Used Colchester Master Vs 3250 for sale (63)

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Spindle speeds 20-3250 rpm Misc. accessories Pgjlhsrx Rwnscdw Dok MARCELS MASCHINEN CH

Condition: good (used), Used COLCHESTER MASTER 3250 center lathe and feed spindle lathe center height 170mm center distance: 650mm spindle bore: 42mm Infinitely variable speed from 15-3250 rpm 1 x SCHUNK wedge bar lathe chuck Ø160mm 1 x MULTIFIX steel holder size B with 4 inserts Machine light, chuck protection electrically fused, machine shoes 1 x rotating center point, 1 x rotating center point with pressure indicator 1 x drill chuck with tapered arbor Polhcdwouqkf Ne Dsgk The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Pgolhcotr Ud Sjdw Dek Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: ready for operation (used), Technical details: Center height: 170 mm Distance between centers: 650 mm Pslhcdwjv Idzco Degk Swing over bed: 350 mm Swing over cross slide: 196 mm Swing in gap: 535 mm Spindle hole: 42 mm Spindle nose: D1-4" camlock Spindle speeds: 3 ranges of: 0-340 rpm 0-1010 rpm 0-3250 rpm Motor main: 7,5 kW Bed width of ways: 318 mm Cross slide travel: 250 mm Tailstock quill diameter: 63 mm Tailstock travel: 145 mm Morse: MT4 Dimension of the machine: 1900 x 1100 mm Weight: 1350 kg Accessories/options: FAGOR DRO-system for 2-axis Tool holders Chuck Chuck jaws Steady Documentations Under power in our warehouse!

Condition: ready for operation (used), lathe Colchester Master Pelhcdwod Hdqvo Degk

Condition: good (used), comes with a blue mobile cabinet with some spare parts Polhsv Rw T Djcdw Degk

Condition: good (used), Functionality: unexamined, turning diameter over cross slide: 178 mm, spindle bore: 35 mm, turning diameter: 280 mm, center height: 145 mm, turning length: 750 mm, total length: 1,700 mm, total width: 800 mm, total height: 1,800 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 70 rpm, overall weight: 800 kg, - Operating voltage: 380 V Polhcdev Iqr Usw Dogk - Frequency: 50 Hz - Rated current: 11 A - Spindle nose: D 1-3 - Morse taper in head sleeve: 3 - Lead screw diameter: 25 mm - Thread: 6 mm pitch

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: MS0990, turning diameter over cross slide: 370 mm, spindle bore: 102 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 3,000 mm, spindle speed (max.): 1,800 rpm, Turning diameter in gap: 830 mm, rotational speed (max.): 1,800 rpm, type of input current: AC, quill mount: MK 6, three-jaw chuck diameter: 315 mm, faceplate diameter: 400 mm, Equipment: rotational speed infinitely variable, Colchester MASTIFF VS1800 Centre width 3000mm 2-axis digital display ACU-RITE 303 - including constant cutting speed Pgolhjv A If Uocdw Djk Load display Continuously adjustable spindle speed in 3 speed ranges Multifix Gr.MC quick-change holder Coolant system Schunk 3-jaw key bar chuck Ø315, passage Ø102 Pratt Burnerd 4-jaw face plate Ø405, passage Ø75 Traveling steady rest Ø10-110 Fixed steady rest Ø10-235; Ø156-380 Traveling center point MK6 Drill chuck for tailstock Ø5-20 Machine in accordance with CE

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Pgslhcjnr Nl Sjdw Djk Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: ready for operation (used), Functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Pjlhcdwsu St S Ao Degk Weight: approx. 850 kg

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm turning diameter over slide rest:165 mm turning length:635 mm total power requirement:2,2 kW :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm digital readout:Heidenhain Pgelhcjufud Rjdw Dek Machine is in good condition. Accesssories like tool holders etc come with the machine

Condition: excellent (used), Swing over bed 400 mm Pgslhcdwsq Dll De Dsk Distance between centers 1250 mm Spindle speeds 0-2500 rpm Misc. accessories MARCELS MASCHINEN CH

Condition: used, Distance between centers: 660 mm or 1000mm ( to be confirmed ) Swing over bed: 300mm Swing over cross-slide: 200mm Spindle speeds: 22 to 1800 (16) Spindle bore: 40mm Full length screw cutting Chuck mounting: D1 – 4 Tailstock taper: 3 morse Execution: Metric calibration or Imp ( to be confirmed ) Tool post: quick change 4 holders & keys New 3 jaw chuck Chuck guard Coolant Pslhswga Izocdw Djgk New Newall 2 axis DRO system Approx dimensions: 1400 x 1800 x 900mm

Condition: ready for operation (used), Year of construction: 2004, Available immediately from location: Polhcdwswgclio Dsgk CNC Lathe Colchester Type Combi K 4 Year of manufacture 2004 CNC control Fanuc Series 210i-T Swing over bed 554 mm Center distance 2050 mm Swing in the gap 830 mm Swing over support 370 mm X-axis travel 290 mm Spindle bore 102 mm Drive power 18.5/22 kW Spindle speeds 4 – 1800 rpm Weight 5 tons Chuck, lynette, tool holder Parat with 31 inserts Price €9,750 plus VAT ex location

Condition: used, Functionality: fully functional, machine/vehicle number: 6/0008/08085, MACHINE SPECIFICATION Cont’d Poljwczcfshcdw Dsgk Diametral threads (21) 8 - 44 DP Metric pitches (39) 0.2 – 14mm Module pitches (18) 0.3 – 3.5 mod Sliding feeds, per rev. of spindle 0.0015 – 0.040” Surfacing feeds, per rev. of spindle 0.00075 – 0.020” Machine in Metric execution MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 Jaw chuck Quick change toolpost Chuck guard Coolant System Lighting Rear splashguard

Condition: used, Year of construction: 2021, COLCHESTER Tornado A90 CNC automatic lathe, No. T90241, built in 2001, max. 6,000 rpm, 12-station tool turret, FANUC 21i-T control, with COLCHESTER Tornado MBF 1000 bar loader Pgolhcdjwczcrjw Djk

Condition: good (used), COLCHESTER TRIUMPH 2000 190 x 1270 mm 2000 rpm Bar diameter 54 mm Camlock 6" 7.5 HP/5.6 KW Psljwcv H Eshcdw Djgk Weight 1180 kg Checked and functional machine and complete with accessories as shown in the photo Checked and functional machine and complete with accessories as shown in the photo

Condition: used, Year of construction: 2003, spindle bore: 52 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (min.): 4,000 rpm, bar diameter: 52 mm, The Colchester TORNADO A 90 lathe was manufactured in 2003. Spindle speed 4000 rpm, spindle bore 52 mm and spindle motor power 11 kW. It is equipped with a Fanuc 21 i control system, including a TORNADO MBF feeder. Polewc Ac Tohcdw Djgk

Condition: used, Turning Diameter – 200mm Turning Length – 400mm Control Type – Fanuc OT Number Of Controlled Axis – 2 Pslhcdwowga H Do Degk Bar Capacity – 50 Maximum Swing – 250 Tailstock – yes Bar feed – yes Spindle Bore – 50mm Chucking Diameter – 150mm Number Of Tools Per Turret – 12 Spindle Speed – 3500 rpm

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm control Fanuc 18i-TB max. helix angle 60 ° spindle bore 64 mm tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6 Pgslhcdwevzcplj Djk

Condition: good (used), Year of construction: 1985, Functionality: fully functional, machine/vehicle number: 9/0002A/00053, SPECIFICATION Centre height 315mm Distance between centres 1500mm Swing over bed 635mm Swing over cross slide 390mm Spindle bore (max. bar dia) 115mm Spindle nose mounting D1-11 Camlock Taper in spindle nose and tailstock barrel No. 6 Morse Swing in gap 900mm Width of bedways 480mm Total travel of cross slide 380mm Total travel of top slide over bedways 165mm Total travel of tailstock barrel 190mm Spindle speeds (24) 6.3 – 1250rpm Drive vee belt and clutches Spindle motor 15kW Whitworth threads (88) ¼ - 112TPI Diametral threads (41) 1-60DP Metric pitches (70) 0.2 – 112mm Module pitches (37) 0.3 – 24 MOD Machine in Metric execution Pjlhevupnhscdw Dogk   MACHINE EQUIPPED WITH Sino 2 axis DRO system 3 jaw chuck Quick change toolpost and 3 off toolholders High speed threading unit Bedstop Rotating centre Stationary steady Rapid power traverse to saddle Lighting Coolant system Chuck guard

Condition: used, total height: 1,700 mm, total length: 3,200 mm, total width: 1,100 mm, Empty weight: 2.500 kg Price: On request - Documentation available: No - Turning diameter: 450mm - Min. spindle speed: 20rpm - Center height: 225mm - Type digital: Mitutoyo KA-200 - Center distance: 2000mm - Max. spindle speed: 1600rpm - Bore diameter: 72mm - Digital: Yes - Transport dimensions: 3200mm x 1100mm x 1700mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 2 Pjlhjv N H Tdjcdw Degk Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: refurbished (used), Gap Bed Between centers: 100” Swing over bed: 22″ Spindle speeds: 18 – 1400RPM Spindle bore: 3 1/2″ Diameter Pjlhcewga Eyedw Djgk Chuck mounting: D1 – 11 Tailstock taper: No 5 Morse Execution:TBC Tool Post: Quick Change 4 holders & keys 4 Jaw Chuck with standard chuck guard Coolant and Lovo light Fixed steady

Condition: used, Year of construction: 2008, max. swing diameter over bed 510 mm max. turning diameter 260 mm Max. Turning length 540 mm travel -x axis 240 mm center height over bed 260 mm control FANUC 21i-TB spindle bore 77,5 mm no. of tools in turret 12 x tool taper VDI 40 CNC Lathe | COLCHESTER - TORNADO T8 The machine is in good condition. Please refer to further technical details in the attachement of the offer. A machine video will be shared on request. Pgjlhcsvzcqpedw Dek - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T 8 | T-8

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Polhcdsq N Ay Ajw Degk Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty