Jlp Eood

Condition: used, Year of construction: 2017, operating hours: 5,872 h, lifting height: 3,030 mm, fuel type: electric, mast type: duplex, fork length: 1,040 mm, fork width: 920 mm, total height: 2,060 mm, total length: 2,030 mm, total width: 1,090 mm, color: silver, Empty weight: 3.100 kg Lifting capacity: 1.600 kg - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516212H00086 - Operating hours: 5872 - Lifting capacity: 1600kg - Lifting height: 3030mm - Overhead clearance: 2060mm - Free lift: 0mm - Fork length: 1040mm Iiedjy S Rrzepfx Ab Nob - Maximum fork width: 920mm - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Heating, Full cabin, Joystick, Work lights, Non-marking tires - Mast: Duplex - Drive: Electric - Brand/Type: 05 EPZS 625 SC - Battery year of construction: 2021 - Capacity: 625Ah - Battery voltage: 48V - Transport dimensions: 2037mm x 1099mm x 2060mm (l x w x h) - Transport weight [kg]: 3100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, empty load weight: 50,800 kg, year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Iiodpfxoy S Rrus Ab Neb Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: good (used), Year of construction: 1994, functionality: fully functional, Control system for Traub TX8F, Turret, Tailstock, Chuck jaws, Isdpfjy S Rrnox Ab Noib Chip conveyor, Manuals.

Condition: used, Year of construction: 2008, Manufacturer: Haarslev Model: HFMI2000 / HF300GH Iiodpjy S Rrhsfx Ab Neb Year: 2008 Condition: Used Serial number: 305649 Stock number: 3366 Mixer: double paddle mixer Capacity: 2000 liters Plate diameter: 300 mm Infeed height: 2850 mm Discharge height: 950 mm Compressed air: 6 - 8 Bar Power: 3 x 400V, 50Hz, 88kW Dimensions: 4950 x 3550 x 3550 mm Mixer cooled with nitrogen injection. Haarslev HF10 product hopper of 2000 liters with ribbon mixer and 11kW pump. Haarslev HF300GH 300mm mincer head of 55kW. Includes two accessory carts.

Condition: used, Year of construction: 2008, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Iisdpfxsy S Rrbs Ab Nob Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Condition: used, Year of construction: 2000, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal miter range: 45° - 90° - 25° Vertical miter range: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Iisdpfoy S Rq Rex Ab Nob Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Feed brake: yes Machine length: Machine width: Weight: 300 kg

Condition: used, Slider length: 2500 mm Cutting width at the fence: 1000 mm Cutting width at the rip fence: 2800 mm Cutting depth: 120 mm Scoring saw: no Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Fence adjustment: manual Saw blade angle display: scale Cutting height display: - Fence display: scale Rip fence scale: scale Saw blade diameter: max. 400 mm Speeds: 2800 / 4000 / 5500 Motor power: 5.5 kW Dust extraction port: 120 mm Machine length: 3000 mm Machine width: 1800 mm Iiodpey S Rq Defx Ab Nsb Weight: approx. 1300 kg

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2025, volume flow: 750 m³/h, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with ruffler, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Iedpfx Abey S Rqwj Noib Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, power: 110 kW (149.56 HP), pressing force: 1,600 t, stroke length: 400 mm, table width: 1,600 mm, table length: 1,600 mm, distance table to ram: 870 mm, overall weight: 141,500 kg, Manufactured by Voronezh plant (Russia) Iodpey S Rqqjfx Ab Njib Year of manufacture 1985 Capacity, ton 1600 Slider stroke, mm 400 Strokes per minute 16 Table size, mm 1600 x 1600 Ram dimensions, mm 1600 x 1600 Slider adjustment, mm 220 Max distance between table and slider, mm 870 Slider ejector capacity, ton 80 Slider ejector stroke, mm 100 Motor capacity, kW 110 Press dimensions, mm 4670 x 4370 x 8110 Press weight, kg 141500 1600 ton single–crank mechanical press K04.150.242. Robust closed-type design, suitable for large dies and high-force sheet metal operations. This press is in excellent condition.

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, turning diameter over cross slide: 610 mm, spindle bore: 130 mm, turning diameter: 1,000 mm, center height: 500 mm, turning length: 3,000 mm, quill diameter: 160 mm, quill travel distance: 300 mm, total length: 6,350 mm, total width: 2,190 mm, total height: 1,810 mm, spindle speed (max.): 315 rpm, spindle speed (min.): 3 rpm, swing diameter over cross slide: 610 mm, metric thread diameter (min.): 1 mm, metric thread diameter (max.): 120 mm, metric thread steps: 44, bed width: 755 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, Maximum turning diameter: 500 mm Distance between centers: 3000 mm Bed width: 755 mm Diameter of swing over bed: 1000 mm Diameter of swing over carriage: 610 mm Spindle bore: 130 mm Spindle nose: D1-15/Short taper 15 Spindle speed range: 3.15 - 315 rpm (21 steps) Longitudinal feed range: 0.1 - 12 mm/rev, 57 steps Cross feed range: 0.05 - 6 mm/rev, 57 steps Rapid traverse rate longitudinal/cross: 3700/1850 mm/min Metric threads: 1 - 120 mm, 44 steps Inch threads: 3/8 - 28 TPI, 31 steps Iiodpfx Ajy S Rqdeb Njb Module threads: 0.5 - 60 mm, 45 steps Diametral threads: 1 - 56 DP, 38 steps Tailstock quill diameter: 160 mm Quill mounting: MK 6 Quill travel: 300 mm Motor power: 22 kW Weight: 14,400.00 kg Dimensions: 6350 x 2190 x 1810 mm

Condition: good (used), Year of construction: 2005, functionality: fully functional, Toyoda FH 550, Year of manufacture 2005, Fanuc 31i MA control system, Travel range X/Y/Z 750/800/850 mm, Pallet size 550 x 500 mm, Iijdpfxjy S Rp To Ab Neb Spindle speed up to 15,000 rpm, 60-tool automatic tool changer, BT 40, Coolant system, 70 bar, Chip conveyor.

Condition: used, The Roversi butter churn 800 litres is a large-scale butter churn designed for industrial use, particularly in dairy processing facilities or large-scale butter production operations. Here are some general features and information about such a butter churn: - Capacity: The churn is designed to handle up to 800 litres of cream at a time, making it suitable for large batches of butter production. - Construction: Typically made from high-quality stainless steel, which ensures hygiene, durability, and easy cleaning. This material is resistant to corrosion and is ideal for food processing equipment. - Design: Roversi churns often feature a modern design with user-friendly controls. They may include options for automatic or manual operation, depending on the model. - Performance: These churns are engineered for efficient butter production, enabling quick turnover of cream to butter, which is essential for commercial operations. - Applications: Suitable for dairy farms, creameries, and food manufacturers who require an efficient method for butter production. - Efficiency: Operating at optimal speeds and times ensures that the cream is churned properly, resulting in high-quality butter with desired texture and flavor. - Features: Some models may include features such as temperature control, agitator speed adjustment, and safety mechanisms. Capacity: 800 / 1000 Litres Cream Capacity: 500 Litres Butter Outlet : 250-300 kg per batch Minimum Cream Capacity: 100 litres Electrical Requirements: 3 Phase 50/60 hz Iedpfxsy S Rpte Ab Noib Internal Kneaders: Equipped with Internal Kneaders Jacket Constriction: Double Jacket Stainless steel Gears: Slow speed with kneading process and Fast speed for cream to be turned in to butter Construction: Stainless steel Barrel with steal frame with new paint job Gear activation: Gearbox Available: Immediately

Condition: excellent (used), Track width: 25 cm. Cutting height: 10 cm. Engine: 22 kW. Ready for operation. Iiedpfx Ajy S Rpmsb Nsb

Condition: new, NEW! flaker for frozen products (fish, meat, vegetables, etc...) electrical power : 9,5 kW dimensions of the machine (l x w x h) : ± 2.100 x 1.070 x 1.150 mm capacity : ± 2.500 kg / h Iisdpey S Rpgjfx Ab Nsb for blocks of max. ± 470 X 600 X 200 mm 3 x 400 V

Condition: used, all stainless steel nett width 600 mm Iijdpfxoy S Rpaj Ab Nsb 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt Iiodpfoy S Rn Aex Ab Neb outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: used, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Suitable for nozzles of max. 40 mm diameter. Iijdpfx Abey S Rnvj Nob Width belt: 400 mm Product temperature up to ± 80 °C With universal connection With pneumatique knife 6 exits With support frame in height adjustable

Condition: excellent (used), Working width 1300 mm, 2-roller system, roller shoe, 15 kW, 11 kW, infinitely variable feed rate, dust extraction port 250 mm. Isdsy S Rnpepfx Ab Neib

Condition: good (used), Mounting plate, scribing plate, measuring plate, measuring table, leveling plate, scribing plate -Mounting plate: Straightening plate with support ribs and adjustable feet -Length: 3000 mm -Width: 1250 mm -Sheet thickness: 48 mm -Adjustable feet: Ø 300 x 670 mm Ijdoy S Rniepfx Ab Nsib -Transport dimensions: 3000/1255/H900 mm -Weight: 3500 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 174 h, power: 12 kW (16.32 HP), lifting height: 16,000 mm, fuel type: electric, color: other, General information Year of manufacture: 2021 Technical information Drive: Wheel Empty weight: 8.400 kg Dimensions (LxBxH): 496 x 235 x 315 cm Functional Lifting capacity: 750 kg Working height: 1.800 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Damages: none = Additional options and accessories = - Non marking tires - Support legs = Remarks = General Country of production: Frankrijk Condition Overhauled: × Ijdpjy S Rmlsfx Ab Nsib XL platform, 2 x extendable, Non-marking tires, Fully electric

Condition: not inspected (used), Year of construction: 1993, functionality: unexamined, machine/vehicle number: 121.23.90.02.0493, input voltage: 380 V, Equipment: documentation/manual, Lisec filling station A1RL. Isdpfxjy S Rl Uo Ab Nsib

Condition: good (used), Three-phase motor, electric motor Iisdey S Rl Iopfx Ab Njb -Manufacturer: Kracht, electric motor type MD 90-75 -Power: 1.1 kW -Speed: 1410 rpm -Shaft: Ø 16 x 18 mm -Dimensions: 305/230/H190 mm -Weight: 15.3 kg

Condition: good (used), Year of construction: 2014, 383 USED MIWE Roll In 60/80 rotary rack oven. EXTERNAL DIMENSIONS (in cm): -W: 155, Iijdjy S Rluopfx Ab Nsb -D: 181 (with hood: 230), -H: 265. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), Year of construction: 2014, operating hours: 100 h, functionality: fully functional, machine/vehicle number: V-1225, rotational speed (max.): 1,500 rpm, volume flow: 75,600 m³/h, pressing: 13,291 Pa, power: 350 kW (475.87 HP), Fan for sale. Iedpjy S Rlnefx Ab Njib Very few operating hours, as it was only used as a backup.

Condition: ready for operation (used), functionality: fully functional, HANDTMANN VF 80 – straight filling, portioning, and twisting. Hopper volume: 80 liters; Capacity: up to 3000 kg/hour; Portioning and twisting: up to 420 portions/minute. Iiedpfx Abey S Rk Rj Nob