Used Colchester Triumph Vs 2500 for sale (66)

Condition: excellent (used), Swing over bed 400 mm Distance between centers 1250 mm Spindle speeds 0-2500 rpm Ijlheq Dll Doccqrjat Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2000, Colchester Triumph VS2500 Gap Bed Centre Lathe Max. Distance Between Centres 1250mm Max. Swing over Bed 400mm Max. Swing in Gap 585mm Max. Swing over Cross Slide 246mm Spindle Nose D1-6 Camlock Spindle Bore 54mm Spindle Speeds 13 -2500 rpm (3 Ranges) Selection of Tool Holders 7.5kw / 10hp Motor Supplied with: Digital Readout 3 Jaw Chuck 3 Point Fixed Steady Selection of Holders Coolant 415V Electrics FOR SALE WITH JET MACHINERY LTD Jet Machinery Stock No: #78790 Machine Serial Number: 2575007770 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use. Iajlewihl Hjhccqret

Condition: good (used), Machine will come without tools. Iajlhcounyk Nocqrst

Condition: used, Functionality: fully functional, machine/vehicle number: 6/0008/08085, MACHINE SPECIFICATION Cont’d Diametral threads (21) 8 - 44 DP Metric pitches (39) 0.2 – 14mm Module pitches (18) 0.3 – 3.5 mod Sliding feeds, per rev. of spindle 0.0015 – 0.040” Surfacing feeds, per rev. of spindle 0.00075 – 0.020” Machine in Metric execution Iaelhccewczcfeqrot MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 Jaw chuck Quick change toolpost Chuck guard Coolant System Lighting Rear splashguard

Condition: excellent (used), Colchester Triumph 2000 x 30” Gap Bed Centre Lathe Height of Centres 190mm Max’ Distance Between Centres 762mm Max’ Swing over Bed 390mm Max’ Swing over Cross Slide 240mm Max’ Swing in Gap 580mm Spindle Bore 54mm Spindle Nose D16 Camlock Spindle Taper in Bush No.4 Morse Spindle Speeds 25 - 2000 rev/min Tailstock No.4 Morse 3 Phase Electrics 7.5hp Motor Supplied with: Ielevlw H Hjhccqrsat 3 Jaw Chuck Quick Change Tool Post *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78765 Machine Serial Number: 6/0047/22041 Cost: £5,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Ielhsnr Nl Ssccqroat Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: good (used), COLCHESTER TRIUMPH 2000 190 x 1270 mm Iajlhccqswcv H Ejrjt 2000 rpm Bar diameter 54 mm Camlock 6" 7.5 HP/5.6 KW Weight 1180 kg Checked and functional machine and complete with accessories as shown in the photo Checked and functional machine and complete with accessories as shown in the photo

Condition: good (used), Functionality: unexamined, turning diameter over cross slide: 178 mm, spindle bore: 35 mm, turning diameter: 280 mm, center height: 145 mm, turning length: 750 mm, total length: 1,700 mm, total width: 800 mm, total height: 1,800 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 70 rpm, overall weight: 800 kg, - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 11 A - Spindle nose: D 1-3 - Morse taper in head sleeve: 3 - Lead screw diameter: 25 mm Iaolhjv Iqr Ujccqrst - Thread: 6 mm pitch

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: MS0990, turning diameter over cross slide: 370 mm, spindle bore: 102 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 3,000 mm, spindle speed (max.): 1,800 rpm, Turning diameter in gap: 830 mm, rotational speed (max.): 1,800 rpm, type of input current: AC, quill mount: MK 6, three-jaw chuck diameter: 315 mm, faceplate diameter: 400 mm, Equipment: rotational speed infinitely variable, Colchester MASTIFF VS1800 Centre width 3000mm 2-axis digital display ACU-RITE 303 - including constant cutting speed Load display Continuously adjustable spindle speed in 3 speed ranges Multifix Gr.MC quick-change holder Islhccjv A If Ujqrsat Coolant system Schunk 3-jaw key bar chuck Ø315, passage Ø102 Pratt Burnerd 4-jaw face plate Ø405, passage Ø75 Traveling steady rest Ø10-110 Fixed steady rest Ø10-235; Ø156-380 Traveling center point MK6 Drill chuck for tailstock Ø5-20 Machine in accordance with CE

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Spindle speeds 20-3250 rpm Iaolhccsrx Rwnsqrjt Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Functionality: fully functional, Machine Name - Colchester Machine Model - Triumph 2000 Description - 3 Jaw Chuck Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post 2 axis Accurite DRO Gap bed Tailstock Ijlheuk H Rbsccqroat Coolant pump and tray

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Iolhccsv I Ddqjqroat Quick change tool post and 3 holders

Condition: good (used), center height: 190 mm, center width: 1,250 mm, overall weight: 1,500 kg, Lead and feed screw lathe Colchester -WAG 813 On offer here is a lead screw and feed screw lathe from Colchester Technical data: Manufacturer: Colchester Type: Triumph2000 Speeds: 25-2000 rpm Top height: 190 mm Center distance: 1250 mm Machine dimensions: (w x d x h) 1200 mm x 2500 mm x 1700 mm Ielhccqsr Iim Heroat Power connection / control voltage: 380 Volt General / technical data: Used lead and feed spindle lathe from English production with original Multifix tool holder system in good condition. The machine has a 3-axis digital readout. The machine also has a chip guard. Accessories / special equipment: Forkhardt wedge bar chuck (power chuck)

Condition: used, Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm Islhcerbm T Decqrjat -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm turning diameter over slide rest:165 mm turning length:635 mm total power requirement:2,2 kW :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm digital readout:Heidenhain Machine is in good condition. Accesssories like tool holders etc come with the machine Iaslhcsufud Rocqret

Condition: ready for operation (used), Functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg Iajlheu St S Ajccqrot

Condition: refurbished (used), Straight Bed Machine Distance between centers: 30" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse New 3 Jaw Coolant New 2 axis DRO Main motor: 7.5 hp Machine fully refurbished (Reground slideways) Chuck guard TBC Ielst Ifpqjhccqreat Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: ready for operation (used), Technical details: Center height: 170 mm Distance between centers: 650 mm Swing over bed: 350 mm Swing over cross slide: 196 mm Swing in gap: 535 mm Spindle hole: 42 mm Spindle nose: D1-4" camlock Spindle speeds: 3 ranges of: 0-340 rpm 0-1010 rpm 0-3250 rpm Motor main: 7,5 kW Bed width of ways: 318 mm Cross slide travel: 250 mm Tailstock quill diameter: 63 mm Tailstock travel: 145 mm Morse: MT4 Dimension of the machine: 1900 x 1100 mm Weight: 1350 kg Iajlhov Idzcoccqrjt Accessories/options: FAGOR DRO-system for 2-axis Tool holders Chuck Chuck jaws Steady Documentations Under power in our warehouse!

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, turning diameter over cross slide: 310 mm, turning length: 750 mm, Lathe is very useful with automated functions from control panel. Everything working as it should. Iajlhcewh Sq Dscqret

Condition: good (used), Colchester Mastiff Gap Bed Centre Lathe Maximum Distance Between Centres 1000mm Maximum Swing Over Bed 535mm Maximum Swing over Gap 810mm Spindle Bore 90mm Spindle Speeds 20-1400 rev/min Motor 12.5 HP Supplied with: Dual Dials Quick Change Tool Post 3 Jaw Chuck Ielhccqevllk Torsat Coolant New Digital Readout For sale with Jet Machinery Ltd Jet Machinery Stock No: #78850 Machine Serial Number: 8/0211/06270 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.  

Condition: used, Distance between centers: 660 mm or 1000mm ( to be confirmed ) Swing over bed: 300mm Swing over cross-slide: 200mm Spindle speeds: 22 to 1800 (16) Spindle bore: 40mm Full length screw cutting Chuck mounting: D1 – 4 Tailstock taper: 3 morse Ijlhewga Izeccqreat Execution: Metric calibration or Imp ( to be confirmed ) Tool post: quick change 4 holders & keys New 3 jaw chuck Chuck guard Coolant New Newall 2 axis DRO system Approx dimensions: 1400 x 1800 x 900mm

Condition: excellent (used), The machine is in good condition. Complete documentation is included. Islhcswi R R Socqroat Fanuc control system. Machine has driven tools.

Condition: good (used), Functionality: fully functional, spindle bore: 76 mm, turning diameter: 500 mm, center width: 1,500 mm, For sale is a Colchester Mascot 1600 lathe with a 3-axis Heidenhain digital readout and safety guards. The machine is fully functional, currently in our warehouse, and ready for shipment. Max. turning diameter over bed: 500 mm Ioljwhzlkshccqreat Max. turning diameter over support: 360 mm Center distance: 1500 mm Spindle bore: 76 mm Tailstock quill taper: MT 5 Tailstock quill travel: 230 mm Spindle speeds: 20 - 1600 rpm

Condition: used, Turning Diameter – 200mm Turning Length – 400mm Control Type – Fanuc OT Number Of Controlled Axis – 2 Bar Capacity – 50 Maximum Swing – 250 Tailstock – yes Bar feed – yes Islhccjwga H Doqreat Spindle Bore – 50mm Chucking Diameter – 150mm Number Of Tools Per Turret – 12 Spindle Speed – 3500 rpm

Condition: refurbished (used), Gap Bed Between centers: 100” Swing over bed: 22″ Spindle speeds: 18 – 1400RPM Spindle bore: 3 1/2″ Diameter Chuck mounting: D1 – 11 Tailstock taper: No 5 Morse Iaelhccswga Eysqrot Execution:TBC Tool Post: Quick Change 4 holders & keys 4 Jaw Chuck with standard chuck guard Coolant and Lovo light Fixed steady