Hot pressOtt
Hot press
Ott
EXW ONO plus VAT
€33,614
Condition
Used
Location
Castrop-Rauxel 

Price & Location
EXW ONO plus VAT
€33,614
- Location:
- Castrop-Rauxel, Germany

Call
Technical details
Dimensions and weight
Total length:
3,000 mm
Total width:
2,500 mm
Total height:
2,160 mm
Fluid power system
Operating pressure:
350 bar
Power details
Input voltage:
400 V
Input frequency:
50 Hz
Input current:
50 A
Type of input current:
three-phase
Details about the offer
- Listing ID:
- A233-46404
- Update:
- 17.11.2026
Description
OTT Hot Press – Modernized Veneer Press, Converted for CFRP and Prepreg Manufacturing
For sale is a modernized OTT veneer press, which has been extensively converted into a high-performance hot press for CFRP manufacturing.
The press has been technically modernized and equipped with a new, PLC-controlled heating and temperature control system. It is particularly suitable for the processing of CFRP prepregs as well as for applications with heated aluminum dies.
Through freely programmable temperature profiles, multi-stage heating ramps, and additional measuring options for direct temperature monitoring in the workpiece, the system offers high flexibility for different manufacturing processes.
Another special feature is the additional controllable pneumatic system with an operating pressure of up to 30 bar. This allows an internal pressure to be built up in hollow-body components during the pressing process. This opens up additional possibilities in the production of complex CFRP components.
Technical data
- Manufacturer: OTT
- Machine type: Modernized veneer press / hot press
- Press area: 2,250 x 750 mm
- Total pressure: 100 tons
- Hydraulic pressure: 350 bar
- Hydraulics: 4 cylinders, each with a diameter of 100 mm
- Cylinders: Overhauled and newly sealed by a specialist company
- Control: Siemens PLC S7-1200 G2
- Maximum operating temperature: 180 °C
- Heating rate: up to 4 K/min
- Additional pneumatic system: Controllable, up to 30 bar operating pressure
Heating system and temperature control
The press features new, PLC-controlled heating plates from Busse.
Equipment:
- 4 heating elements in the heating plates (2 top, 2 bottom)
- 4 temperature sensors for monitoring the heating plates
- 8 PLC-controlled outputs for additional heating cartridges
- 8 slots for temperature sensors of the additional heating cartridges
- 2 additional sensors for direct temperature monitoring in the workpiece
Pneumatic system for hollow-body components
In addition, the press is equipped with a controllable pneumatic system that allows an operating pressure of up to 30 bar.
During the pressing process, a defined internal pressure can be applied to hollow-body components.
Particularly interesting for:
- Production of CFRP hollow-body components
- Processing of prepregs with internal pressurization
- Complex fiber composite structures
- Special forming processes in the composite field
Control and process control
The temperature control is carried out via a Siemens PLC S7-1200 G2.
The following process parameters can be individually set and programmed:
- Heating rate
- Multi-stage heating ramps
- Start temperature
- End temperature
- Holding temperature at the end of the cycle
Iedpo Aktifjfx Afuobd
- Pre-programming and storage of different program cycles
This allows different temperature profiles to be implemented for different materials and manufacturing processes.
Possible applications
The press has been specifically optimized for use in CFRP manufacturing.
Particularly suitable for:
- CFRP prepreg processing
- Production of fiber composite components
- Production of CFRP hollow-body components with internal pressurization
- Processing of prepregs in heated aluminum dies
- Trial and prototype manufacturing
- Other applications in the field of heated molding
The listing was translated automatically. Translation errors are possible.
For sale is a modernized OTT veneer press, which has been extensively converted into a high-performance hot press for CFRP manufacturing.
The press has been technically modernized and equipped with a new, PLC-controlled heating and temperature control system. It is particularly suitable for the processing of CFRP prepregs as well as for applications with heated aluminum dies.
Through freely programmable temperature profiles, multi-stage heating ramps, and additional measuring options for direct temperature monitoring in the workpiece, the system offers high flexibility for different manufacturing processes.
Another special feature is the additional controllable pneumatic system with an operating pressure of up to 30 bar. This allows an internal pressure to be built up in hollow-body components during the pressing process. This opens up additional possibilities in the production of complex CFRP components.
Technical data
- Manufacturer: OTT
- Machine type: Modernized veneer press / hot press
- Press area: 2,250 x 750 mm
- Total pressure: 100 tons
- Hydraulic pressure: 350 bar
- Hydraulics: 4 cylinders, each with a diameter of 100 mm
- Cylinders: Overhauled and newly sealed by a specialist company
- Control: Siemens PLC S7-1200 G2
- Maximum operating temperature: 180 °C
- Heating rate: up to 4 K/min
- Additional pneumatic system: Controllable, up to 30 bar operating pressure
Heating system and temperature control
The press features new, PLC-controlled heating plates from Busse.
Equipment:
- 4 heating elements in the heating plates (2 top, 2 bottom)
- 4 temperature sensors for monitoring the heating plates
- 8 PLC-controlled outputs for additional heating cartridges
- 8 slots for temperature sensors of the additional heating cartridges
- 2 additional sensors for direct temperature monitoring in the workpiece
Pneumatic system for hollow-body components
In addition, the press is equipped with a controllable pneumatic system that allows an operating pressure of up to 30 bar.
During the pressing process, a defined internal pressure can be applied to hollow-body components.
Particularly interesting for:
- Production of CFRP hollow-body components
- Processing of prepregs with internal pressurization
- Complex fiber composite structures
- Special forming processes in the composite field
Control and process control
The temperature control is carried out via a Siemens PLC S7-1200 G2.
The following process parameters can be individually set and programmed:
- Heating rate
- Multi-stage heating ramps
- Start temperature
- End temperature
- Holding temperature at the end of the cycle
Iedpo Aktifjfx Afuobd
- Pre-programming and storage of different program cycles
This allows different temperature profiles to be implemented for different materials and manufacturing processes.
Possible applications
The press has been specifically optimized for use in CFRP manufacturing.
Particularly suitable for:
- CFRP prepreg processing
- Production of fiber composite components
- Production of CFRP hollow-body components with internal pressurization
- Processing of prepregs in heated aluminum dies
- Trial and prototype manufacturing
- Other applications in the field of heated molding
The listing was translated automatically. Translation errors are possible.
Seller
Note: Register for free or log in, to access all information.
Last online: Yesterday
Registered since: 2025
1 listing online
Send inquiry
Telephone & Fax
+49 1573 ... show
These listings may also fit your interest.
Success:
Your message has been sent.
Listing
Spatenhof
8,439 km
Edgebander
OttTornado FÜ + PU
OttTornado FÜ + PU
Success:
Your message has been sent.
Listing
Sveti Jurij ob Ščavnici
8,506 km
Edgebander
OttPacific V6-F
OttPacific V6-F
Success:
Your message has been sent.
Listing
Wioska
8,118 km
Veneer press OTT JU 60-S
OttJunior JU 60 S
OttJunior JU 60 S
Success:
Your message has been sent.
Listing
Gerolzhofen
7,947 km
Edge banding machine
OTTKantomat K55
OTTKantomat K55
Success:
Your message has been sent.
Listing
Gerolzhofen
7,947 km
Edge banding machine
OttKantomat 156-FÜ
OttKantomat 156-FÜ
Success:
Your message has been sent.
Listing
Reichertshofen
8,098 km
Wide belt sander
OttOmega 1100
OttOmega 1100
Success:
Your message has been sent.
Listing
Röllbach
7,891 km
Veneer press
OTTSTABIL 3013/135
OTTSTABIL 3013/135
Success:
Your message has been sent.
Listing
Gronau (Westfalen)
7,613 km
Edgebander
OttTopEdge DUO
OttTopEdge DUO
Success:
Your message has been sent.
Listing
Michelstadt
7,884 km
Edgebander
OttTornado Top
OttTornado Top
Success:
Your message has been sent.
Listing
Spatenhof
8,439 km
Edgebander
OttTornado TOP
OttTornado TOP
Your listing has been deleted successfully
An error has occurred






































































































