Used Ge Ultrasound for sale (48)

Condition: new, maximum load weight: 9,840 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website. Excerpt from the equipment list. Complete specification available upon request. Chassis: * Steel welded construction with welded longitudinal beams and perforated Z-cross members * Tight cross member spacing for high floor load capacity * Ramp storage between the longitudinal beams behind the axle assembly * Two insertion pockets for one loading ramp each located below the loading floor, with closing plate in the rear end frame Front Support: * Support winch with single-side operation Drawbar Equipment: * Height-adjustable rigid drawbar with bolted towing eye approx. 40 mm according to DIN * Height adjustment +/- 150 mm Rear Support: * Two adjustable drop legs Running Gear: * 2 x 7 t air suspension axle assembly, make: SAF * Drum brakes approx. 300 x 150 mm * Wheel connection 10-hole, center-bolted for single tires * Total air suspension lift approx. 180 mm, of which lift approx. 150 mm and lower approx. 30 mm * Control via hand lever with latching function Tyres: * 4 x 285/70 R 19.5 – manufacturer at our discretion * On 8.25 x 19.5 steel rims, manufacturer at our discretion Splash Protection: Itedpsxc Axxsfx Ahuob * PVC mudguards in front of and behind the axles * In accordance with EU regulations with rear mudflaps Load Securing: * In the outer frame, a lashing rail for tension belts every approx. 200 mm, lashing force approx. 2.5 t * 6 pairs of foldable lashing rings evenly distributed, lashing force approx. 8,000 daN * Stake pockets for insert stakes 80/50 * 3 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets transverse to the loading area, evenly distributed Brake System: * Air brake system according to EU regulations with EBS and a red/yellow coupling head each on the connection plate at the drawbar * As a connection to the towing vehicle, a double-coil with 1 coupling head red/yellow and 1 duomatic coupling * Spring-actuated parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor inlaid in the outer frame * Wheel arch area with sheet metal covering * Floor capacity: forklift driveable up to approx. 5 tons Container Locks: * Container locks for 1 x 20 ft. container according to ISO 1496, EN 284 or EN 452-1 * Additional container locks for 1 x 10 ft. at the front according to ISO 1496, EN 284, or EN 452 Lighting: * Lighting system according to EU regulations, 24 Volt * Multi-chamber rear lights, license plate lights, side marker lights, and contour marker lights at the rear * Connection plate at the drawbar including connecting cable with 15-pin and 2 x 7-pin plugs Accessories included: * 1 plug-in rotating beacon at the rear with registration for continuous light * Additionally, with switch: 2 LED reversing lights at the rear on lamp bracket, operated via reverse gear * Side and rear welded forklift bump stops * 1 stainless steel toolbox each left and right behind the axles * 6 x 25 cm side boards (3 per side) and front/rear wall made of anodized aluminum hollow sections, approx. 600 mm high * Side boards foldable and removable, removable Kinnegrip stakes (internal width approx. 2,480 mm) * Sideboard/stake magazine at the front on the front wall * 1 additional mounting plate including parking sockets for air/electricity/EBS Painting: * Chassis hot-dip galvanized * Side boards RAL 9010 Pure White * Hubs KTL-Black * Rear underrun guard RAL 9010 White * Rims RAL 9006 Silver * Vario

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized Itjdpfxougqvfo Ahuob * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Iedpsw U H Sbefx Ahuetb Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: used, empty load weight: 10,850 kg, overall weight: 65,000 kg, axle configuration: 4x2, first registration: 06/2005, tire size: 235/75 R17,5, wheelbase: 1,310 mm, color: yellow, Equipment: ABS, Drum brake Payload: 54,150 kg Air-lift suspension Telescopic up to 6,300 mm Max. total length: 19,450 mm Extendable to 3,000 mm Gigant axles 3rd and 4th axle steered trailing axles Lifting and lowering device Itsdoxuf Dnopfx Ahuob Errors excepted

Condition: used, Year of construction: 2015, Extendable superstructure: Yes Iedpfxexix Ags Ahustb Please contact Theo Lelie for more information

Condition: excellent (used), Year of construction: 2010, operating hours: 500 h, Natural gas turbine GE ( General Electric ) Iodpfx Ahsxni Ansustb Model - Frame 9E YOM - 2010 Frequency - 50 Hz Power - 127 MW This power plant is in excellent condition because it was used only like SUPPORT unit. So, it's coming with only approx. 500 working hours. NOTE - Also, it's important to mention, it's designed in way that with not so big investment you can increase the power up to 180 MW. Please contact us for more details. Thank you!

Condition: new, maximum load weight: 34,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through cross members, designed for high floor or point loads, equipped with a heavy-duty outer frame * Loading platform at the rear as a welded steel construction, with two welded-in outer driving rails made of 5-hole steel plate (Lohr/Rolfo hole pattern system) approx. 2,250 mm in length, hydraulically lowerable by approx. 350 mm * Rear section includes a hydraulically extendable loading table (approx. 1,500 mm), constructed from welded steel with 5-hole steel plate (Lohr/Rolfo hole pattern system) cover, lighting brackets, and two ramp compartments and ramp supports * Drive and control of the rear operated via electric-hydraulic power unit housed in a stainless-steel box mounted on the left of the chassis, with radio remote control * Power supplied by the towing vehicle’s battery (NATO socket on the front wall, without connecting cable to the truck) Towing Device: * 2" king pin, replaceable from below Underrun Protection: * Fixed as per EU standard Landing Legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 9 t air suspension axle assemblies * Brand: SAF, disc brakes approx. 370 x 45 mm * ABS * 10-hole hub-centric wheels, offset ET120 * Total air suspension travel approx. 310 mm (lifting approx. 220 mm, lowering approx. 90 mm) * Air suspension controlled via hand lever with stop function Lift Axle: * 1st and 3rd axles automatically liftable, can also be actuated from the chassis frame or via PIN 12 of the lighting socket Tires: * 6 units, 445/45R19.5, fitted on 14.00X19.5 rims, 10-hole ET120 Mudguards: * As per EU regulations, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Brand: Wabco * Dual-line brake system as per EU with EBS, automatically load-dependent control * Spring-operated parking brake acting on 2 axles * Interchange-proof coupling heads fixed to the front cross member, no connection to towing vehicle Lighting System: * As per EU regulations, 24V, * Multi-chamber rear lights, * License plate lights * LED side marker lights * LED front position light (white) and rear track lights * 15-pin socket and 2x7-pin sockets fixed at the front cross member, no cables to towing vehicle Load Securing: * 9 pairs of foldable lashing rings evenly distributed, approx. 8 t pulling force * 8 pairs of foldable lashing rings evenly distributed, approx. 2.5 t pulling force * 2 pairs of foldable lashing rings at the rear, approx. 2.5 t pulling force * External frame with holes approx. every 500 mm for tie-down straps Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pockets: * 8 per side integrated into the outer frame * 4 rows of stake pockets transverse to the loading area Iedpfx Aewt Iylshustb Floor: * Approx. 28 mm Z-grade hardwood floor recessed into the outer frame Front Wall: * Solid front wall * Depot for 16 plug-in stakes approx. 100/40 * Front wall bolted to the top frame Equipment: * 2 wheel chocks with holders * 2x PVC toolboxes, approx. 600/400/500 mm * Holder for beacon light at rear incl. lamp * 2 LED reversing lights (rear) * 2 aluminum loading ramps, dimensions approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair * Wheel load

Condition: new, maximum load weight: 39,850 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 - Basic version tyre pressure monitoring, connected to EBS CAN-bus system - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Itodpfx Ajwx Dbpehuob Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: new, maximum load weight: 40,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles, both immediately and soon available, on our website. Below is an excerpt from the equipment features. The full equipment specification is available upon request. Itjdpfxsvl N N Hj Ahujb Chassis: * Welded construction made from high-quality steel profiles in lightweight design with through crossmembers * Rear inclined section approx. 630 mm in length and headframe lowered by approx. 100 mm * Excavator arm recess at the rear of the chassis, approx. L 3,750 x W 640 x H 290 mm, between the longitudinal beams with steel floor Wheel recesses: * In the low bed approx. 1,700 mm in front of the first axle a pair of wheel recesses (support/surface under the ramps) approx. H 190 x L 1,550 x W 800 mm, including flat aluminum (climbing aid) * Additionally, between the first and second axle, a pair of wheel recesses approx. H 190 x L 1,080 x W 800 mm, including flat aluminum (climbing aid) * All wheel recesses with aluminum covers and steel checker plate floor Kingpin: * 2-inch kingpin Landing gear: * 2 x 12 t drop legs with aluminium compensating foot Rear support: * Two adjustable drop legs Axles: * 3 x 10 t air-suspended axle units, brand SAF, with drum brakes approx. 300 x 200 mm * Automatic slack adjusters * ABS * Centrally-located wheel fixing for twin tyres * Total air suspension lift approx. 200 mm, of which lifting approx. 140 mm and lowering approx. 60 mm, air suspension controlled up/down via air valve with locking function Lifting axle: * 1st axle liftable, operated from the chassis frame Steering: * 3rd axle forced-steered with manual and automatic reverse lock Brake system: * Dual-line compressed air braking system to EC standards with EBS and RSS * Spring actuators as parking brake acting on two axles * Polarity-protected coupling heads mounted firmly on the front crossmember, EC version, without connecting lines to the tractor unit Tyres: * 12 x 235/75 R17.5 – brand of our choice, mounted on 6.75x17.5 rims with offset Mudguards: * As per EC, 1/4 PVC mudguard Floor: * Wooden floor set flush into the outer frame. Above the wheels with steel checker plate cover Load securing high bed: * 4 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t * Holes for lashing straps every approx. 500 mm in the outer frame Load securing low bed: * 8 pairs of folding lashing rings in the outer frame, evenly distributed, lashing capacity approx. 8 t * 4 pairs of folding lashing rings sunken into the chassis frame longitudinal beams, lashing capacity approx. 8 t * Holes for lashing straps every approx. 500 mm in the outer frame Stake pockets high bed: * 4 pairs of stake pockets in the outer frame, evenly distributed Stake pockets low bed: * 6 pairs of stake pockets in the outer frame, evenly distributed Removable stakes: * 20 removable stakes made from galvanized tube approx. 80/50 mm, total length approx. 1,000 mm Front wall: * Bolted, fixed steel corner posts filled with approx. 25 mm aluminum hollow sections Plug-in sideboards high bed: * One plug-in board each side in front, made of approx. 400 x 25 mm aluminum hollow section, length approx. 2,400 mm, removable, insertion pocket front in front wall corner post, rear in extra stakes approx. 80/50 mm * Additionally, one plug-in sideboard approx. 400 x 25 mm between the rear extra stakes as rear load securing Ramps: * 2 spring-assisted aluminum ramps, loadable up to approx. 32 t when supported * Ramps secured with

Condition: used, functionality: fully functional, In this offer you are purchasing a mint condition resting ECG "GE CAM Connect 14" Object of sale: 1 x GE CAM Connect 14 with the following features: Mobile resting ECG 12 or 15 leads Easy to integrate into MUSE and PACS systems Itedpfowr Anbox Ahusb With automatic arrhythmia detection DICOM-compatible Condition: This is a used device which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, empty load weight: 13,220 kg, maximum load weight: 51,780 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 06/2011, loading space length: 19,210 mm, loading space width: 2,550 mm, loading space height: 1 mm, suspension: air, tire size: 235/75R17,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, air suspension, 5-axle, 1st and 2nd axle liftable, trailing steering, last axle trailing steering, raising + lowering, 4th and 5th axle steered, ABS (anti-lock braking system), extendable, stepwise extendable, widenable to 3m, lashing eyes, twin tires, rotating beacon 5x 13t Gigant axles! Semi-trailer telescopic from 8810mm to 15110mm from the gooseneck, 1st and 2nd axles liftable, 1st axle steered, 2nd and 3rd axles fixed, 4th and 5th axles trailing steered, load height 900mm! Widenable to 3000mm! Iodjwa R Thepfx Ahujtb only about 150000km driven ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: like new (used), functionality: fully functional, machine/vehicle number: A06B-0854-B190, Servo motor Brand: GE Fanuc Model: 6 Motor specification: A06B-0854-B190 Features: Isdjr Nbkpopfx Ahuetb Power: 7.5 kW Frequency: 50/60 Hz Current: 44 A Potential energy: 135-222V-AC Revolutions: 1500-8000 RPM

Condition: like new (used), functionality: fully functional, machine/vehicle number: L9-3000, input frequency: 200 Hz, GE FANUC L9-3000 A06B-0564-B177 Servo Motor GE FANUC L9-3000 A06B-0564-B177 Brand: Fanuc Iedpfericrwox Ahuotb Model: L9/3000 Motor Model. A06B-0564-B177 Features: Power: 2.0 kW Frequency: 200 Hz Current: 12 AMP Potential energy: 114 V From machine: Amada cnc punching machine model Vipros 255

Condition: excellent (used), Buderus GE515 low temperature boiler 350kw. on request with Weishaupt oil or gas burner. Itjdpjnr Ek Rofx Ahueb

Condition: excellent (used), Buderus low-temperature boiler GE515-400kw Itedpov A I Hlefx Ahujb

Condition: excellent (used), Heating boiler Buderus GE315-140kw. Oil or gas Weishaupt Ijdpfomnqcqjx Ahuotb

Condition: excellent (used), Buderus GE315/200kw low-temperature boiler with oil burner Iodjwauarjpfx Ahuetb

Condition: excellent (used), Year of construction: 2008, Boiler Buderus GE315 Output:170kw Burner: oil or gas Weishaupt burner available on request Iedpfemnqcmox Ahuetb Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Buderus GE615 /820Kw boiler with Weishaupt burner Itedpsq Am Ivofx Ahusb

Condition: excellent (used), Buderus GE315 heating boiler 230kW (0295), available with oil or gas burner on request Itsdoxqry Iepfx Ahujb

Condition: excellent (used), Year of construction: 2011, Buderus GE515 low-temperature 455 kW Itsdow Ey Dajpfx Ahujb