Used Claas Arion 550 for sale (65)

Condition: new, Year of construction: 2022, operating hours: 900 h, maximum speed: 40 km/h, Equipment: all wheel drive, compressed air brake, CLAAS Arion 550 CMATIC cebis 540/65 R28 Trelleborg TM800 / Fixed rim 650/65 R38 Trelleborg TM800 / Fixed rim / High Speed CLAAS front linkage 4.0 t including vibration damping Front PTO 1,000 rpm Reinforced transmission frame, engine side panels for front loader External control for front linkage CEBIS operator terminal with touch function CMATIC including engine speed memory plus CSM, CEBIS ISOBUS preparation, rear Task Control Basic activation, tractor side CEMOS demo version – 400 h AUTO PILOT / GPS PILOT Ready CLAAS communication module (LTE) CLAAS Remote Service including five-year license ISOBUS activation for CEBIS GPS PILOT activation – SAT 900 GNSS receiver ELECTROPILOT with reversing function CEBIS video unlocking function + CPC Incab connection for 2 cameras Steering interface prepared Steering interface unlocking Electronic Hitch control (EHR) Category 3 lower link with catch hook Automatic lower link side stabilizers Hydraulic top link, Category 3 catch hook Towing bracket with drawbar insert Rear power lift, increased lifting capacity Pslhowdkwuoccqnogk Drawbar with tow ball for standard towing bracket Automatic drawbar with 38 mm pin diameter Dual-circuit air brake system Load-sensing hydraulic system, 150 l/min 4 control valves, electro-hydraulic proportional (CEBIS) 2 plug-in connections at the front / 1 pressureless return line Power Beyond, LS connections without flat-face coupler CMATIC transmission, continuously variable Gear ratio 40 km/h PROACTIV front axle with wet multi-disk brakes Standard rear axle, 275 mm PTO 540/540 ECO rpm PTO stub 6-piece, 1 3/8" Pivoting front fender, 540 mm Standard transmission management Steering angle sensor for PROACTIV braked front axle 165 hp maximum power, 159 hp homologated rated power, ECE R 120 Electronic battery master switch Electric mirrors, including wide-angle mirrors Fender flares, 2.55 m outer width, wheel diameter 1.93 m Terminal rail, right side window Removable storage box, left 2 spare driver lights, A-pillar Standard taillights, LED with warning signs 4x LED driving lights, 2x LED work lights on hood The installed CEMIS 1200 is not included in the price, but can be purchased for an additional charge. | Internal No.: 11190365

Condition: used, Year of construction: 2015, operating hours: 5,500 h, power: 116 kW (157.72 HP), Equipment: compressed air brake,

Condition: used, Year of construction: 2023, operating hours: 550 h, Equipment: air conditioning, all wheel drive, CLAAS Arion 550 Cmatic Cebis Stage V demonstration machine used with approx. 570 operating hours Equipment: 540/65 R28 Mitas AC65 / fixed rim 650/65 R38 Mitas AC 65 / fixed rim CLAAS front linkage 4.0 t including vibration damping Reinforcement frame for transmission, engine side panels for front loader External operation for front linkage CEBIS operating terminal with touch function CMATIC including engine speed memory plus CSM, CEBIS ISOBUS preparation, rear Activation of Task Control Basic, tractor side AUTO PILOT / GPS PILOT Ready ISOBUS activation for CEBIS CLAAS connect & 365FarmNet - L ELECTROPILOT with reversing function Activation. Video function CEBIS + CPC Incab connection for 2 cameras Electronic. Lifting system control (EHR), standard Lower link Cat. 3 with catch hook Lower link side stabilizers, automatic Hydraulic top link, catch hook Cat. 3 Towbar with drawbar insert Rear power lift, increased lifting capacity Towing jaw, automatic with 38 mm bolt diameter Compressed air brake system (2-circuit) Automatic trailer extension brake Hydraulic system load sensing 150 l/min 4 control units, electro-hydraulic proportional (CEBIS) 2 plug-in connections at the front / 1 pressureless return Power-Beyond, LS connections without flat face coupler CMATIC transmission, continuously variable Gear ratio 50 km/h Front axle PROACTIV with wet disc brakes PTO shaft 540/540 ECO ECO rpm PTO shaft stub 6-part, 1"3/8 Pelhccsvfy N Deqnegk Front wheel fender, swiveling, 540 mm Steering angle sensor for PROACTIV front axle braked 165 HP max. power, 159 HP homologated rated power, ECE R 120 Battery master switch, electronic Fuel tank 215 l 5-post cabin with 4-point suspension Rear window for 5-post cabin, tinted Rear window wiper Electric mirrors, including wide-angle mirror Fender extensions 2.55 m external width, wheel diameter. 1.93 m Terminal rail, roof liner Removable storage box, left Additional interface sockets 2 driver's replacement headlights, A-pillar Tail lights, standard, LED with warning signs 4x driving headlights LED, 2x work lights LED on hood Work lights LED - Plus Work lights LED - Premium Comfort seat, fabric, semi-active longitudinal/horizontal suspension Passenger seat with seat belt Automatic climate control, including preparation for Cat. 3 MP3 radio with Bluetooth, USB, SD, external microphone and hands-free system Cigarette lighter Steering wheel, leather 2 LED rotating beacons, foldable Digital package I LED package Premium Driver package Premium | Internal no.: 11113522

Condition: new, Year of construction: 2023, operating hours: 1 h, maximum speed: 50 km/h, Equipment: all wheel drive, Claas Arion 550 CMATIC CIS+ Polowacp Iohccqnjgk New machine from 2023, approx. 5 operating hours Equipment: 540/65 R28 Mitas AC65 / fixed rim 650/65 R38 Mitas AC 65 / fixed rim CLAAS front linkage 4.0 t including vibration damping Front loader mounting bracket Reinforcement frame for transmission, engine side panels for front loader External control for front linkage CIS+ with color display CMATIC including engine speed memory plus CSM (CIS+) ISOBUS preparation, rear Activation of Task Control Basic, tractor side AUTO PILOT / GPS PILOT Ready ELECTROPILOT with reversing function Activation of steering interface Electronic Standard hitch control (EHR) Category 3 lower link with catch hook Automatic lower link side stabilizers Mechanical top link, Category 3 catch hook Automatic drawbar with 38 mm pin diameter Category 3/2 ball set Dual-circuit air brake system Automatic trailer anti-skid brake Load-sensing hydraulic system, 150 l/min 4 + 2 control units, electro-hydraulic proportional (CIS+) Power Beyond, LS connections without flat-face coupler CMATIC transmission, continuously variable Gear ratio 50 km/h PROACTIV front axle with wet multi-disk brakes 540/540 ECO ECO rpm 6-piece PTO stub, 1"3/8" Rear wheel weights 518 kg CMATIC 2.0 - Cruise control deactivation via accelerator pedal (CIS+) Steering angle sensor for PROACTIV front axle braked 165 hp maximum power, 159 hp homologated rated power, ECE R 120 Electronic battery main switch 5-post cab with 4-point suspension Roof with glass roof hatch Electric mirrors, including wide-angle mirror Fender flares, 2.55 m exterior width Removable storage box, left Additional interface sockets 2 spare driver headlights, A-pillar 4x LED headlights, 2x LED work lights on hood LED work lights - Plus Halogen work lights: 2x indicator brackets, 2x rear fenders CIS+ Comfort seat, fabric, semi-active longitudinal/horizontal suspension Automatic climate control, including Cat. 3 preparation MP3 radio with Bluetooth, USB, SD External microphone and speakerphone. | Internal No.: 11193032

Condition: new, Year of construction: 2024, operating hours: 1 h, maximum speed: 50 km/h, Equipment: compressed air brake, onboard computer, Claas Arion 550 Cmatic CIS+ New machine, built in 2024 currently approximately 5 operating hours Equipment: 540/65 R28 Mitas AC65 / fixed rim 650/65 R38 Mitas AC 65 / fixed rim CLAAS front linkage 4.0 t including vibration damping Reinforced transmission frame, engine side supports for front loader External control for front linkage CIS+ with color display 24/24 speed HEXASHIFT, HEXACTIV, speed limiter ISOBUS pre-installation, rear Activation of Task Control Basic, tractor side CLAAS communication module (LTE) CLAAS Remote Service including five-year license ELECTROPILOT with reversing function Machine Connect license – 5 years Steering interface, standard Electronic Standard hitch control (EHR) Lower link Cat. 3 with catch hook Lower link side stabilizers, automatic Mechanical top link, catch hook Cat. 3 Towing bracket with drawbar insert Rear power lift, increased lifting capacity Automatic drawbar with 38 mm pin diameter Cat. 3/2 TrueTrue ball set Air brake system (2-circuit) Load-sensing hydraulic system 150 l/min 3 + 2 control units, electro-hydraulic proportional (CIS+) 2 plug-in connections at the front / 1 pressureless return line Power Beyond, LS connections without flat face coupler Transmission without creeper gear Gear ratio 50 km/h PROACTIV front axle with wet multi-disk brakes PTO 540/540 ECO rpm 6-piece PTO stub 1"3/8" Pivoting front fender, 540 mm SMART STOP + Cruise Control Management 165 hp max. power, 159 hp homologated rated power, ECE R 120 Electronic battery main switch 245 l fuel tank 5-post cab with 4-point suspension Roof with glass roof hatch Rear window for 5-post cab, tinted Rear window wiper Electric mirrors, including wide-angle mirror Terminal rail, right side window Removable storage box, left Additional interface sockets 2 driver's spare headlights, A-pillar TrueTrue Standard halogen taillights with warning signs 4x halogen driving lights, 2x halogen work lights, hood Pgolhccov T N Iroqnjk LED work lights – Basic LED work lights – Basic Comfort seat, fabric, semi-active longitudinal/horizontal suspension Passenger seat with seat belt Automatic climate control Includes Cat. 3 preparation MP3 radio with Bluetooth, USB, SD, external microphone, and hands-free system Cigarette lighter Leather steering wheel 2 LED rotating beacons, foldable Type plate, EU Premium Driver's Package | Internal No.: 11181386

Condition: new, Year of construction: 2023, operating hours: 968 h, maximum speed: 40 km/h, front tire size: 420/70 R28 Mitas HC 70, rear tire size: 600/65 R38 Mitas AC 65, Equipment: all wheel drive, compressed air brake, Front linkage | Claas Arion 470 CIS + rental machine with approx. 1,000 operating hours, built in 2023 420/70 R28 Mitas HC 70 / fixed rim 600/65 R38 Mitas AC 65 / fixed rim CLAAS front linkage 2.8 t including external controls Front loader mounting bracket for ELECTROPILOT External controls on the front linkage (CIS) CIS, color-coded control terminal 2 engine speed memories with start gear and automatic gearshift 200 A/h alternator ISOBUS ready, rear Multifunction control lever with ELECTROPILOT Reverse shift function on the multifunction control lever Rear linkage, electrohydraulic, 6.25 t Lower linkage category 3 with catch hook 2 side stabilizers on the lower linkage, automatic Top link category 3/2 with catch hook Towing hitch, automatic with 38 mm bolt diameter Air brake system (2-circuit) Additional compressed air connection, right side of cab Load-sensing hydraulic system (150 l/min) 3 electro-hydraulic proportional control units, CIS+ Mid-axle control units with front axle, front suspension, and 1x dual/rear Pjlhccqowfy Sdsnjgk HEXASHIFT transmission Gear ratio 40 km/h PROACTIV front axle with independent wheel suspension including steering angle sensor 540/540 ECO PTO + 1000 rpm 6-piece PTO stub, 1"3/8 Pivoting front wheel fender, 470 mm Track adjustment rings for rear axle (2 x 43 mm) SMART STOP with cruise control management 145 hp max. power, 154 hp homologated Rated power, ECE R 120 Battery master switch, electronic 155 hp max. power, 154 hp homologated Rated power, ECE R 120 6-post PANORAMIC cab, 2-point cab suspension PANORAMIC roof Rear window wiper Mechanical mirror, including wide-angle mirror, telescopic Fender base, green/wide version, including extension (2.50 m) Additional interface sockets 2 spare driver's headlights on the roof, halogen Main headlights + 2 work lights on the hood LED work lights: 2 front, 4 rear Driver's seat, fabric, low-frequency suspension Air conditioning, including Cat. 3 preparation MP3 radio Optional with FL 120 front loader, built in 2023 Equipment: EURO tool holder Mechanical locking MACH quick coupling system (NS) 3rd hydraulic function, including 2 ISO plug-in couplers FITLOCK Hydraulic parallel guide Surcharge: EUR 7,500.00 net plus 19% VAT. | Internal No.: 11088922

Condition: used, Functionality: fully functional, Year of construction: 2014, operating hours: 6,420 h, power: 128 kW (174.03 HP), motor manufacturer: John Deere, gearing type: semi-automatic, fuel type: diesel, maximum speed: 40 km/h, first registration: 04/2014, next inspection (TÜV): 03/2026, color: light green, front tire size: 540/65 R28, rear tire size: 580/70 R38, total height: 3,350 mm, total length: 6,460 mm, total width: 2,250 mm, machine/vehicle number: A3624EAA3601166, Equipment: additional headlights, air conditioning, cabin, front power take-off, hydraulics, lighting, power shift gear, The machine is regularly serviced in an authorized service center. The tractor includes rear wheel weights (2x267 kg) Pslhccev Sz Dpsqnsgk

Condition: used, Year of construction: 2016, operating hours: 6,667 h, power: 129 kW (175.39 HP), front tire size: 540/65R30, rear tire size: 650/65R42, Equipment: compressed air brake, power shift gear,

Condition: used, Year of construction: 2020, front tire size: 340/85R28, rear tire size: 420/85R38, Equipment: compressed air brake, front-end loader, Compressed air 1 and 2-circuit / Pgjlhjttg Rwoccqnek

Condition: new, Year of construction: 2024, operating hours: 300 h, Equipment: all wheel drive, Claas Arion 470 CIS Demo machine in use, built in 2024 Approx. 400 operating hours Equipment: 480/65 R28 Trelleborg TM800 / fixed rim 600/65 R38 Trelleborg TM800 / fixed rim CLAAS front linkage 2.8 t including external controls Front loader mounting bracket for ELECTROPILOT External controls for the front linkage (CIS) Bonnet protection CIS, color-coded control terminal 2 engine speed memories with start gear and automatic shifting 200 A/h alternator ISOBUS pre-installation, rear Multifunction control lever with ELECTROPILOT Reverse shift function on the multifunction control lever Rear linkage, electrohydraulic, 6.25 t Category 3 lower link with catch hook 2 lateral stabilizers on the lower link, automatic Drawbar with tow ball Automatic drawbar with 38 mm pin diameter TrueTrue air brake system (2-circuit) Additional compressed air connection, right side of cab Load-sensing hydraulic system (150 l/min) 3 mechanical control units (LS), CIS Mid-axle control units with front axle, front suspension, and 1x dual/rear Power Beyond (LS connections without coupler) HEXASHIFT transmission Gear ratio 40 km/h PROACTIV front axle with independent wheel suspension including steering angle sensor 540/540 ECO PTO + 1000 rpm 6-piece PTO stub, 1"3/8 Pivoting front wheel fender, 520 mm Track adjustment rings for rear axle (2 x 43 mm) Rear PTO control Rear PTO automatic control SMART STOP with cruise control 145 hp maximum power, 154 hp homologated rated power, ECE R 120 Electronic battery main switch 155 hp maximum power, 154 hp homologated Rated power, ECE R 120 6-post PANORAMIC cab, 2-point cab suspension PANORAMIC roof Rear window wiper Mechanical mirror, including telescopic wide-angle mirror Additional interface sockets 2 spare driver's headlights on the roof, halogen Main headlights + 2 work lights on the hood LED work lights: 2 front, 4 rear Driver's seat, fabric, low-frequency suspension Passenger seat with seat belt Air conditioning, including Cat. 3 preparation Pgslhccewfy Skjqnek MP3 radio with Bluetooth, USB, and hands-free system Optional with FL 120 front loader, built in 2023 Equipment: EURO tool holder Mechanical locking MACH quick coupling system (NS) 3rd hydraulic function, including 2 ISO plug-in couplers FITLOCK Hydraulic parallel guide Surcharge: EUR 7,750.00 net plus 19% VAT | Internal No.: 11264583

Condition: used, Year of construction: 2023, operating hours: 30 h, power: 107 kW (145.48 HP), maximum speed: 40 km/h, front tire size: 540/65R24 BKT, rear tire size: 650/60R28 BKT, Equipment: all wheel drive, compressed air brake, Claas Arion 470 CIS+ Approx. 30 operating hours Current equipment: Rear tires: BKT 650/60R 38 Front tires: BKT 540/65 R24 CLAAS front linkage 2.8 t including external controls External controls on the front linkage (CIS) 2 engine speed memories with start gear and automatic shifting Alternator 200 A/h ISOBUS pre-installation, rear Task Control Basic activation, tractor side Multifunction control lever with ELECTROPILOT Reverse shift function on the multifunction control lever Rear linkage, electro-hydraulic, 6.25 t Lower link Cat. 3 with catch hook Top link Cat. 3/2 with catch hook Automatic drawbar with 38 mm pin diameter Air brake system (dual-circuit) Additional compressed air connection, right side of the cab Hydraulic system Load-sensing (150 l/min) 3 electro-hydraulic proportional control units, CIS+ Mid-axle control units with front axle and 1 dual-clutch/rear connection 2 plug-in connections at the front HEXASHIFT transmission Gear ratio 40 km/h PROACTIV front axle with independent wheel suspension including steering angle sensor Standard rear axle 540/540 ECO + 1000 rpm PTO shaft 6-piece PTO shaft, 1"3/8" With automatic PTO, rear SMART STOP with cruise control management 145 hp max. power, 154 hp homologated rated power, ECE R 120 Automatic, electronic battery master switch 155 hp max. power, 154 hp homologated rated power Rated power, ECE R 120 6-post PANORAMIC cab, 2-point cab suspension Mechanical mirror, including wide-angle mirror, telescopic Additional interface sockets 2 spare driver's headlights on the roof, halogen Main headlights + 2 work lights on the hood Pgslev R Niwshccqnjk LED work lights: 2 front, 4 rear Comfort seat, fabric, low-frequency suspension, heated Passenger seat with seat belt MP3 radio with Bluetooth, USB, and hands-free system Cooling compartment for a 1.5 l bottle (under the guide seat) Automatic all-wheel drive, steering angle-dependent | Internal No.: 11114182

Condition: new, Year of construction: 2024, operating hours: 50 h, power: 71 kW (96.53 HP), maximum speed: 40 km/h, front tire size: 440/65 R28, rear tire size: 540/65 R38, Equipment: compressed air brake, Radio | Cab suspension: mechanical | Claas Arion 420 Advanced demo machine used approx. 50 operating hours equipment: Pslhccqerfppzenogk front tires 440/65 R28 rear tires 540/65 R38 front weight carrier front loader console for FLEXPILOT multifunction handle FLEXPILOT rear power lift 4.5 t lower link cat. 3 with catch hook upper link cat. 3, mechanical automatic lower link side stabilizers automatic trailer coupling 2-circuit pneumatic brake system open hydraulic system, 100 L/min 3 mechanical control units pressureless return QUADRISHIFT transmission with 40 km/h gear ratio power take-off shaft 540/540 ECO and 1000 rpm 98 HP homol. Power from a 4-cylinder FPT engine electronic battery master switch 4-post PANORAMIC cabin with panoramic roof Air conditioning Driver's seat, air-suspended MP3 radio with Bluetooth Automatic all-wheel drive | Internal no.: 11181284

Condition: used, mileage: 5,200 km, power: 90 kW (122.37 HP), gearing type: automatic, fuel type: diesel, color: green, overall weight: 8,500 kg, empty load weight: 5 kg, maximum load weight: 2,900 kg, lifting height: 6,150,000 mm, number of seats: 1, first registration: 01/2016, operating hours: 5,200 h, total height: 46,800 mm, driver cabin: other, wheelbase: 2,850 mm, Boom 6 m, tires new and as good as new, various hydraulic connections renewed, lifting capacity 3,500 kg, with pallet fork and shovel, engine power 90 KW, 3,621 m³, wheelbase 2,850 mm, lifting capacity with max. boom 1.35 to, fully functional, max. load . 8,500 kg Note Polhccqsvikp Nsnjgk Despite careful checking of all our prices, it is not uncommon for errors to creep in. Some of these are caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Nor can a price label be declared as part of the contract. If you attach particular importance to a specific feature of our property, please let us know when you sign the contract. Thank you for your understanding! - .

Condition: new, Year of construction: 2024, operating hours: 1 h, Claas Scorpion 756 Demo machine in use Currently approx. 60 operating hours Equipment: CLAAS hydraulic tool carrier, including lifting pin Pivot angle 150° / 152° Emergency lowering of telescopic arm 4-pin front socket 7-pin rear socket Automatic and height-adjustable trailer coupling 3rd & 4th auxiliary control circuits (dw) including continuous operation Front pressure relief, from the cab and outside on the telescopic arm 3rd auxiliary control circuit (dw) including continuous operation Top frame cover Front lift arm scraper 40 km/h VARIPOWER PLUS 500/70 R24 Bibload Michelin Deutz engine 4.1 liters, 115 kW, Stage V Vacuum pre-cleaner Pgolhewfivxoccqnek Reversible radiator fan incl. Automatic function Diesel particulate filter Combined instrument cluster, 3.5-inch multicolor display Interior mirror Air conditioning Windshield wipers for front and roof windows Steering column, two-way tilt and height adjustable Driver's seat, fabric cover, low frequency, with seat heating Radio including Bluetooth, hands-free system with external microphone LED work lights, telescopic arm, front, 2 pieces Sun blinds for roof and windshield LED work lights, 3 x front & 3 x rear TrueTrue vibration dampening Automatic bucket return system Central lubrication points, 3 x (front, rear, telescopic arm) Central lubrication system, prepared Slow-speed device and hand throttle with DYNAMIC POWER Tilt cylinder vibration function EC Certificate of Conformity Overload warning device | Internal No.: 11180852

Condition: used, Year of construction: 2015, Auction item. The mower is used on a tractor in working condition. Pgslhccqewfptkjnjk Claas Disco 9100 C (attaches to the rear of the tractor) and Claas Disco 3200 FC (attaches to the front of the tractor) are for sale. The year of manufacture may not be accurate.

Condition: used, Functionality: fully functional, Year of construction: 2020, operating hours: 4,103 h, power: 308 kW (418.76 HP), fuel type: diesel, Category: Tractor and wood chipper Manufacturer: Claas and Doppstadt Name: Claas Xerion 4000 and Doppstadt DH812Q Doppstadt DH812Q: Power: 250-370 kW Pgslhcsv I Uckscqnek Epsilon forwarder crane type S100F101 - CRANAB Energy wood grapple CE 280 Feeding height: 950 mm / Feeding width: 1,200 mm Rotor diameter: 1,000 mm / Rotor width: 1,200 mm Variable feeding speed Easy screen basket change for quality wood chips from P16 to P100 (G30-G100) Hydraulic pressure device for feed roller LED lighting package: 1x discharge, 2x feed, 1x interior lighting Camera on the Discharge spout Forestry tires 600/50 R22.5

Condition: new, Functionality: fully functional, Year of construction: 2024, motor manufacturer: Perkins 1106D-M, gearing type: mechanical, fuel type: diesel, maximum speed: 25 km/h, front tire size: 23. 1-26 12PR, rear tire size: 14.5/75-20 8PR, Equipment: air conditioning, New Claas Dominator 130 - more than 10 pcs 4 walkers, C420 header, 3.200 liter grain tank, air conditioner, heating, Tier 3 Perkins engine Year: 2025 Horsepower: 152 HP Displacement: 7010 ccm Number of cylinders: 6 Type of the engine: Perkins 1106D-M Transmission: Mechanical Max speed: 25 km/h Size of the header: 4,2 m Transport trolley: No AdBlue: No // Cab // - Suspended operator seat - Air conditioner - Heating - Adjustable steering column - Sun visor - Grain tank viewing window - Front wiper Pgolhccjuru Tmoqnsk - External mirrors // Rims and tires // - 23.1-26 12PR front tires - 14.5/75-20 8PR rear tires // Lighting and electric systems // - Road lighting // Attachments // - 4,2 m C420 grain header with crop lifters (in wood packaging) - Work light accessory pack (not installed) - Toolbox with tools // Others // - 4 straw walkers with 4 steps and ball bearings - Threshing system for corn and grain - Threshing drum drive: 650 - 1.500 rpm - Concave gap can be adjusted from the cab - Intensive separator with straw guide system - Large stone trap - Cutterbar reverser - High-velocity cleaning fan - Removable preparation floor - Fan guard - Returns feed to drum - Returns visible from the cab on the go - 3.200 liter grain tank - 35 liter unloading speed - 200 liter fuel tank - Fuel pump for use at high altitudes - SPECIAL PRICES AVAILABLE FOR ORDERS ABOVE 10 PCS! - Claas has discontinued the production, dont miss out the last units! Should you have any questions, please don't hesitate to contact us. Phone: please see contact details We also offer Europe-wide shipping. Agropark: 39595

Condition: used, Year of construction: 2025, operating hours: 3 h, CLAAS Jaguar 940 Demonstration Machine 2025 Equipment: Best Brand - Driver's Package: Comfort cab with A/C MATIC (automatic air conditioning and heating) Electric and heated rearview mirrors LED maintenance and access lighting DAB+ radio Premium LED work lighting Cooling unit for storage box L Sun blinds, smartphone holder, and compressed air in the cab Leather comfort seat, air-suspended PREMIUM LINE Longlife (6,000 operating hours or 10 years) PREMIUM LINE advanced package - Crop flow L and carbide counterblade Assistant package: DYNAMIC POWER Camera system, ready AUTO Fill wagon filling system V-FLEX 28 chopping unit, including corn knife MULTI CROP CRACKER MAX 120/130 teeth with Busa CLAD coating Silage additive system with tank (375 l) and ACTISILER 37 Electro-hydraulic accelerator gap adjustment Drive axle with differential lock Pgjlewfivrjhccqnek Front tires 710/75 R34 Front tire pressure control system Mercedes Benz R6-cylinder OM471 LA (390 kW/530 hp) Compressed air horn Rear camera with CEBIS display PROFI CAM QUANTIMETER yield measurement Steering angle sensor STOP ROCK stone detector CAM PILOT steering pilot Dynamic steering Compressed air brake PickUp 300 Profi Contour | Internal No.: 11277163

Condition: used, Year of construction: 2009, Auction item. header is used on a tractor with a Claas P420 grass pick-up and is in working condition. Polswfpnhjhccqnjgk The working width of the header is 6 000 mm, of the grass picker is 4 300 mm.

Condition: new, Year of construction: 2021, working width: 3,000 mm, Cutter bar: Discs | Claas Disco 320 C rear-mounted mower Stock item from 2021 Disc mower with tine conditioner 3.0 m working width 1130 kg dead weight with MAX CUT cutter bar 7 cutting discs with 2 blades each incl. quick-change blade system 540 rpm PTO speed Pgelhcev Aqnlocqnok Mounting category II | Internal no.: 10996987

Condition: used, Year of construction: 2022, operating hours: 109 h, Claas Quadrant 5300 FC Rental machine 5,070 bales produced Equipment: Pickup with POWER FEEDING SYSTEM (PFS), 2.35 m pickup width Pickup gauge wheels, oscillating and manually foldable Hydraulic flywheel brake FINE CUT cutting rotor with 51 knives (51-26-13-12-0) Hydraulic folding for roller chute with weighing system Roller chute with 3 rollers and weighing system (currently removed) Bale ejector Dustproof and pivoting twine box Single wide-angle PTO shaft, 6-piece, 1 3/8" Universal drawbar for top hitch K80 ball hitch Shear bolt coupling Wheel cover for 620/50 tires R22.5 Tandem steering axle Tires 620/50 R22.5 Dual-line air brake system for tandem steering axle Bale deposit sensor Right/left indicator including knotter monitoring ISOBUS cable, without terminal Electric bale length adjustment Automatic baling pressure control Automatic central lubrication system, electrically controlled | Internal No.: 11079529 Pgelowbw Rvehccqnjk

Condition: used, Year of construction: 2022, operating hours: 4,100 h, maximum speed: 50 km/h, Equipment: all wheel drive, compressed air brake, Claas Axion 850 Cmatic CIS+ Year of manufacture 2022 Currently 4,100 operating hours Equipment: 600/70 R30 Mitas SFT / fixed rim / wide track width 710/70 R42 Mitas SFT / fixed rim CLAAS front linkage 4.6 t External control for front linkage 3-point cast iron weight 900 kg CIS+ control terminal, color display CMATIC including 2 speed memories (CIS+) Task Control Basic activation, tractor side AUTO PILOT / GPS PILOT Ready TELEMATICS advanced license – 1 year CLAAS Remote Service including five-year license ELECTROPILOT with reversing function Steering interface ready Steering interface activation Electronic Hitch control, standard ELC Lower link rear linkage, Cat. 3 catch hook Lower link stabilizers, automatic Long hydraulic top link, Cat. 3 catch hook Towing bracket with drawbar insert Drawbar with tow ball Ball coupling including tow bar, automatic Cat. 3/3 ball set Air brake system (2- and 1-circuit pre-adjustment), including air dryer Load-sensing hydraulic system, variable pump 150 l/min, 200 bar 4 control valves, electrohydraulic proportional No front connections if front linkage is installed Power Beyond, load-sensing connections with flat-face couplers CMATIC - Continuously Variable Transmission Gear ratio 50 km/h Front axle with PROACTIV brakes PTO 540/540 ECO + 1000 rpm PTO stub 1 3/8" 6-piece and 1 3/4" 6-piece Parking brake on the REVERSHIFT lever CMATIC 2.0 - Cruise control deactivation via accelerator pedal (CIS+) 264 hp max. power, 261 hp homologated Rated power, ECE R 120 Electronic battery main switch Air compressor Pgolhewblkkoccqnek Engine brake Cabin with 4-point suspension Roof with rear-opening roof hatch Tinted rear window for 4-post cab Rear window wiper, including right-hand side wiper Electric mirror, including wide-angle mirror Rear fender flares, external width 2.75 m Removable storage box, left Additional interface sockets 2 spare driver's headlights, A-pillar Extra-wide halogen taillights with warning signs 4 halogen headlights, 2 halogen work lights, hood Halogen work lights: 4 front roof lights, 4 rear roof lights Premium LED work lights Comfort seat, fabric, semi-active, laterally suspended Passenger seat with seat belt Automatic climate control, including Cat. 3 preparation MP3 radio with Bluetooth, USB, SD, external microphone, and hands-free system | Internal No.: 11060349

Condition: new, Year of construction: 2023, operating hours: 600 h, Claas Telehandler Scorpion 756 Varipower Plus GENERATION 2 Year of manufacture 2024 Currently 600 operating hours (used as a demonstration machine) Technical specifications: Lifting capacity 5,600 kg Lift height 7,030 m Terrain weight 10,600 kg Hydrostatic VARIPOWER PLUS drive 40 km/h travel speed Equipment: CLAAS tool carrier with hydraulic locking Automatic and height-adjustable trailer coupling Mirror for trailer coupling 3rd & 4th auxiliary control circuits at the front (including permanent function) Tires 500/70 R24 Michelin Bibload Engine Deutz TCD4.1 L4 (115 kW / 156 HP) Reversible radiator fan 3.5-inch instrument cluster Air conditioning Fabric-covered driver's seat Heated seats with air suspension Radio including Bluetooth and hands-free system LED work lights on the telescopic arm, 3 at the front and 3 at the rear Vibration dampening 3 central lubrication points Peloru Euxohccqnogk Slow-speed control and hand throttle with DYNAMIC POWER Acoustic reversing alarm | Internal No.: 11142774

Condition: new, Year of construction: 2024, operating hours: 1 h, working width: 9,500 mm, Cutter bar: Discs | CLAAS Disco 9700 C Contour New from 2024, not yet completed - Large-area mower for rear tractor mounting, Category III - Working width 8.80 m - 9.50 m, hydraulically adjustable - Main frame with optimized center of gravity thanks to angled rearward-mounted booms - Low-speed concept with speed reduction to 850 rpm - Tine conditioner with V-shaped, rubber-mounted steel tines Equipment: Wear skids 3-point hitch Wide-spreading system 1 3/8" PTO shaft, 6-piece Pgslhccewbaytsqnok ISOBUS cable External protective covers, hydraulically foldable Automatic slope control Claas Disco 3200 FC front mower available as an option | Internal No.: 11180889

Condition: new, Year of construction: 2025, working width: 3,700 mm, CLAAS Liner 370 Year of manufacture 2025 - new demonstration machine Technical specifications and equipment: - Single-rotor rake for 3-point hitch, Cat I+II - Drive 540 rpm - Working width 3.70 m - 1 swath rotor with a diameter of 2.90 m Pgjlhccqjwaui Tensk - 11 tine carriers - 3 double-spring tines per tine carrier - Double-spring tines Ø 9.0 mm - Incl. swath curtain and PTO shaft - Approx. 450 kg dead weight | Internal No.: 11264616