Auto Lux

Condition: new, power: 335 kW (455.47 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 41,000 kg, empty load weight: 15,352 kg, maximum load weight: 25,648 kg, axle configuration: 8x4, number of seats: 2, next inspection (TÜV): 07/2026, emission class: euro6, brakes: engine braking, suspension: steel, loading space length: 5,800 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, driver cabin: day cab, wheelbase: 4,550 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, Mtlg. house, 1x comfort seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, fog lights, rotating beacon, leaf springs, on-board system left, aluminum tank, 2 axles with pre-steering, roll tarpaulin, lashing eyes, U-protection, chute, roof hatch, green environmental sticker Fodoxmtanspfx Afpjgh Wheelbase: 4550 mm Body: Meiller 3-way tipping body (reinforced) with roll tarpaulin and on-board system left. 9t front axle, rear axle planetary 13.4t (springs 2x16t) crown gear 233, electronic braking system with ABS and ASR, ABS can be switched off, drum brakes front and rear axle, electronic parking brake, condensate monitoring for compressed air system, stabilizer rear axle, smoker's package, residual heat utilization, construction site filter, ClassicSpace, comfort locking system, light and rain sensor, off-road driving program, Mercedes PowerShift 3, MultimediaCockpit Interactive, preparation for toll collection, LED daytime running lights, cornering lights, protective plate under bumper, transmission oil cooling, Meiller 9-piston pump type 296/54, auxiliary drive MB 131-2c pump. New vehicle from stock with daily registration on August 16, 2023! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: good (used), power: 317 kW (431.00 HP), fuel type: diesel, Year of construction: 2012, operating hours: 11,290 h, Equipment: air conditioning, Empty weight: 52.200 kg Fodpfx Afsxmtabopjgh Make of engine: CAT CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: BE Please contact Nedtrax B.V. for more information Caterpillar 349 E CE Year: 2012 Reading hours: 11290h Weight: 52200KG 317kw CAT ACERT Made in belgium Mono boom U/C: 80% good Original paint Airco/klima Camera Hammer line Extra hydraulic lines CE-MARKED In good condition

Condition: excellent (used), Year of construction: 2015, - Travel X=3000 mm, Y=1500 mm, Z=1400 mm Fjdpfx Afexmr Uwepogh - Heidenhain iTNC 530 with handwheel HR 410 - NC rotary table for multi-sided machining 1600 mm x 1250 mm - 1-axis NC universal drilling and milling head, for simultaneous and positioning positioning operation (A-axis, 45°-axis) - Motor spindle 7,000 rpm max. SK 50, 530 Nm spindle torque - Tool changing system SK 50 / 40 places for 400 mm long tools tools - Chip screws in X-axis, optimum chip transport - Chip conveyor (hinged belt conveyor) for transverse conveying, Fabr. Knoll, front ejection - Coolant supply 950 l, made by Knoll - Outside/inside air at the spindle - IKZ 60 bar for deep hole machining - Operating mode 4 - Full enclosure with safety glass panes with sliding doors, optimized for crane loading - Split sliding doors on the front side - Split sliding doors on the operator side - RMP 60 radio measuring probe - incl. washing gun - Short delivery time by arrangement, subject to prior sale - Used machine - Z-axis KGT renewed in September 2023 incl. bearings - Optional fixators and tie rods - optional commissioning/installation - optional transportation

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators Fedpfx Aexmr Uqofpjgh • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, HDC3000 with 6 axes • Travel distances X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel • NC rotary table for 5-sided machining, 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation • Spindle 10,000 rpm, HSK100, S1=220 Nm spindle torque • Tool changer system HSK100 / 60 positions – for tools up to 800 mm length • Chip conveyor • Optimized for 5-sided machining including deep-hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole drilling • Fully enclosed machine • Large interference circle 2800 mm Fgodpfjxmr T Tox Afpeh • Includes washing gun • Short delivery time, subject to prior sale

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 3589720, Equipment: chip conveyor, rotational speed infinitely variable, - 80 bar high-pressure pump - Spindle speed: 20,000 rpm Fodpfx Aoxmr T Hofpsgh - 38,237 operating hours - 10,169 spindle hours (a new spindle was installed at the beginning of the year) - The Y-axis is also new - A laser bridge from Blum - Magazine capacity: 60 tool stations - and Renishaw OMP 60 3D probe

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: Fgsdpfx Afoxmr Tyepsh - Dry wall with extraction system and filters - Mechanical conveyor for painted parts with hooks (modular construction, adjustable to the room) - WAGNER painting unit The paint shop was used for painting window frames.

Condition: used, mileage: 90,717 km, power: 84 kW (114.21 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,259 mm, overall weight: 3,000 kg, first registration: 05/2020, emission class: euro6, color: black, driver cabin: other, number of seats: 3, Year of construction: 2020, fuel: diesel, Equipment: ABS, airbag, sliding door, soot filter, LA2 Headlight Assistant, JG0 Shift Point Indicator, JA8 Crosswind Assist, MJ8 ECO Start-Stop Function, J65 Outside Temperature Display, F68 Exterior Mirrors Heated and Electrically Adjustable, T77 Entry Grab Handle on Sliding Load Compartment Door at Partition, T16 Sliding Door Right Side, SA5 Driver Airbag, ER0 Radio Preparation, S23 Twin Passenger Seat, S22 Armrest for Driver’s Seat, S02 Driver’s Seat, D50 Full Partition, IL5 Left-Hand Drive, RR0 Low Rolling Resistance Tyres, RS3 Steel Wheels 6.5 J x 16, H20 All-Around Heat-Insulating Glass, LE1 Adaptive Brake Light, IT3 3.0 Tonne GVW, GE9 6-Speed Manual Transmission, K1D WLTP Emission Generation, KP6 SCR Emission Control Generation 3, FF5 Overhead Storage Above Windscreen, FJ4 Storage Compartment Under Dashboard, IC1 Model Series C907 / C910 Sprinter, IF0 Model Series C910 VS30 FWD, RN5 Tyres 225/65 R16 C, T86 Entry Handle at Rear Right Corner Pillar, E57 Trailer Socket Pre-Wiring, MR6 Emissions Standard Euro 6c N1, QB1 Vehicle Preparation for Trailer Load up to 2000 kg, Z4V Manufactured in Düsseldorf, XM1 Noise Reduction Measures, X3G Weight Variant 3,000 kg, J58 Seatbelt Reminder for Driver’s Seat, K12 65-Litre Main Tank, ZM0 Panel Van, HI1 Climate Zone 1 (Cold/Comfort), IK0 Complete Vehicle, Z2E Country Version EU - EFTA - UK, Q11 Longitudinal Frame Reinforcement, XO9 Mercedes-Benz MobiloVan with DSB and GgD, MI1 Engine OM 651 DE 22 LA 84 kW (114 hp) 3800 rpm, IS2 Wheelbase 3,259 mm, XU1 Signs / Manuals in German, SK2 Driver’s Seat Occupancy Detection, IG4 Standard, JI6 Initial Run Maintenance Interval 40,000 km, VF7 'Maturin' Black Fabric, J10 Speedometer km/h, ED4 Fleece Battery 12 V 92 Ah, E7A Digital Radio (DAB) Pre-Wiring, JH6 Pre-Equipment for Communication Module for Digital Services (LTE), Z9W WORKER, Z1N N1 Registration, X30 Registration Certificate Part II, XN9 Model Year Change U9-II. Note: Despite careful verification of all our price listings, errors can still occur. Some may result from transmission errors within the systems of various platform providers. However, our own mistakes cannot be ruled out either. Therefore, please note that all information provided is without guarantee and does not constitute a legal claim. Price listings also cannot be declared as a contractual component. If you place particular value on a specific feature in our advertisement, please inform us at the time of contract conclusion. We thank you for your understanding! Fjdpfoxmr Ttsx Afpegh

Condition: used, mileage: 20,000 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,665 mm, overall weight: 3,500 kg, first registration: 01/2024, emission class: euro6, color: white, driver cabin: other, number of seats: 3, Year of construction: 2023, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, onboard computer, parking sensors, seat heater, sliding door, trailer coupling, JB7 Parking package with rear view camera, Q22 Trailer coupling, fixed ball head, H15 Seat heating for front passenger, H16 Seat heating for driver, W54 Rear doors, double-wing, opening to the side wall, E07 Hill start assist, LA2 Headlight assistant, JG0 Shift point indicator, JA8 Crosswind assistant, MJ8 ECO start-stop function, XY4 Model year 4, J65 Outside temperature display, C6L Multifunction steering wheel, JK5 Instrument cluster with color display, MS1 Cruise control, JF1 Rain sensor, F68 Exterior mirrors heated and electrically adjustable, T77 Grab handle for loading area sliding door on partition, T16 Sliding door right, IR4 Wheelbase 3665 mm, SA5 Driver airbag, SA6 Passenger airbag, E1D Digital radio (DAB), S23 Two-seater passenger seat, AR2 Axle ratio i = 3.923, S22 Armrest for driver's seat, S78 Grab handle for Interior seat for two-seater, SB1 comfort driver's seat, SE5 lumbar support driver's seat, D03 high roof, D50 continuous partition, IL5 left-hand drive, R87 spare wheel, RS3 steel wheels 6.5 J x 16, L65 ceiling light(s) LD/FG compartment with door contact, FF4 storage compartment above roof panel, LE1 adaptive brake light, BA3 active brake assist, FZ5 burglar and theft alarm system, LG7 LED high-performance headlights, EY5 Mercedes-Benz emergency call system, IT4 3.5-tonner, GD8 6-speed manual transmission ECO Gear, FF5 storage compartment above windscreen, FJ4 storage compartment under cockpit, 804 AEJ X3/1, XM4 acoustic package, E43 13-pin trailer socket, S28 armrest, driver and passenger door, IE0 series C907 VS30 RWD, T86 Entry handle on rear right corner pillar, M72 HVO-compatible vehicle, M60 14 V/250 A generator, XM1 noise control measures, J55 passenger seat belt reminder, J58 driver seat belt reminder, HH9 semi-automatic TEMPMATIC air conditioning system, K13 71-liter main tank, L22 partial LED taillights, V43 wooden floor, Y43 hydraulic jack, VA2 cargo area interior trim up to roof height (wood), ZM0 panel van, FJ1 folding lid for storage compartment, HI1 climate zone 1 (cold/comfort), LC4 comfort overhead control unit, JH3 communication module (LTE) for digital services, CN2 body-colored grille frame, ES5 instrument panel charging package, LC2 LED light strip in cargo area, CL2 leather-trimmed steering wheel and leather gearshift lever, V95 cable duct on rear portal, V94 cable duct on side wall, IG4 standard Note Fgjdpfexmr Tmex Afpsh Despite Despite careful review of all our pricing, errors do occur from time to time. These are sometimes caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Furthermore, pricing cannot be declared as part of the contract. If you attach particular importance to a specific feature of our listing, please let us know when concluding the contract. We thank you for your understanding! - .

Condition: used, axle configuration: 3 axles, wheelbase: 8,760 mm, first registration: 04/2010, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Rear doors - Air suspension - Sliding roof Fodexmr Tgjpfx Afpegh = Further information = Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Unladen weight: 6,800 kg Payload: 32,200 kg Gross vehicle weight: 39,000 kg Dimensions (L x W): 1390 x 255 cm Please contact Gert Woudenberg for further information.

Condition: used, Year of construction: 2003, Format: 260 x 380 mm Equipment: Letter Press Tiegel - DIE Cutter Punching force 40 tons Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph Complete with tools and accessories include frame Fjdexmr S Ajpfx Afpsgh

Condition: used, mileage: 185,000 km, fuel type: diesel, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: air conditioning, Box van, payload 1000 kg, manual gearbox, air conditioning, steering wheel controls, electric windows, single rear wheel. The above price is excluding 22% VAT and registration transfer costs. Fgodpfx Asxmr Svjfpoh

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic frame press Fodpoxmr Spefx Afpegh The machine is complete and fully operational Working range 3000 x 2000 mm

Condition: used, mileage: 105,000 km, power: 130 kW (176.75 HP), fuel type: diesel, wheelbase: 4,490 mm, overall weight: 3,500 kg, empty load weight: 2,133 kg, maximum load weight: 1,367 kg, first registration: 12/2020, next inspection (TÜV): 10/2027, loading space length: 4,300 mm, loading space width: 2,040 mm, loading space height: 400 mm, loading space volume: 3.4 m³, emission class: euro6, color: white, number of seats: 3, construction height: 2,305 mm, working width: 2,098 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, Climatic air conditioning (cab), central locking with remote control and internal operation, electrically adjustable and heated exterior mirrors, electric front windows, Multi-Function Display Plus, driver assistance system: hill-start assist, multi-function steering wheel, spare wheel with standard road tyres including on-board tools and jack, daytime running lights, Composition Audio system (radio - SD card interface - MP3 playback), Bluetooth mobile phone interface, heat-insulating glazing, Storage Package 2, driver airbag, anti-lock braking system (ABS), electronic stability program (ESP), engine start/stop system, diesel particulate filter, electronic immobilizer, headlight range adjustment, on-board tools and jack, electro-mechanical power steering, paint: Candy White, seat upholstery: synthetic leather, cab seats: double passenger seat with storage compartment and folding backrest for use as table, front storage: 2 DIN slots under roof liner, cab interior lighting: front reading light, chassis: reinforced dampers and stabilisers front and rear, front bumper in grey with vehicle-coloured trim, cab seats: comfort driver seat, reinforced front axle, truck registration, gross vehicle weight 3.50 t, radiator grille with chrome trim on top, convex exterior mirror left, convex exterior mirror right, twin headlights, LED indicator lights integrated in exterior mirrors, side marker lights, cab floor: rubber, A-pillar grab handles, 2 folding remote keys, seatbelt warning system (driver side), cab interior lighting: LED, twin-tone horn, driver assistance system: brake assist (HBA), adjustable steering column (steering wheel), SCR system (AdBlue technology), body/superstructure: standard dropside, wheelbase 4490 mm, drive type: front-wheel drive, 6-speed gearbox, over 150 transporters and buses in stock. Financing or leasing possible via Santander Consumer Bank, Bank 11, or Auto Europa Bank, we are happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed features may require separate verification. Changes, errors, and prior sale reserved. Delivery available at extra cost. Export license plates available on site. Trade-in of your old vehicle possible. Retrofitting of options available (for a surcharge): - Tow bars up to 3,500 kg - Auxiliary heaters - Display for reversing camera and/or navigation via smartphone (Android Auto) - Reversing system with rear camera - Workshop equipment - Cruise control - Retrofitting of a tail lift (LBW) and more individual solutions for your business needs available upon request. Fgjdpfsxmr Sisx Afpjh

Year of construction: 2023, condition: excellent (used), Wrapping machine Fgedpfx Afoxmr Scopoh

Condition: excellent (used), mileage: 193,899 km, power: 221 kW (300.48 HP), first registration: 04/1991, fuel type: diesel, color: other, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 1991, Equipment: ABS, = Additional options and accessories = - 1 fuel tank - Armrest - Central lubrication - Day Cabin - Drum brakes - Front suspension: Leaf - High Beams - PTO - Rear suspension: Leaf Fodexmr R Sepfx Afpogh - Thick Axles - Tipping hydraulics = More information = Cab: single Tyre profile: 50% Brakes: drum brakes Suspension: leaf suspension Front axle: Steering Technical condition: very good Visual appearance: very good Serial number: VF6BA07B100000693

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Powered by a hydraulic unit. Fgjdexmr Rxepfx Afpsh

Condition: ready for operation (used), Dry sorting line (17 pockets) Manufacturer - SATEKO (Valmet) modified - 1996 (7pcs) & 2023 (3pcs) Total number of pockets - 17 pcs Fsdpjxmr Rrsfx Afpogh Separate rake conveyor on top. Drop from above Latest update 3 pockets in 2023 (Biocone) Main layout attached

Condition: used, mileage: 77,174 km, power: 170 kW (231.14 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,000 mm, overall weight: 7,490 kg, empty load weight: 4,976 kg, maximum load weight: 2,514 kg, first registration: 02/2020, next inspection (TÜV): 07/2026, loading space length: 4,000 mm, loading space width: 2,350 mm, loading space height: 400 mm, emission class: euro6, color: blue, driver cabin: day cab, suspension: other, number of seats: 3, fuel: diesel, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, - MERCEDES-BENZ Atego 823 Three-way tipper Meiller - New inspection (HU) - Permissible total weight: 7,490 kg, unladen weight: 4,958 kg - Towing hitch (jaw coupling) trailer load: 11,000 kg - Ball coupling: 3,500 kg - Duomatic - hydraulic connections for trailer - very good condition - work light - rotating beacon - headlight protective grille - sun visor - front wall with spade holder - lane departure warning system - multifunction steering wheel - roof hatch - air horn - Michelin tires - four retractable lashing eyes per side - front wall: h=1.64m, w=2.34m - tipper body: l=4m, h=0.40m, w=2.35m Fgodpfx Aexmr Rlofpjh - Subject to errors and prior sale! - More information, further XXL images, directions available on our homepage at: - For inquiries in English please call ... Air conditioning, VAT deductible, ASR, ABS, roof hatch, Distronic, multifunction steering wheel, radio, on-board computer, cruise control, heated mirrors, electric front windows, electronic immobilizer, central locking with remote control, trailer coupling, power steering, locking differential, tinted windows, electrically adjustable mirrors, tachograph, cab: short cab, electric windows, work spotlight, one owner, emission standard: Euro 6, diesel, rear-wheel drive, HSN 7070, TSN ADA, particulate filter, fine dust sticker: 4 - green

Condition: excellent (used), functionality: fully functional, mileage: 990,000 km, power: 266 kW (361.66 HP), fuel type: diesel, color: white, fuel: diesel, brakes: engine braking, emission class: euro3, suspension: other, Year of construction: 2004, Equipment: ABS, air conditioning, DAF CF 75.360 flatbed truck with rear-mounted crane, year 2004, 3 axles (6x2), equipped with CORMACH 27.500 crane featuring 8 hydraulic extensions plus 1 manual extension, radio remote control, 4 hydraulic outriggers, short cab. Flatbed length: 8,500 mm, wheelbase: 5,500 mm, overall vehicle length: 11,700 mm. ZF 16-speed manual transmission, air conditioning, ABS, engine brake, Euro 3, GVW 26,000 kg, payload 11,702 kg. Third axle steered and liftable, rear pneumatic suspension, sun visor, electric mirrors and windows, radio, mileage: 990,000 km. Good operational condition. Fgsdpfx Afexmr Rfepsh

Condition: new, functionality: fully functional, Equipment: centralized greasing system, cooling unit, emergency stop, fume extraction, Ready from production and immediately available. QWEIKE increases production until the end of 2025. Fiber Lasers with Full Enclosure | Automatic Exchange Table GWeike Laser Machines Working area: 3,000x1,500mm* | 4,000x2,000mm Required floor space: 8,150x2,825x2,125mm* | 10,750x3,350x2,310mm Laser power: 3kW EQUIPMENT: - Automatic Focus Laser Head - France Motor reduction servo motors - Raycus Taiwan - Laser Source: Raycus - Water Chiller S&A - Smooth MicroJoint - Circle Center - One-Path FlyCut - Frame Border Contour - Avoid Collision in Travel - Frame Border Contour - Smooth Piercing - Fully enclosed housing ensures effective exhaust, high hygiene, and maximum safety. - Frame is welded from high-grade steel plate and tubing, providing high structural stability and shock resistance. - Segmented fume extraction for improved exhaust efficiency. * Laser Head automatic focus * Automatic Nozzle Control - Touch Pad Safety (NEW) * Application: Metal * Fiber Laser * Laser Source: RAYCUS/MAX * Simple operation with SMART function * CYPCUT software + CYPNest - Nesting, simulation, processing time and cost calculation, standard macro - Import: PLT, BMP, DST, DWG, DXF, DXP, STEP, etc. * 80m/min cutting speed * Servo motors on all axes * HiWin linear guide rails * Laser Head 2D auto. Focus * Water Chiller S&A * Real-time air and gas pressure monitoring * Laser Power 6kW (optional: 3kW - 12kW) * Working area 3,000x1,500mm (optionally 4,000x2,000mm) * Remote control * Automatic lubrication Danmar Machines BV, Almelo - Technicians with over 20 years of experience - Service locations in the Netherlands & Belgium - 24/7 online Cloud Service - Machine 24/7 network connection for permanent monitoring (optional) Fjdpsxmr N Usfx Afpegh Support & Service Danmar Machines BV, Almelo and GWEIKE INDUSTRIAL - daily technical support Fast response, direct communication, and clear lines SOFTWARE: Drawing modification and import Intelligent component recognition, identification and optimization of drawing errors. Supports DWG and DXF file formats. Supports batch creation and import of components via Excel table. CYPNEST: Nesting software designed for the CypCut/HypCut laser cutting system. Integrates advanced features for drawing adjustment, quick nesting, toolpath generation, analysis reporting, and more to meet your production requirements. Please contact us without obligation for more information. Kindly provide your company name and phone number.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, WEINIG Unicontrol UC 10-5 Window Production Machine 1. Electronically controlled crosscut saw with laser switching between saw cutting and zero-point wheel, 3 kW motor 2. Grooving spindle 50 x 630 mm for tools 6 x 80 mm, 15 kW motor 3. Longitudinal/synchronous profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 4. Grooving spindle (between 1st and 2nd lifting spindle), D = 40 x 40 mm, axially indexed, 3 kW motor Fsdpfjxmr N Iox Afpogh 5. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 6. Longitudinal profiling spindle 50 x 320 mm for tools 4 x 80 mm, 11 kW motor 7. Clamping spindle 40 x 150 mm, 3-position axial cycle, 2-position radial cycle, 3 kW motor Saw and grooving spindle on the right side, 3 kW motor Hardware spindle 40 x 150 mm, 3 kW motor Adjustable feed speed 6-12 m/min, 1.1 kW motor 4-position counter changer Electronic length stop, 3600 mm Workpiece return system with automatic rotating mechanism Automation package Interval-controlled sash support Double parts package Laminated fabric tables (for sanded surfaces) Pressure guide on the left, max. wood width difference 100 mm Machine in very good technical and visual condition

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 22, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 517 Sprinter Lord Comfort low-floor vehicle available for immediate delivery. Equipped with GSR2 systems, which are mandatory as of July 8, 2024. Many competitors offer vehicles without these systems! Base vehicle: - 125 kW Euro 6 e engine - 9-speed automatic transmission - Front air conditioning and original MB passenger air conditioning - Auxiliary heater - Driver's air-sprung seat with seat heating - Roof-mounted warning lights - Driver comfort package - Length: 7,336 mm - Rear view camera and PDC front/rear (Parking package) with front camera - Blind spot assist - Turn assist system Fgedpfjxmr Nzsx Afpsh - MBUX 10" (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention assist - Active lane keeping assist - Start information assist - Intelligent speed assist - Distance assist - Rain sensor - Electrically adjustable exterior mirrors - Cruise control Body conversion: - Thermal and acoustic insulation - Electric exterior swing door with recessed step - 22 + 1 passenger seats / sleeper seats - Total capacity 22 + driver (+ optional standing places); optionally reduced to 19+1 - VIP blacked-out double glazing - Convector heating in the passenger compartment - Roof hatch - Single luggage rack on the left - Original MB free-flow air conditioning in the passenger compartment - Passenger compartment interior lighting in white/orange - Curtains - Add-on parts painted in vehicle color Net export possible.

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 18, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Opel Movano School Bus (identical to Fiat Ducato) / Coach – Multiple vehicles available immediately Stock vehicle / Inventory vehicle available for immediate delivery Fiat Ducato available at short notice. Conversion as follows: - Acoustic and thermal insulation of passenger compartment - Original cut-out windows, tinted grey/black - 16 sleeper seats plus single passenger seat + driver’s seat = 18 total - Upon request, passenger seat or cash desk can be fitted next to driver’s seat - Convector heater in passenger compartment - Air conditioning in passenger compartment; optional second compressor available - Multi-level night lighting (white/orange) - Roof hatch - Electric drive on original sliding door - Electric step at original sliding door Fgjdpfx Afjxmr Nuspeh - Reinforced rear axle Options: Custom orders possible: Fiat Ducato, Citroen Jumper, Peugeot Boxer, or Opel Movano. Various equipment specifications in stock. - Electric central door + €2,000 - Double-width central door + €3,000 (reduces seating by 1) - 5 standing places Base vehicle with air conditioning, automatic transmission, PDC with rear-view camera, radio with hands-free system, multifunction steering wheel, ... Wheelbase: 4035 mm Overall length: 6223 mm Height: 2522 mm Width: 2050 mm Permissible gross weight: 4250 kg!! Special equipment: Driver and passenger airbags, Cool & Sound package, electrical interface for additional conversions, driver assistance system: parking pilot with rear-view camera, Lighting Package 1, tire repair kit, adjustable single passenger seat in cab, heated driver’s seat Further equipment: Exterior mirrors, single tires on 2nd/rear axle, driver assistance: Crosswind Assist, 185 A alternator, rear wing doors with windows (180° opening), high roof H2, permissible gross weight 4.25 t, body/superstructure: box high-volume, length variant L4, high roof variant (H2), 80L fuel tank, adjustable steering column, headlamp range adjustment, facelift version, 2.3L 132 kW CDTI engine, pollen filter, long wheelbase, low emissions per Euro 6e-TEMP, right-hand sliding door for cargo/passenger compartment, side marker lights, Vision Package, 6.5x16 steel wheels, LED daytime running lights, 4.25 t gross weight, top speed limited to 90 km/h Net export possible All information subject to change These are German vehicles, not re-imports. Custom orders for Citroen/Peugeot/Fiat Ducato or Opel Movano possible. We ship worldwide

Condition: new, power: 129 kW (175.39 HP), fuel type: diesel, gearing type: automatic, color: white, brakes: retarder, number of seats: 23, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, New Iveco Daily vehicle, base vehicle/existing (can begin conversion immediately). - Length 7618 mm - Width 2174 mm - Height 2900 mm - Wheelbase 4100 mm The base vehicle is richly equipped, including: - Air suspension - Telma - Hot water auxiliary heating - Automatic air conditioning - 8-speed automatic transmission - ADA systems - Oscillating seat with seat heating Extension or conversion as follows: - Thermal and acoustic insulation - Electric outward-swinging door - Webasto RT 145 air conditioning (dual climate control) - Ceiling ducts on the left and right with service sets - Multi-stage night lighting - Half platform/no wheel arch in the passenger compartment - Recessed trunk - 22 rear-adjustable GRL passenger seats with storage net and folding table Fgodpexmr Nnofx Afpjh - Tour guide seat - USB ports in each passenger row - Clock in the passenger compartment Net export possible