 160°C TTP211. This protects the motor from overheating. * Weight: The motor's weight is listed as 98 kg.

Condition: excellent (used), For sale: professional fire-fighting portable pump Albert Ziegler FP 8/8 (DIN 14420). The unit is in outstanding technical and visual condition – only 91 operating hours! Key details: • Manufacturer: Albert Ziegler GmbH, Germany • Model: FP 8/8 – Ultra Leicht • Year of manufacture: 1992 • Hours: 91 h (documented with VDO meter) • Engine: Hirth, 2-stroke, air-cooled – proven reliability • Rated capacity: 800 l/min at 8 bar • Rated speed: 4,400 rpm • Original nameplate, fully complete Condition and advantages: • Very low hours • Fully operational • Well-maintained, dry, no modifications • Ideal for volunteer fire brigades, agricultural use (irrigation, pumping), technical services, or as a collector’s item Ready for work The equipment is ready for immediate use. Ziegler portable pumps are synonymous with top quality – durability and reliability proven in hundreds of fire brigades worldwide. Dkedpfx Aoxa Evujgheu

Condition: excellent (used), For sale: Professional Ziegler FP 8/8 Ultra Leicht fire-fighting portable pump (DIN 14420), manufactured in 1997 in Germany. This is a premium-class unit in the Ultra Leicht (Ultra Light) version, designed for easy transport and ergonomic operation. Technical specifications: Dkjdpfxexa Euqo Aghju • Model: FP 8/8 Ultra Leicht • Year of manufacture: 1997 • Rated output: 800 l/min • Rated pressure: 8 bar • Maximum output: 1030–1946 l/min • Rated speed: 4400 rpm • Gear ratio: 1:1 Engine: • 2-cylinder petrol engine, air-cooled • 12V electric starter • Reliable and easy-to-service construction Condition: • Original hour meter: 142 operating hours – very little use • Pump is complete, fully functional, and ready for operation • All gauges, indicator lights, and controls are fully operational • Control panel with operating instructions in German Applications: • Volunteer & professional fire departments – for field or reserve units • Agriculture & industry – fast pumping of large volumes of water • Flood protection, emergency drainage • Firefighting equipment enthusiasts and collectors

Condition: excellent (used), For sale: Original Ziegler FP 8/8 (DIN 14420) portable fire pump with the legendary Volkswagen air-cooled engine – 1192 cm³ displacement, 34 HP. ✅ Key specifications: • Manufacturer: Albert Ziegler Giengen/Brenz (Germany) • Model: FP 8/8 • Year of manufacture: 1974 • Engine: Volkswagen Type 122 – 1.2 petrol, 34 HP at 3600 rpm • Pump capacity: 800 l/min • Head lift: 80 mWS • Rated speed: 4000 rpm • Weight: 190 kg • Gear ratio: 1:1.45 • Operating hours: 16.3 h – practically like new! ✅ Condition & features: • The fire pump is complete and in fully original condition. • Nameplates and markings are intact. • The VW engine starts easily and runs smoothly. • Mobile design, easy to transport. • Ideal for a museum, collection, display, or as a reserve unit for a volunteer fire department. 🔥 Unique – VW Beetle engine in fire service! Volkswagen engines used in Ziegler pumps are highly valued today – reliable, easy to service, and collectible. 📦 Collection in person or transport upon arrangement. Dkjdpexa En Rsfx Aghou

Condition: used, Centrifugal pumps for pumping beer, water or other low-viscosity media. Available in many performance and pressure ranges. Manufacturer: Hilge/Grundfos/KSB/Fristam/Alfa Laval Please let us know your application (medium, capacity, delivery head) and we will find a suitable solution for you. Material: Pump housing and impeller in stainless steel Position: free standing/mounted on base Dsdpfxsw Uvbfs Agheku Features: Connections as flange connection or milk pipe screw connection, optional: self-priming/splash guard/chassis/frequency converter

Condition: used, functionality: fully functional, TECHNICAL SPECIFICATIONS Stainless steel hydraulic pump 350 HL/h (ref. 007499), designed for smooth and constant liquid transfer. Its intermediate capacity ensures a steady flow rate and adaptation to intensive rates. DIMENSIONS Dodjw Uqp Depfx Agheku - Currently being drafted APPENDICES - 6-month warranty - Complies with EC standards

Condition: used, Seepex BTQ progressive cavity pump with square hopper. Last used for conveying spent grain. Additional title: Positive displacement pump Capacity appr.: 960 kg/h wet spent grains Power: 2,2 kW Dksdow Ucyzjpfx Aghou Material: mild steel housing, painted, Position: free-standing on adjustable dome feet Features: Funnel with square connection

Year of construction: 2024, condition: used, Exhibition machine return systemReturn system for edge banding machinesMax. part sizes: 2800 x 1300 mmMax. Part size for 4-sided edging: 1300 x 1300 mm (optional 2400 x 800 mm) Continuous feed from 7 - 20 m/min (optional 30 m/min) Adoption of the edge banding machine's forward stroke speed is possible (0 - 10 V) Electric drives with frequency converter and gear motor Pneumatic lifting function Workpiece detection via sensors Control unit with 3.2" display Height adjustable from 800 - 1000 mm Maximum weight: 60 kg Paint finish RAL 7035 Conveyor belt Conveyor belt for the return transport of the panels Speed of the return conveyor belt: 7-30 m/min Conveyor belt width: 800 mm Roller conveyor Slightly inclined adjustable roller conveyor with plastic rollers and stop for installation after the dryer as an outfeed station for the returned panels Conveyor belt width: 800 mm Variant 3 for left-hand running edge banding machine Incl. packaging A… Length of edge banding machine 4800mm – 5300mm B… Length of return conveyor belt 3000mm C… Length of roller conveyor 2500mm Roller track 1-lane with RTS Compact conveyor system extension. Addition of an additional free-standing roller track as well as a roller conveyor and lifting unit to support large parts. Using adjustable pivot points, the panels are rotated after transfer and returned almost straight via the return conveyor belt. Pneumatically controlled top pressure. Part lengths: 300 - 2400mm Part widths: 200 - 800mm Panel thickness: 8 - 35mm (panels must be inherently stable) These part sizes are recommended by Barbaric. Parts with deviating dimensions may not be functional and can cause problems. Increasing the panel length with end-face edging can lead to a risk of crushing on system components as well as on-site objects or hall columns. Ergonomics package RTS Compact Stk Ergonomics package RTS Compact consisting of a lifting table and measuring devices. Lifting table: 1960 x 960 mm. Dimensions of the blowing table: 960 x 760 mm. Steel construction with attached air cushion table with blowing nozzles for easy lifting. Table can be pneumatically lifted. Djdjw Sy Tmspfx Aghsku Storage location: Garbsen

Condition: ready for operation (used), A dosing pump (ointment pump) Viscotec for highly viscous liquids is available. Dosing range: 1µl-1l, dosing precision: +/-1%, repeat accuracy: over 99%, flow range: 0.2ml-700ml/min. Including control system and spare parts package. An on-site inspection is possible. Dkjdpfxsw R Uzpe Aghsu

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, pressure: 6 bar, 3 units Netzsch Nemo progressive cavity pumps. Shaft stainless steel. Housing steel. These refurbished standby machines come from the spare parts warehouse. They were intended for the delivery of calcium hydroxide suspension. Images are in order from left to right: 1. Photos 1-9 Green pump on the left NM 038BY02S12B (new, unused) 2. Photos 10-18 Grey pump in the middle NM 045BY01S08B (refurbished) 3. Photos 19-26 Blue pump on the right NM 038 BY (refurbished) Djdpfx Agsw I Hniehsku

Condition: excellent (used), Year of construction: 2001, operating hours: 16 h, For sale: High-performance Ziegler Ultra Leicht fire-fighting motor pump, powered by a Gobler-Hirth 625 cm³ engine. This German-made unit has only 16 operating hours – perfect for volunteer fire brigades, industrial applications, agriculture, or as a reliable emergency backup. Technical specifications: • Manufacturer: Albert Ziegler GmbH & Co. KG (Germany) • Model: ULTRA LEICHT FP 8/8 • Year of manufacture: 2001 • Engine: Göbler-Hirth 3201 A03, 625 cm³ • Power output: 36 kW / 49 HP Dsdow E Nbzspfx Aghsku • RPM: 5,000 min⁻¹ • Operating hours: 16 h • Fuel: petrol, manual fuel pump • Starting system: manual + electric starter. • Compact and lightweight design (easy to transport and operate) Equipment & condition: • 2 pressure gauges on the front panel • Control panel with safety features and indicator lights • Ready for immediate use • Engine and pump run smoothly and flawlessly • Sourced from a public fire department, professionally serviced. Why choose this pump? • Extremely low hours – practically like new • Top-tier German quality – Ziegler is a world leader in fire-fighting equipment • Ideal for intensive use or as a standby reserve • Capable of operating in demanding conditions (rough terrain, floods, disasters)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 133106 & 133312, New material feeder, system Pailfeed PF803, year of manufacture 2024, unused, including control unit DS 503. Designed for reliable, clean, and bubble-free conveying of medium- to high-viscosity single-component materials from a container. Dispense module not included! Two units available. Please specify the desired quantity with your offer. Optional accessories such as UV-curing devices are offered separately. Supplier: Dr. Hönle AG. --- Please quote your price offer. Sale only within Europe (EU), including Turkey, Great Britain, and Switzerland. --- Technical specifications can be found in the handout. Dsdpfx Agow Dd Rzshoku Supplied without packaging; all warranty rights are excluded. Should you wish to dismantle the system yourself, please note this in your offer. We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: NM038BY, input voltage: 400 V, Equipment: documentation/manual, NETZCH screw pump in FDA execution (for the food industry), NORD gear motor 1.5kW 160rpm, DN65 PN16 connections, stainless steel housing, NEMOLAST S46 (EPDM) stator – suitable for pumping distillery mash – 2 units available. Dkedpswz Nkzofx Aghju

Condition: ready for operation (used), Three Grundfos multistage high-pressure centrifugal pumps are available. 1) Grundfos CR8 100 A-A-A-AUUE, max. pumped material temperature: 120°C (150°C), speed: 2900 rpm, flow rate: 11m³/h, delivery head: 100m, machine diameter and height: 180mm/600mm, weight: approx. 55kg. 2) Grundfos CR 16-30 A-F-A-BUBE, flow rate: 16m³/h, max. delivery head: 34.4m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/800mm, weight: approx. 60kg. 3) Grundfos CRV2-150 A-O-6-BUBE, flow rate: 2.5m³/h, max. delivery head: 92.2m, speed: 2900rpm, max. operating pressure: 16bar, max. pumped material temperature: 120°C, machine dimensions X/Y/Z: approx. 300mm/200mm/400mm, weight: approx. 60kg. Documentation available. On-site inspection is possible. Dkjdpfxewzx Txo Aghju

Condition: excellent (used), SCA Air driven piston pump Max. Temp. 100 °C Material pressure 350 bar Dsdpfx Aewxw U Ajghsku Dimensions: 1050 x 650 x 2000 mm Further items - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), SCA Air driven piston pump Max. Temp. 100 °C Dsdpowxw R Rofx Aghsku Material pressure 350 bar You can find more items - new and used - in our store! International shipping costs on request!

Year of construction: 2019, condition: ready for operation (used), A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible. Dkedpfxewtg Hqo Aghou

Condition: used, Storage location: Nattheim Dkodpfx Agjwm Ranshju

Condition: used, Storage location: Nattheim Dkedpowm Rahofx Agheu

Condition: excellent (used), functionality: fully functional, Scheugenpflug Casting Resin Dosing Technology Resin Preparation and Dosing Station, Casting System for Self-Leveling Casting Media, DOS A300, DKM050 Model: DOSA300 Type: DKM050 Year of Manufacture: 02/2007 Dkedpfx Agewlqupjheu Technical Specifications: Voltage: 400V AC Current: 16A Frequency: 50Hz Rated Power: 6.4kW Compressed Air: 6bar Equipment: Material Tank A - 20l Material Tank B - 10l Display KWS100 Accessories/Spare Parts Package: Additional Material Tank 3MTC06281 10l (new), Year of Manufacture 2023 Additional Double Piston Pump 127cc (reconditioned 2023) Additional Component Mixing Unit Additional Heating Unit KWS P/UVK/A 2HZG00180 - 230V, 125W Contamination: The system still contains residual material: Wepuran VU4452/61HE casting compound from Peters; the system is operating in standby mode.

Condition: used, TECHNICAL SPECIFICATIONS - Marc pump - Pig tail - Make : PERA Dsdpfx Aowk D Sfeghoku - Capacity : 40 T/H

Condition: used, functionality: unexamined, lot consisting of 2 pcs IL50/170-1.1/4 centrigugal pumps and 4 pcs IL32/160-3/2 Dksdpswivyfjfx Aghou they were running until decommissioning