Used Wittmann Dryer for sale (69)

Condition: excellent (used), Year of construction: 2014, operating hours: 56,851 h, functionality: fully functional, clamping force: 1,100 kN, screw diameter: 25 mm, displacement volume: 86 cm³, plate length: 663 mm, plate height: 680 mm, total length: 4,570 mm, total width: 1,500 mm, total height: 2,130 mm, overall weight: 4,800 kg, Equipment: documentation/manual, Wittmann Battenfeld EcoPower 110-350 Stock No.: 503665 Manufacturer: Wittmann Battenfeld Type: EcoPower 110-350 Control: UNILOG B6P Year of Manufacture: 2014 Operating Hours: 56851 h Technical Data – Clamping Unit Clamping Force: 1100 kN Tie Bar Spacing h x v: 470 x 420 mm Platen Size h x v: 680 x 663 mm Minimum Mold Height: 200 mm Maximum Mold Height: 450 mm Maximum Mold Opening: 830 mm Opening Stroke: 380 mm Technical Data – Injection Unit Screw Diameter: 25 mm Iodpfoz A Dwmox Alzotl Injection Volume: 86 ccm Injection Pressure: 3000 bar Plasticizing Rate: 9 g/s PS Free Injection Flow Rate: 98 g/s PS Dimensions & Weight Machine Dimensions L x W x H: 4.57m x 1.5m x 2.13m Total Weight: 4800 kg Equipment Screen Text – German Screen Text – Multi-Language CEE Socket 16A Machine with Water Manifold Leveling Elements

Condition: used, Year of construction: 2006, functionality: fully functional, Equipment: documentation/manual, The DRYMAX desiccant dryer is for sale. Here are some technical details: The unit has also had the molecular sieve in both drying cartridges replaced. Dew point: up to -40/-60 degrees Motorized switching valve Energy-saving regeneration Ijdpfxsz Aytyo Alzetl SmartFlow Material protection function Fine filter for return air

Condition: used, Year of construction: 2007, functionality: unexamined, The Wittmann removal device is for sale; Iedpfoz Aniiex Alzetl X-axis: 550mm Y-axis: 1200mm Z-axis: 1500mm Voltage: 230V

Condition: used, Year of construction: 2006, Wittmann robot W721-0575 year 2006 Ijdpfxszg U I Hj Alzotl

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, overall weight: 50 kg, type of input current: three-phase, power: 12 kW (16.32 HP), year of last overhaul: 2026, Type: TP-DIRECT: 120 Iodjy Uvwbepfx Alzotl Power: 12 kW Maximum operating temperature: 120 °C Medium: Water Temperature control unit Three units available Price: 700 EUR per unit 10% discount when purchasing three units!!!

Condition: used, Year of construction: 2023, machine/vehicle number: 142597-100, overall weight: 3,000 kg, This Wittmann Battenfeld injection molding machine, type: SmartPower 60/210 Unilog B8, will be auctioned off online in our industrial auction / machine auction due to the business closure of Blochwitz Formenbau & Kunststofftechnik – including CNC machining centers, injection molding machines, machine vices, tool holders, and much more. You can find this and many other items on our platform. Itsdszy H Iropfx Alzjl

Condition: used, Year of construction: 2015, machine/vehicle number: 136666-100, overall weight: 4,600 kg, This Wittmann Battenfeld injection molding machine, type: SmartPower 120/525 Unilog B6P, will be auctioned online as part of our industrial auction / machine auction – business liquidation of Blochwitz Formenbau & Kunststofftechnik – including CNC machining centers, injection molding machines, machine vises, tool holders, and much more. You will find this and many other items on our platform. Itodpfxozy H Edo Alzel

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 400 mm, total length: 3,100 mm, total width: 550 mm, total height: 900 mm, overall weight: 80 kg, power: 0.18 kW (0.24 HP), input voltage: 380 V, input frequency: 50 Hz, input current: 3 A, Equipment: type plate available, Aluminum frame conveyor belt 310x40cm 8m/min speed sorting belt conveyor mobile aluminum frame horizontal conveyor belt for sale in excellent condition length: 3100mm belt width: 400mm full width: 480mm speed: 8meters/min drive: geared motor 0.18kw 50Hz belt material rubber fabric green color. Itedpsydp Tgsfx Alzsl frame material aluminum profile. height: 820mm adjustable/tilting legs braked wheels.

Condition: excellent (used), Year of construction: 2019, Wittmann Battenfeld EcoPower 110/350 / All-Electric Machine / Operating hours: approx. 15,000 in automatic mode Year of manufacture: 2019 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosage volume: 168 cc Clamping Unit: Clamping force: 110 t Tie bar spacing: 470 x 420 mm Platen size: 682 x 682 mm Ejector: electric Clamping unit: toggle lever Control system: UNILOG B8 - Touchscreen Additional features: Machine in excellent technical condition All-electric machine: energy-efficient and very quiet Operating hours: approx. 15,000 in automatic mode Total operating hours: 21,800 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control system Injection unit is wear-resistant and corrosion-resistant Central lubrication Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91 x 1.42 x 2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request Ijdpfszy Ilrex Alzstl

Condition: used, Year of construction: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection unit: Screw diameter: 50 mm Injection weight: 402.2 g Injection pressure: 1,714 bar Shot volume: 442 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 520x470 mm Dimensions of platens: 760x755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total operating hours: 36,714 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Iodozy Ilfspfx Alzstl Injection unit is wear-resistant and corrosion-resistant Main drive motor - servo motor driven by inverter - energy saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82x1.42x2.20 m All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2015 Injection Unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2743 bar Dosage volume: 193 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Itsdpfezy Ikzex Alzjl Additional equipment: Vertical injection moulding machine with rotary table Hybrid machine: high-speed, energy-saving, and very quiet Air valve x 5 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1500 mm Rotary table driven by a servomotor, controlled by an inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: used, A Wittmann temperature control unit is for sale Medium: water Heating capacity: 7 kW Cooling capacity: 56 kW Itodpfx Asxx R Sxelzel Operating temperature: max. 90°C

Condition: excellent (used), Year of construction: 2009, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 710 mm, injection pressure: 2,070 bar, injection weight: 981 g, mold height (min.): 225 mm, Clamping Unit • Clamping force: 3000 kN (300 t) • Distance between columns: 710 x 710 mm – special design, increased distance compared to the standard version • Mold height: min. 225 mm / max. 1125 mm • Opening stroke: 900 mm • Maximum distance between mounting plates: 1125 mm Iodpfx Alezxfg Rezetl • Mounting plate size: 1030 x 1020 mm (920 mm) • Special hole pattern in the clamping plate and nozzle plate – made to order • Manual device for removing the upper column, with a removable cover in the front guard and a wrench for the column nut Injection Unit • Injection unit 2250 • Screw diameter: 65 mm, L/D ratio 22.0 • Shot volume: 1078 cm3 • Maximum injection weight (PS): 981 g • Specific injection pressure: 2070 bar • Equipment package: wear and corrosion-resistant plasticizing unit, adapted for processing PP and PPSU, diameter 65 mm • Hart-PVC package: without internal screw cooling, with external cylinder cooling instead of standard design • High-temperature heating bands for a working temperature of 450 °C • 8 standard open nozzles, plus: 4 for the PVC cylinder and 4 for the PP cylinder, through holes 4, 8, 10, and 12 mm • Wrench for screw tip for a 65 mm diameter UNILOG B6S Control System - Upgrade package • Controller with increased computing power • APS and cycle time analysis • Four freely configurable network connections • Userpage and notepad • Real-value graphics with 16 curves • Event log depth: 10,000 events • Quality table memory depth: 10,000 events • Four envelope curves, foil function keys • SPC evaluation and trend charts • Injection, holding, and back pressure controlled by a servo valve Hydraulics and Hydraulic Cores • Core movement and parallel ejection are performed by an additional DFEE pump, size 71, flow rate 95 l/min • 4 x hydraulic core for the clamping plate NW 10 (on/off valve), interfaces according to EUROMAP 13, with active ejector plate protection • Cores mounted on the upper side of the clamping plates, each with connections for two consumers • 2 x core junction box in a special design: 25 3-pole Amphenol plugs, mounted on the clamping plate on the operator side and the rear side, connected in series • 4 x core pressure relief upon emergency shutdown, engine stop, and after pressing the button in setting mode – relief occurs simultaneously for cores on the clamping side and the nozzle side • 4 x twin check valve for NW 10 core • 2 x pneumatic valve for controlling one closing nozzle in the mold or several in parallel (1000 l/min), mounted in the center console at the rear of the machine Mold Heating, Electrical System, and Connections • 12 x temperature control circuit for hot runner or mold heating, power 2.3 kW, 10 A, interface according to HASCO standard (1 x HASCO 24-pole for max. 6 zones) • Mounting location for heating circuits: center console at the rear, near the control cabinet • 2 x Schuko 16 A socket: under the control system and on the clamping side from the rear, under a cover • 2 x CEE 16 A socket: on the injection side from the front and on the clamping side • Dual power supply: 1. power supply 3P+N, 400 V, rated current 140 A, preliminary protection gL-gG 160 A • 2. power supply 3P, 400 V, rated current 98 A, preliminary protection gL-gG 100 A

Condition: excellent (used), Year of construction: 2004, Dryer Wittmann Iodpfx Aleumnknszstl Drymax C30-30-P Year 2004 Conveyor units year 2005 2 pieces available

Condition: excellent (used), Year of construction: 2014, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Itjdpfx Aozw D Nuelzjl Weight: approx. 95–120 kg

Year of construction: 2000, condition: good (used), Wittmann Teachbox Tested , fully functional Itodpfxozw D Epe Alzol

Year of construction: 2005, condition: new, Wittmann TP-PRIMUS C:90 Tempering Unit (2x) (2005) Itodpozw D Anefx Alzjl

Year of construction: 2012, condition: excellent (used), Years: Itsdszw Dz Rspfx Alzol 1x 2012 1x 2011 1x 2010 1x 2006 2x 2008 (Is possible to buy 6 pieces)

Condition: excellent (used), Year of construction: 2010, Model: Wittmann Tempro TP+D-S-2:160 Iodpfozw Drvox Alzjtl Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8Q00001264, For sale is a powerful and precise Wittmann linear robot W822-1264 for injection molding applications and automation tasks. The unit is packaged and secured on a Euro pallet and comes with the matching handheld device (teach pendant), emergency stop buttons, cabling, and the original technical documentation. The unit is in good condition and fully functional after disassembly. Technical data (according to the nameplate): Manufacturer: Wittmann Kunststoffgeräte GmbH (Vienna, Austria) Model / Type: W822-1264 Article number: 8Q00001264 Year of manufacture: 2015 Payload: 15 kg Itsdpfx Alszu Rzfszjl Travel distances / stroke (X / Y / Z): X-axis (ejection stroke): 550 mm Y-axis (vertical stroke): 1200 mm Z-axis (lateral stroke / main axis): 2500 mm Supply voltage: 360V – 400V (50/60 Hz, 3PH/N/PE) Connected load: 1.9 kVA Weight: 275 kg Scope of supply & components: - Main unit / linear robot Wittmann W822-1264 - Pneumatic / gripper head with C-axis / swivel function and pneumatic valve blocks (SMC). - Including energy chains / drag chains for organized cable and hose routing. - Control system & operating unit - Original Wittmann Teachbox R8 / touch-screen handheld device with protective housing. - Additional handheld unit with emergency stop switch and function buttons. - External button boxes / control elements (including EMERGENCY STOP, quality control part, etc.). - Complete cabling, oil cooler control lines, Harting multi-pin connectors, and pneumatic hoses. - Original folder "Wittmann Technical Documentation" (including circuit diagrams, operating manual, and documentation). Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you further. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Year of manufacture: 2017 Serial number: 138337-100 Itjdpfezvwirox Alzsl Machine with Wittmann robot Clamping unit • Clamping force: 9,000 kN / 900 t • Opening force: 300 kN • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t

Condition: ready for operation (used), Year of construction: 2010, A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible. Itsdpfoy N Ddlsx Alzel

Condition: good (used), functionality: fully functional, The Wittmann temperature control unit is for sale: Isdpjztwt Eefx Alzotl Medium: Water Heating capacity: 9 kW Cooling capacity: 30 kW Mobile

Condition: good (used), functionality: fully functional, Item no.: 1000003857 Used conveyor belt - 7,100 mm Technical Data: Manufacturer: WITTMANN Year of manufacture: unknown Overall dimensions: 7,100 x 1,200 x 1,300 mm (LxWxH) Width incl. cheek: 1,100 mm Side panel height: 40 mm Width incl. drive: 1,200 mm Isdpfxjtnf N To Alzetl Conveyor length: 7,100 mm Conveyor width: 1,000 mm Belt type: PVC, smooth Belt width: 1,000 mm Substructure: incl. supports (H: 700 to 1,000 mm) Motor: Gear motor Motor data: SEW, 0.12 kw, 50-60 Hz, 230-400 volts Conveying speed: 0.1 m/s, constant Special features: 16 mm drive shaft, side guide (H: 40 mm) Condition: Used / fully functional Function test: Ok

Condition: good (used), functionality: fully functional, overall weight: 10 kg, Manufacturer: Wittmann Series: DFR-101 Type: DF04TA Ijdpfjzt Rvmjx Alzstl 5 sections