Used Demag Motor for sale (577)

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Tsdpfxoptlbls Ai Tod Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece

Year of construction: 1998, condition: excellent (used), machine/vehicle number: TH20010018, Demag bridge crane, crane canopy, crane track, indoor crane, crane Payload / lifting capacity max. 3.2t - 3200KG, track 13300mm Outer dimensions with head carriage approx. 13500mm Crane with FU control and servo motors!!! 2x Demag DH rope hoist with floor and radio control RC-J for individual or tandem control of both hoists Height from top edge of crane to hook approx. 900mm Head carriage length with buffer approx. 2500mm Lifting height of rope hoist 6000mm Weight approx. 3200KG incl. 2x 25m guide rails HEB400 (400x300mm), incl. power rails!!! Beam lengths per side: 1x approx. 15m 1x approx. 10m Support spacing 10/10+5m Tjdpfov A Rr Djx Ai Tjd Crane is dismantled, immediately available from location 75053 Gondelsheim Very good used condition ----- Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire about postcode Collection preferred

Condition: like new (used), functionality: fully functional, machine/vehicle number: 94447285, Year of construction: 2023, lifting height: 4,000 mm, chain length: 4,000 mm, load capacity: 500 kg, lifting speed: 75 mm/s, fine lifting speed: 18 mm/s, power: 0.49 kW (0.67 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, For sale is a like-new, immediately ready-for-use Demag electric chain hoist, including a matching aluminum track (3.8 m), trolley, and a professional Demag wireless remote control. The system was manufactured in June 2023 and is in excellent, well-maintained condition. Technical data (chain hoist): Model: Demag DC-COM 5-500 (1/1 H4 V4.5/1.1) Year of manufacture: 06/2023 Load capacity (SWL): 500 kg (0.5 t) Hook travel / chain length: 4.0 m (4000 mm) Lifting speeds: 4.5 m/min (main speed) / 1.1 m/min (fine lifting speed) Motor power: 0.49 kW / 0.10 kW Operating voltage: 3 ~ 380–415 V / 50 Hz Protection class: IP 55 Tedpfx Aezxg T Eji Tod Features & scope of delivery: Demag electric chain hoist with chain and load hook Aluminum track (length: 3.8 m) including trolley Demag wireless remote control (handheld transmitter) for precise and wireless operation Including the corresponding charging unit/power supply and connection cable Ideally suited for workshops, warehouses, or assembly workstations where precise and safe lifting is required. Inspection is possible by arrangement.

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Todpfxjwlkb Ne Ai Ted

Year of construction: 2024, condition: new, Suitable for Demag chain hoist (DK 1, DKUN 1, DS1 125-250Kg) / KD63 motor / DRF200 friction drive Tedpeq U Iitsfx Ai Tsd Replacement fan cover / fan cover - not an original part! OEM part number 12481133 Larger quantities are also available - please inquire. NEW, unused Item location is 75053 Gondelsheim See pictures

Condition: new, functionality: fully functional, machine/vehicle number: 09550933, Year of construction: 2025, input voltage: 400 V, For sale Hoist motor NEW KBH225 B6 DH2000 Demag id nr: 09550933 for a DH2000 wire rope hoist NB! Tsdpfoyw T Hrsx Ai Tsd we have more than 15,000 Demag parts in stock see our website or other ads

Condition: excellent (used), For sale: a Mannesmann Demag geared motor with an angular gearbox, fully functional and ready for operation. The unit has been inspected and is in good technical condition. Normal signs of wear and tear resulting from use are visible. Todpfxsz Snn Se Ai Tod Technical data: Manufacturer: Mannesmann Demag Motor type: UMF71BX-6-7 Gearbox type: S040-B5-21-3 Motor power: 0.25 kW Power supply: 3×220/380 V Frequency: 50 Hz Motor speed: 890 rpm Output speed: 64 rpm Gear ratio: i = 14:1 Protection rating: IP54 Insulation class: B

Condition: good (used), Geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: DEMAG, geared motor type 13/6 PF 8/2 -Power: 0.07/0.27 kW -Speed: 680/2900 rpm Tsdpez Anwtjfx Ai Tod -Wave: see photos -Protection rating: IP54 -Dimensions: 270/210/H235 mm -Weight: 12.7 kg

Condition: new, functionality: fully functional, power: 3.1 kW (4.21 HP), rotational speed (min.): 725 rpm, rotational speed (max.): 1,450 rpm, Demag motor KBA140 B8/4 Duty cycle: 40/40% Price upon request 3.1 / 6.2 kW 725 / 1450 rpm Tjdpfx Aozqtg Nsi Tod 15.2 A 400 V 50 Hz Long shaft version. Condition: New or fully overhauled.

Condition: good (used), Geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: DEMAG, geared motor type 13/6 PKF 12/4 -Power: 0.05/0.17 kW -Speed: 450/1440 rpm -Shaft: Ø 14 mm -Protection rating: IP54 Tsdpfszmfc Iox Ai Ted -Number: 2 geared motors available -Price: per piece -Dimensions: 270/210/H220 mm -Weight: 12.8 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 34,007 h, functionality: fully functional, Equipment: documentation/manual, DEMAG 280 ton injection molding machine Tedpfx Ae Ad Ii Aoi Ted

Condition: excellent (used), Year of construction: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection unit: Screw diameter: 18 mm Injection weight: 20 g injection pressure: 2400 bar Dosing volume: 22.8 ccm Clamping unit: clamping force: 25 t tie bar distance: 280x280 mm size of clamping platens: 410x410 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Air valve x 2 Tedpfxoz Iqlbe Ai Tjd Hydraulic core pull x 1 Injection unit hardened - bimetal Original Demag mold crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2600 kg Length/width/height: 3.20x1.30x1.80 m Drive: Pumps/motor: 7,5 kW Heating power: 3,7 kW Total power: 11,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), For sale: Mannesmann Demag S040-B5-21-3 geared motor with a three-phase UMF71BX-6-Z motor, 0.25 kW. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good, with normal signs of wear and tear from use. The robust gearbox and reliable motor make this geared motor ideally suited for driving conveyors, feeders, production machines, and other industrial equipment. Technical specifications: Manufacturer: Mannesmann Demag Todpfx Ajz Snn Hji Tjd Gearbox type: S040-B5-21-3/ Motor type: UMF71BX-6-Z Motor power: 0.25 kW Power supply: 3× 220/380 V, 50 Hz Motor speed: 890 rpm Output speed: approx. 64 rpm Gear ratio: i = 14 Current: 1.56 / 0.90 A Power factor: cos φ 0.73 Protection rating: IP54 Insulation class: B Lubrication: synthetic oil Country of manufacture: Germany

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: HN-ALU, DEMAG ALUMINUM overhead crane, span approximately 3x2m Load capacity / lever load: 500 KG - 0.5 tons Technical data of the system: Crane track made of Demag aluminum rails, 180mm The system is delivered complete: Rails, travel units, end plates, cable carrier, etc. Includes a 500kg Kito chain hoist. The crane is disassembled and immediately available. Very good condition, see pictures. The item is located in 75053 Gondelsheim. Tedpfez Tdftex Ai Tjd Shipping via freight forwarder or collection by appointment only. Demag KBK1, KBK2 and KBK3 rails are in stock! Demag KBK systems are also available. Load capacity 125KG - 1600KG. Please inquire about your crane track with overhang load and dimensions.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1977, load capacity: 10,000 kg, working height: 6,000 mm, Equipment: documentation/manual, DEMAG 10,000 KG double-girder overhead crane. - Span: 17,330 mm - Lifting capacity: 10,000 KG - Lifting height: 6 m Tjdpfxo Afupls Ai Tjd - Year of manufacture: 1977 Delivery, customization, installation, inspection, and commissioning are all possible upon consultation. If this crane is not exactly what you are looking for, we have more than 100 cranes and over 3,000 m² of parts in stock. Not all stock is listed online. Please call or email if you have any questions. We sell, among other things: - Overhead cranes - Underslung cranes - Column and swivel cranes - Chain hoists - Demag KBK rails and accessories - Vahle conductor bars Keywords: overhead crane, hall crane, Abus, Demag, Kone, Konecranes, Stahl

Condition: used, Year of construction: 2000, screw diameter: 95 mm, clearance between the columns: 1,000,900 mm, injection pressure: 1,832 bar, injection weight: 2,550 g, mold height (min.): 450 mm, ejector force: 138,000 N, ejector stroke: 300 mm, plate length: 1,450 mm, plate width: 1,350 mm, total length: 10,100 mm, total width: 2,500 mm, total height: 2,600 mm, overall weight: 33,200 kg, Demag Ergotech 650/1000-5200 system Year of manufacture: 2000 Control system: NC4 Injection unit 5200 - Screw diameter: 95 mm - Specific injection pressure: 1832 bar - Injection volume: 2835 ccm - Injection shot weight: 2550 g - Pump motor power: 74 kW - Cylinder heater power: 43 kW - Screw L/D ratio: 20 Mold closing unit 6500 - Clamping force: 650 t - Mold plate dimensions: 1450 x 1350 mm - Distance between tie bars: 1000 x 900 mm - Ejector force: 138 kN - Mold height: 450 mm - Opening stroke: 930 mm - Maximum mold plate distance: 1880 mm - Ejector stroke: 300 mm Electrical connection (fuse): 1300 A Weight: 33200 kg Dimensions (m) length x width x height: 10.1 x 2.5 x 2.6 m Equipment: - NC4 control system with color screen - Screw Ø 95 mm, L/D 20 - Injection, holding, and packing pressure adjustable by servo valve - Core pull system with 4 circuits on proportional valves on the moving platen - Hot runner control with 8 zones - Hydraulic control for hot runner nozzles (1 valve) - 10-circuit water distribution manifold with temperature indication - Pneumatic ejector - Additional fine oil filter in the bypass Tjdpfxe Adp Elo Ai Tsd - Interface for a host computer

Condition: good (used), Electric motor, three-phase motor for geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane -Manufacturer: Demag, crane motor brake motor type KBV 71 A 2 -Power: 0.2 kW -Speed: 2550 rpm -Shaft: Ø 14 x 25 mm -Design: B14 Todpfx Aezmfm Tei Tjd -Dimensions: 275/138/H210 mm -Weight 10.2 kg

Condition: used, Year of construction: 2006, Demag Modular 250/560-1450 Euromap size: 2500-1450 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (1450) Screw diameter: 70 mm L/D ratio: 20 Injection pressure: 1400 bar Stroke volume: 1039 cm³ Shot weight (PS): 940 g Max. dosing stroke: 270 mm Max. nozzle stroke: 400 mm Tedez D Tnqjpfx Ai Tjd Nozzle penetration depth: 20 mm Nozzle contact force: 110 kN Barrel heating power: 27.0 kW Electric screw drive (WA): 30 kW Hopper capacity: 110 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 57 kW (64 kW with electric screw drive) Dry cycle time (EUROMAP 6): 2.35 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 11200 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.2 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: good (used), 2 lifting motors/chain hoist without suction lifter Length: 13000 mm Width: 5600 mm Height: 3250 mm Motor 1 lower edge: 3040 mm Tedpfx Ajxaubaei Ted Motor 2 lower edge: 2970 mm

Condition: good (used), Year of construction: 2001, Demag Ergotech 250/560-840 Euromap size: 2500-840 CLAMPING UNIT Clamping force: 2500 kN Locking force: 2750 kN Max. opening stroke: 575 mm Min. mould height: 310 mm Max. mould height: 660 mm (760 mm with WA) Max. distance between platens: 1235 mm (1335 mm with WA) Platen size (H x V): 830 x 830 mm Distance between tie bars (H x V): 560 x 560 mm Max. mould weight: 2500 kg Max. mould weight on moving platen: 1700 kg Todpoz D Ttgjfx Ai Tod HYDRAULIC EJECTOR Ejector stroke: 180 mm Ejector force: 69 kN Ejector retraction force: 31 kN INJECTION UNIT (840) Screw diameter: 45 mm L/D ratio: 20 Injection pressure: 2402 bar Stroke volume: 358 cm³ Shot weight (PS): 320 g Max. dosing stroke: 225 mm Max. nozzle stroke: 400 mm Nozzle penetration depth: 20 mm Nozzle contact force: 80 kN Barrel heating power: 13.0 kW Electric screw drive (WA): 20.5 kW Hopper capacity: 70 l GENERAL Oil tank capacity: 500 l Pump motor: 30 / 37 kW Total installed power: 43 kW (50 kW with electric screw drive) Dry cycle time (EUROMAP 6): System: 2.35 s – 392 mm / 2.25 s – 392 mm; Concept: 2.25 s – 392 mm / 2.25 s – 392 mm Net weight (without oil): 10700 kg Dimensions (L x W x H): 5.7 x 1.7 x 2.1 m (length without injection unit overhang) Noise level: 74 dB(A)

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Payment terms: 100% net before taking delivery of the machine Delivery time: by arrangement Freight basis: ex-works Todpfx Aswz R Iusi Tsd

Condition: good (used), functionality: fully functional, lifting height: 10 mm, load capacity: 25,000 kg, For sale: Components for hoist P1600 / P2000 Main hoist motor 36/20 K6P P1600/P2000 Fine Gear FG36 Hoist gearbox P1600 / P2000 P2000 housing H20 P1600/ P2000 rope drum H20 P2000 bottom block 4/1, 25t, 20mm rope P2000 rope guide Traverse / sheave - rope pulley All parts in TOP condition Tedpfev Uvftjx Ai Tod Load capacity 25,000 kg / 25 t. Hoist motor 36/20 K6P Fine gear FG 36 20 hoists available for sale 2-stage trolley travel Fully functional Well below OEM list price

Condition: used, Year of construction: 2007, operating hours: 67,000 h, clamping force: 250 kN, displacement volume: 530 cm³, injection pressure: 2,426 bar, overall weight: 14,200 kg, screw conveyor diameter: 50 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Payment terms: 100% before takeover of the machine, net Tjdpfx Aiswlkcaj Ted

Condition: used, functionality: fully functional, Year of construction: 2003, machine/vehicle number: TD2002/0368, DEMAG KBK overhead crane system with dimensions approximately 9x4m (4m span) Load capacity / lifting capacity: 800kg - 0.8t Technical data of the system: Overhead crane system with Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, carriages, end plates, supports/hangers, etc. Includes 1 bridge with a load capacity of up to 1000kg Includes 800kg Demag DK chain hoist Crane is disassembled and immediately available Very good condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection only by prior appointment Tjdpfxsz Tc Nwo Ai Ted Demag KBK1, KBK2 and KBK3 rails are in stock! Other KBK systems are also available. Load capacity 125kg - 1600kg Please request a non-binding quote for your overhead crane system, specifying the load capacity and dimensions.

Condition: used, DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Girder (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit, which is rigidly connected to the load handling device, the operator only needs one hand to operate the chain hoist and guide the load. Application High-quality and sensitive parts can be lifted, lowered and positioned more gently and safely. Installation processes and assembly operations can be controlled more precisely. Lifting movements can be carried out much faster thanks to the almost twice as high nominal speed per lift in the partial load range. Design - plug and lift - all electrical connections of the chain hoist are pluggable - with a foldable, universal suspension bracket, the hoist can be easily attached to the frame - fatigue-free operation thanks to the ergonomically optimized and robust DSC control switch - quick change of the entire chain drive without disassembly of motor or gearbox parts - contactor control 24 V, protection class IP55 - operating hour counter - limit switch for upper/lower hook position - high safety and long service life thanks to the speed-monitored brake/slip clutch principle Tedpjhwd E Njfx Ai Ted Advantage - One-hand operation, i.e. the control unit is located above the part to be handled (left- and right-hand operation via rocker switch) - Quick-change coupling enables universal use through easy exchange of the various load handling devices Technical data Brand DEMAG EAN 4039247450527 Manufacturer Article Number 93200146 Load capacity 80 kg Lifting height 2.8 m Lifting speed control In 2 stages Lifting speed fine lift 4 m/min Lifting speed main lift 16 m/min Number of load strands 1 piece Overall height (H) 694 mm Length 422 mm Depth 268 mm Model DCM-Pro 2-80 V16/4 Control unit GSA Type 4 Color Azure blue RAL 5009 Mandatory testing according to DGUV (UVV) Yes Delivery unit 1 Gross weight 25.000 kg Range of movement: 3 meters to the side and 2 meters forward/backward Condition: used You can find more items - new and used - in our shop! International shipping costs on request!