Used Demag Chain Hoist for sale (503)

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Hfedswz R Iuspfx Afpjn Delivery time: by arrangement Freight basis: ex-works

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Hodpfx Aowk Aw Hofpjfn Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Year of construction: 2007, condition: used, Offer 22111 Technical specifications: - HADEF Type CH 2 hoist, built in 2007, load capacity 500 kg - Portal load capacity 500 kg - Hook height approx. 2450 mm - 2 lifting speeds 8.0 + 2.0 m/min - Manual trolley - Clearance between the traveling columns approx. 2750 mm - Clearance height at the bottom edge of the portal beam approx. 2900 mm - Mobile beam approx. 1500 mm - 4 swivel casters - Total width approx. 3050 mm - Total depth approx. 1500 mm Hfedpfjv S Du Rjx Afpsn - Total height approx. 3050 mm - 400 V drive - Total weight – crane + hoist approx. 250 kg

Condition: good (used), Year of construction: 2005, Model: EL-EXIS S 100/420-310 DEMAG ERGOTECH- EL-EXIS E 1000/420-310 (130) Year of production: 2005 Controll: NC4 TECHNICAL DATA Screw Dia [mm]: 35 Shot Weight [g]: 150 Injection Pressure [bar]: 1865 Clamping Force [kN]: 1000 Tie Bar Distance [mm]: 420 x 420 Platen Size [mm]: 600 x 600 Hfedpfx Aetrzuqsfpjn Mould Height min. [mm]: 200 Machine tested

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD396, DEMAG KBK Crane Ceiling Crane Runway with dimensions approx. 19.5x7m (2x 7m bridge) Payload / Lifting Capacity: 2x 250 kg - 0.25 t Technical Data of the System: Runway made from Demag KBK2 rails, one side with KBKII-R rails featuring integrated power feed Hsdpsxdvn Ajfx Afpjfn System is supplied complete: KBK rails, rail connectors, trolleys, end plates, brackets/hangers etc. including 2 bridges, each 250 kg including 2x 250 kg Demag DC chain hoists Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping by freight carrier or collection only by appointment Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems available. Load capacities from 125 kg to 1600 kg Please inquire about your crane runway with required capacity and dimensions, non-binding.

Condition: excellent (used), Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc, conical brake disc, conical brake ring -Manufacturer: Demag, conical brake disc conical brake ring -Type: Mounting: Shaft Ø 46/50 mm -Bolt circle: Ø 70 mm M10 -Dimensions: see photos -Number: 2x brake disc available -Price: per piece -Dimensions: Ø 288 x 90 mm -Weight: 6.3 kg/piece Hfjdpfxsxc Ezcs Afpsn

Condition: used, Demag plasticising unit IU mm - removed from Demag Ergotech system 200-560-320 - removed from running machine - fully functional - displacement: 231 cm³ - injection pressure: 1855 bar - moulded part weight max. PS: 210 g - cylinder E: .01 mm, A: .01 mm   - screw E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø Hfodpjh Nv Itsfx Afpjn - 06--DEM-001 - year of manufacture 2005 - also suitable for IU320 and IU610 - nut and coupling must be exchanged manufacturer: Demag Dition: gebraucht

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Hfjdpfewk T Uiox Afpjn Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 1987, machine/vehicle number: 34, Ref. No. 25008 Technical specifications (approx.): - Load capacity: 250 kg - Outreach: 6.0 m - Hook height (approx.): 5.0 m - Wall flange height: approx. 820 mm - Flange width: approx. 400 mm - Hole pattern / hole spacing: approx. 720 x 325 mm - Slewing radius: approx. 180° Hfedpfxow Ddaij Afpsn Hoisting unit Manufacturer: DEMAG Type: PK 2 L Machine No.: 5710311 Year of manufacture: 1986 Technical specifications: - Load capacity: 250 kg - Lifting speed: 14 m/min - Drive: 400 V, 0.7 kW - Chain hoist operation via remote hand control - Manual slewing of the jib arm - Total weight: approx. 300 kg

Condition: good (used), Year of construction: 2006, Clamping force: 250 tons Distance between tie bars: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Dylight max: 1505 mm Screw diameter: 50 mm Hfjdpfergw Exsx Afpsn Shot volume: 530 cm3 Shot weight: 482 g Injection pressure: 2426 bar Cores- 2 Hot runners- 12 + Robot Demag ergotech W733-0174 Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max range: 1000 mm X- 900 mm Y-1400 mm Z- 2500 mm

Year of construction: 2001, condition: good (used), machine/vehicle number: KBK3, DEMAG KBK crane headliner crane runway dimensions approx. 20 x 9 m Track length can be combined variably !!! Any size is possible. Payload / lifting load 250 KG - 0.25to Technical data of the system: Crane runway made from Demag KBK2 rails, bridge made from KBK3 Hfodpfshvpzhjx Afpen Mounting height variable, chain length approx. 4 m The system is delivered complete: -KBK rails, rail connectors - Undercarriages, end plates, cable towing, holders/hangers, etc including bridge with Demag 0.25 to chain hoist Shipping by forwarding agency possible, collection preferred Demag KBK1 KBK2 and KBK3 rails are stock items! Dispatch by forwarding agent, please ask for postal code. Please ask for other dimensions or shipping prices, we will make you a non-binding offer immediately!

Condition: excellent (used), Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc Hfedpfx Aexc Ew Rsfpjn -Manufacturer: Demag, brake ring conical brake disc unused -Type: 624666 RIW -Dimensions: see photos -Dimensions: Ø 270 x 35 mm -Weight: 0.8 kg

Condition: used, Demag Ergocontrol, 4 MB- for NC4 control system - removed from Demag ET 6 system - removed from running machine - fully functionalmanufacturer: Demag Hfsdorr Ehmjpfx Afpen spare part no.: 7If the spare part is traded in exchange, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note due to the condition or age of the returned part. The defective part must be in a repairable condition, the credit note will be issued after feedback from the manufacturer. Dition: gebraucht

Condition: good (used), functionality: fully functional, Year of construction: 2008, load capacity: 125 kg, -KOM 3164- Offered here is a DEMAG industrial hoist. The hoist can lift loads of up to 125 kg. In addition to the hoist, you will receive the corresponding motor unit including the chain hoist, consisting of the chain and the hook block. Dimensions can be found in the last image. Type: DCM PRO 1-125 Year of manufacture: 2008 Number of load strands: 1 Chain: 4.2 x 12.2 RDC Hook travel: 2.8 m Hfjdpfsxcny Isx Afpsn Motor: ZNK 71 A 8/2 Protection class: IP 55

Condition: good (used), Year of construction: 1992, machine/vehicle number: 75, Offer 25002 Technical Data (approximate): - Load capacity: 250 kg - Outreach: 5.2 m - Hook height (approx.): 5.0 m - Wall flange height (approx.): 820 mm - Flange width (approx.): 400 mm - Bolt pattern / Hole spacing (approx.): 720 x 325 mm - Slewing radius (approx.): 180° Hedpfx Aew I Sw Aofpefn Hoisting unit Brand: DEMAG Model: PK 2 L Serial No.: 5710314 Year of manufacture: 1986 Technical Data: - Load capacity: 250 kg - Lifting speed: 14 m/min - Drive: 400 V, 0.7 kW - Chain hoist operation via pendant control - Jib slewing by hand - Total weight: approx. 300 kg - Transport length: approx. 5.8 m

Condition: excellent (used), Year of construction: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS robot / Hybrid Machine Year of manufacture: 2013 Hfedpfx Afoxd T N Depon Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Hardened injection unit - bimetallic Main motor of the machine - servo motor driven by inverter - energy saving Built-in printer Machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, safety enclosure Robot acquisition available at an additional cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine, or to take part in technical live tests at our facility in Łódź. Price: On request

Year of construction: 2002, condition: good (used), machine/vehicle number: SIKBK, DEMAG KBK crane sky crane runway dimensions approx. 10x6m Payload / lifting load 500 KG - 0.5 tons Technical data of the system: Crane runway made from Demag KBK2 rails The system is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carriers, holders/hangers, etc. incl. Demag DK2 500KG chain hoist Crane is dismantled and available immediately Used condition, see pictures Hfodpfxsmqf Nbs Afpjn Item location is 75053 Gondelsheim Dispatch by forwarding agent or pick-up only by appointment Demag KBK1 KBK2 and KBK3 rails are stock items! Other KBK systems are also available. Payload 125KG - 1600KG Please inquire about your crane runway with cantilever load and dimensions.

Condition: excellent (used), Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc -Manufacturer: Demag, brake ring conical brake disc unused -Type: KB 160 RIW -Dimensions: see photos -Dimensions: Ø 275 x 40 mm Hfjdoxc Ev Hspfx Afpsn -Weight: 1.0 kg

Condition: used, Year of construction: 2007, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, load hours: 67,000 h, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Hfsdpfx Afjwlkcaopon Payment terms: 100% before takeover of the machine, net

Condition: good (used), functionality: fully functional, -KOM 3161- Offered here is a load crane from Demag. The crane can lift up to 80 kg. In addition to the crane, you will receive the corresponding motor unit including the chain hoist, which consists of the chain and hook block. The dimensions can be found in the last image. Unfortunately, the type plate on the drive unit is no longer present. Hodpoxcnvpefx Afpjfn

Condition: good (used), Year of construction: 1987, machine/vehicle number: 33, Offer 25003 Technical specifications (approx.): - Load capacity: 250 kg Hfjdew I S Hkjpfx Afpen - Outreach: 6.0 m - Hook height (approx.): 5.0 m - Wall bracket height (approx.): 820 mm - Flange width (approx.): 400 mm - Hole pattern / hole spacing (approx.): 720 x 325 mm - Slewing radius (approx.): 180° Hoist Manufacturer: DEMAG Type: PK 2 L Machine No.: 5710310 Year: 1986 Technical data: - Load capacity: 250 kg - Lifting speed: 14 m/min - Drive: 400 V, 0.7 kW - Chain hoist operated via handheld remote control - Jib arm slewed manually - Total weight (approx.): 300 kg - Transport length (approx.): 6.5 m

Condition: excellent (used), Bridge crane, indoor crane, disc brake, crane brake, disc, drum and storm brakes, overhead crane brake, brake ring, conical brake disc Hfsdpfx Asxc Eupsfpjn -Manufacturer: Demag, brake ring conical brake disc unused -Type: 628 626 44 RIW -Dimensions: see photos -Dimensions: Ø 310 x 40 mm -Weight: 0.9 kg

Condition: used, Year of construction: 2008, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, load hours: 35,000 h, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Hodpfjwlkb Nsx Afpofn Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net

Condition: good (used), functionality: fully functional, Year of construction: 1992, main lifting speed: 12,000 mm/min, fine lifting speed: 2,000 mm/s, -KOM 3160- Offered here is a Demag load crane. The load crane has a lifting capacity of up to 80 kg. In addition to the crane, you will receive the corresponding motor unit, including a chain hoist consisting of a chain and hook block. The dimensions can be found in the last picture. Hfjdpfx Ajxcnmnsfpon Type: PM V8 V1 F6 Year of manufacture: 1992 Number of load strands: 1 Main lifting speed (m/min): 12 Fine lifting speed (m/min): 2 kW: 0.2 / 0.03 Protection class: IP 54

Condition: good (used), Electric motor, three-phase motor for gear motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor unfortunately without type designation -Power: kW -Speed: 1485 rpm Hjdpfx Aoxc Eiysfpofn -Shaft: Ø 24 x025 mm -Design: B14 -Dimensions: 370/180/H250 mm -Weight 19.8 kg