Used Tec Rotec for sale (87)

Condition: used, axle configuration: 3 axles, first registration: 01/2008, color: other, Year of construction: 2008, Empty weight: 5.160 kg Fsdpfx Agsxvxvaemepb Axle 1: left 5 m right 5 mm Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: used, maximum load weight: 34,079 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 07/2013, next inspection (TÜV): 09/2026, loading space length: 10,750 mm, loading space width: 2,470 mm, loading space volume: 30 m³, total width: 2,470 mm, total height: 3,500 mm, Equipment: ABS, According to our "General Terms and Conditions" and without any guarantee or warranty, we can offer you the following vehicle today, subject to prior sale, errors, and typographical mistakes: Vlastuin/Detec Slurry Trailer ( Vehicle 49 ) First registered: 22.07.2013 Manufacturer: Vlastuin Rolling/Equipment/DETEC Permissible total weight: 41,000 kg Unladen weight: 6,921 kg Payload: 34,079 kg Volume: 30,000 liters TÜV (inspection): 09/2026, Safety Inspection: 03/2026 Total length: 10,750 mm Total width: 2,470 mm Total height: 3,500 mm Support legs 1st axle: lift axle Tyres: 385/65R22.5 (1st axle approx. 50/50%, 2nd + 3rd axles approx. 40%) 3rd axle: trailing steering axle VALX axles 1 compartment, 1 baffle wall 1 x inlet, 1 x outlet Level indicator/sight glass on driver’s side, front third 2 x wheel chocks 1 pair LED work lights at the front underrun protection, 1 pair at the hose holders, 2 x top rear, 2 x reverse lights Fsdpfxex Tbxus Agmepb Börger pump FL 1036 (manufactured in 2013) Hose trays left and right along the trailer Cargo pressure gauge Price: €32,500 (net) All information provided without guarantee or warranty. Our General Terms and Conditions apply. Jurisdiction for both parties up to a disputed value of €50,000 is the District Court of Ludwigslust; for higher values, the Regional Court of Schwerin. Subject to prior sale, errors, and typographical mistakes.

Condition: new, maximum load weight: 32,965 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, Year of construction: 2025, Equipment: ABS, Stock no. 5609 New vehicle in stock – immediately available! Purchase, lease, or rent with an option to buy (subject to agreement). 30 m³ D-Tec V2A Slurry Tanker Semi-Trailer / Rear-Steer Axle / Lift Axle / NEW VEHICLE ---- * Manufacturer: D-Tec * Model: SV 2006 * NEW VEHICLE * Gross weight: 39,000 kg * Unladen weight (manufacturer specification): 6,035 kg * Payload: 32,965 kg * Axles: 3 x Valx axles / 1st axle liftable / 3rd axle rear-steer / disc brakes / traction aid * Suspension: air suspension with raising and lowering function * Tyres: 385/65 R22.5 on steel rims * Colour: Chassis RAL 9005 black, tank body RAL 7015 grey * Capacity: 30 m³ / Ø 2.20 m / 1 compartment * EBS Wabco * Vogelsang rotary lobe pump * Max. delivery rate: 6,000 L/min * Rear swing-out discharge * 8" docking funnel on top, lockable with manual slide valve * Filling and venting with pneumatically operated shut-off valve incl. securing of all pneumatic valves * 1" ball valve on right at the pump * 4" flush pipe with 2 gravity outlets of 2.5" each (1 at the front and 1 in the middle of the tank) * Automatic pump shut-off * Pneumatic control box at the rear left * 1 foldable domed cover * 5 m hose trays left and right (galvanised steel) * Fill level indicator at front left * Operating temperature: 0–60 degrees Celsius * Side access ladder on the left * Unladen support legs * Single mudguards * Coupling height: 1,180 mm * 24 V lighting system * 2x LED work lights at rear * 2x LED work lights left and right German semi-trailer! German documents! NEW VEHICLE! New vehicle in stock – immediately available! Purchase, lease, or rent with an option to buy (subject to agreement). Notice regarding potential errors in the listing: Despite careful preparation, errors or inaccuracies may occasionally occur in the text or specifications. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or for further questions. Fpsdpfxox Suxlo Agmeb

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, Used HSC machine RXP400DS/ RXD5 -overhauled- The machine is completely overhauled, tested and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min in all linear axes. - Network connection: - Tool measuring laser: Diameter and contour measurement, wear monitoring Fpodpfslzhhcex Agmsb and breakage control of the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction -RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - Tool changer 12-way row, optional tool changer conversion to chain - High-precision option - Remote maintenance via Teamviewer - Transport dimensions of machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: Approx. 3,000 kg A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0656-000, space requirement length: 7,000 mm, space requirement width: 5,000 mm, space requirement height: 5,000 mm, overall weight: 8,000 kg, total height: 5,000 mm, total width: 5,000 mm, total length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet length: 1,200 mm, control cabinet width: 400 mm, type of input current: three-phase, input voltage: 380 V, power: 30 kW (40.79 HP), 6 stainless steel silos, of which 3 silos are equipped with internal mixers. Capacity per silo approx. 6 m³. Additionally, there is a big bag filling station with dust extraction included. Control cabinet including weighing hopper for batch preparation. Fpedox R Sr Hepfx Agmob

Condition: used, Year of construction: 2020, Manufacturer : Hagmann Tec AG Model: MEDIMAT 711-45 Year : 2020 Fpedpfx Agox R Dfrsmob Type : Heat sealer / Sealing machine Maximum power : 8 kW Pressure : 6,0 - 8,0 bar Format : interchangeable sealing plate Sealing surface 550x350mm Sealing temperature up to 250°C Sealing force 10-70 kN Sealing time up to 9.9 seconds Documentation available

Condition: used, axle configuration: 3 axles, first registration: 08/2006, color: other, Year of construction: 2006, Empty weight: 5.600 kg Fpjdpfx Asw Rn Hfsgmob Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: excellent (used), roller chain, drive chain -per package: Length: 5 m -Size reinforced: 16B-1 1-way 1" x 17.02 Fedpfx Agob A Niqjmepb -Quantity: 23 x pieces packages available -Price: per package -Package weight: 14 kg/piece

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Fodpfjud R T Ssx Agmjpb

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Control: Röders RMS6 in current version Fpodpfx Agovvlmcsmeb A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: good (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 11353-24, travel distance X-axis: 500 mm, travel distance Y-axis: 455 mm, travel distance Z-axis: 240 mm, table width: 550 mm, table length: 450 mm, overall weight: 5,500 kg, spindle speed (max.): 42,000 rpm, Roders TEC RXP 500 – Precision 3-Axis CNC Milling Center Year of manufacture: 2005 We offer a used 3-axis CNC machining center Roders TEC RXP 500, renowned for its exceptional precision, high dynamics, and surface quality. Ideal for tool and mold making, micromachining, aluminum, and plastics processing applications. Fpodpfewww S Sex Agmob

Condition: good (used), Year of construction: 1997, Portal center with high rigidity thanks to a cast construction and the latest technology in the area of control, vibration damping, dynamic axis movements and temperature stabilization of the machine frame. Even grinding is possible with high precision. Fpedsvt Dwbepfx Agmjb Year of manufacture 1997 Renewed components: Milling spindle - entire control unit - guides Technical data - Travel ranges X 1,000 mm, Y 800 mm, Z 600 mm - Drive power 25 kW - Speed 30,000 rpm - Spindle mount HSK E 50 - Feed rate up to 30 m/min. Work table - Dimensions 1,200 mm x 1,000 mm - Max. workpiece weight 1,000 kg - Table with 3R system for workpiece clamping Control - RMS 6 Windows NT, including software for NC milling simulation in the latest version - Electronic hand control panel - Network card - Integrated workshop programming - Automatic spline interpolation - Windows NT enables direct milling path programming - Adjustable dynamics for high accuracy Machine structure - High machine rigidity due to portal construction in cast construction - Optimal vibration damping of the spindles due to cast-in special plastic - Temperature stabilization of the entire machine body - Crane loading possible Tool changer - 18 stations, dust-proof, with integrated measuring laser for tool length and diameter - Changing in sister tools, Dependent on tool life Equipment - Cooling unit for temperature stabilization - Fully protected cabin, cabin roof can be opened - Touching with 3D probe for quick setup - Integrated chip conveyor for easy disposal of chip waste Machine data - Space requirement (without service areas!) LxWxH approx. 4,200 mm x 3,350 mm x 4,200 mm - Weight approx. 13,000 kg - Connected load 50 kVA, 400V, 50/60 Hz The machining center is in very good condition and works reliably. There is no backlog of maintenance or repairs. A viewing under power and chip is possible by appointment. All tools and operating materials shown in the photos are not included in the scope of delivery of the machine. Technical changes and errors reserved.

Condition: used, axle configuration: 3 axles, first registration: 11/2004, color: other, Year of construction: 2004, Empty weight: 5.300 kg Axle 1: left 8 m right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm Fpjdpfx Ajxy R Rdogmob We have the possibility to stack trailers!

Condition: good (used), Control module, compact control unit, fan coil control, electronic module -Manufacturer: Meitav-tec, Universal Fan Coil Control -Type: MIGA1-FC-SUPER Fsdpfx Aeiiigpjgmopb -Operating voltage: 230 volts -Cardboard dimensions: 170/90/H45 mm -Weight: 0.5 kg

Condition: excellent (used), Possibility of simultaneous welding and plasma cutting. Output power: at 60% 400A/36V, at 100% 310A/32V. Fodpfx Aeud Rl Uegmepb

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 50,000 rpm, overall weight: 3,800 kg, workpiece weight (max.): 200 kg, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 2,000 mm, Equipment: documentation/manual, Röders RXP300 -overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: X-axis: 320 mm Y-axis: 300 mm Z-axis: 200 mm (height) The clearance height is 390 mm above the machine table without chuck. Machine table: Size: 370 mm x 350 mm Workpiece mass: Maximum 200 kg Axis drives: Highly dynamic linear motors in all axes with integrated cooling. Feed rates: 0 - 40,000 mm/min in all axes. Spindle: HSK25E 50,000 rpm Tool changer: Fjdpfx Aevvigmjgmspb 42-way Automatic 3D probe Control: Röders RMS6 in current version (2024) A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel.

Condition: used, maximum load weight: 30,460 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2018, next inspection (TÜV): 06/2026, loading space volume: 30 m³, Equipment: ABS, Stock number: 5729 D-Tec 30,000 L Stainless Steel Slurry Tanker Trailer with Vogelsang Pump / Rear-Steer Axle / 2 units in stock ---- * Manufacturer: D-Tec * Model: Slurry Tanker Trailer * First registration: 03/2018 * Gross vehicle weight: 36,000 kg * Unladen weight (as per registration): 5,540 kg * Payload: 30,460 kg * Volume: 30,000 litres, single compartment * Colour: Silver * Axles: 3 x BPW; 1st axle liftable, 3rd axle rear-steering, disc brakes * Tyres: 385/65 R 22.5, approx. 40% tread remaining * Suspension: Air suspension with lifting and lowering function * EBS * 6,000-litre Vogelsang pump, type VX 186-260 Q * 6" swivel arm, rear right * 6" flushing line * Fill level indicator, front left * 8" suction funnel, top rear * 8" suction line * 8" direct discharge (free fall) * Open hose trays, left and right * Access ladder, front left * Manhole cover, front * Pneumatic control box, rear left * Inspection windows, rear top and bottom * LED work lights * Landing leg * Individual mudguards German trailer! German documents! 2 units available in stock! Fsdpfx Ajx Nulaogmspb Note regarding possible errors in this listing: Although this advert has been prepared with care, errors in text or details may occasionally occur. We accept no liability for mistakes, alterations, or prior sale. All information is provided without guarantee. Please contact us to verify details or if you have further questions.

Condition: used, axle configuration: 3 axles, first registration: 04/2010, total width: 2,470 mm, Year of construction: 2010, Equipment: ABS, Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Unladen weight: 5,250 kg Fedpfx Asx Nhydogmspb Payload: 37,750 kg Gross vehicle weight: 43,000 kg Extendable body: Yes APK (Technical Inspection): valid until 07/2026 Please contact Bastien Begemann or Corné Visser for further information.

Condition: used, axle configuration: 3 axles, first registration: 05/2004, color: other, Year of construction: 2004, Empty weight: 5.300 kg Axle 1: left 6 mm right 6 mm Axle 2: left 8 mm right 8 mm Fjdpfxexy R I Ao Agmspb Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!

Condition: excellent (used), Year of construction: 2019, Pack-Tec palletizing system, year of manufacture 2019 Fpedpfx Agjx N I S Hemeb For 6, 12, or 20 VDF crates, compact footprint Machine will be available in December 2026

Condition: excellent (used), For sale: High-quality milling head by renowned brand Walter – Xtra-tec® series, designed for precision roughing and semi-finishing of metals. Premium industrial tool, ideal for CNC machining centers and conventional milling machines. • Cutting diameter: Ø65 mm • Model: F4033.B27.080.Z07.06 • Mount: SK40 / ISO40 • System: Xtra-tec® • Number of insert seats: 7 • Superior build quality – Walter German precision • Applications: face milling, machining of steel, cast iron, and alloys • Condition: used, in excellent technical condition, ready for operation The head offers outstanding performance and long service life – perfect for industrial, workshop, and production uses. Fpjdpfxoxlgnis Agmjb

Condition: used, Year of construction: 2001, functionality: fully functional, overall weight: 5,900 kg, space requirement height: 3,000 mm, space requirement width: 2,250 mm, space requirement length: 2,600 mm, workpiece weight (max.): 800 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, Equipment: documentation/manual, Röders RFM600/2 - used Working area: X-axis: 600 mm Y-axis: 450 mm Z-axis: 300 mm (height) Machine table: T-slot design Size: 700 mm x 550 mm Workpiece weight: Maximum 800 kg Feed rates: 0 - 30,000 mm/min on all axes. Control system: Röders RMS6 Spindle: HSK-E40, 42,000 rpm incl. HG sensor (high-precision sensor for detecting and compensating spindle thermal elongation) Cooling: Minimum quantity lubrication, air Tool changer: 17-position linear changer Fpjdpfxoxl Sfaj Agmjb Accessories: Laser for tool measurement & compensation Automatic 3D probe Tool cleaning Workpiece cleaning Web camera

Condition: used, functionality: fully functional, WLD-TEC Gasprofi 1 Gas Burner with bottle and pedal. 2 for sale. 1 piece/200 EUR. Fpsdpfx Agsubc Hfomob Good working condition. Please check out our other listings as well.

Condition: new, Briwa-tec Rubin 1200 side channel blower (176 kg) with air filter , pressure-/vacuum relief valve , additional silencer and various connection pipes (26,5 kg) ,unused, 100% functional, scope of delivery according to photos Fodpsi D Uk Aofx Agmjpb

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, used HSC machine RXP800DS - overhauled - Workspace: - X axis: 200 mm - Y-axis: 294 mm - Z axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feeds 0 - 40,000 mm / min in all linear axes. - Network connection: - Tool measurement laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1 chuck - Emusion cooling with Oil-mist-suction - RMS Main Job manager - Spindle max. 60,000 rpm HSK 25 - Tool changer: 24 chain changer, able to operate while machining - High precision option - Remote maintenance via Teamviewer Fedpslzhhkefx Agmspb - Transport dimensions machine: W 2,425 x L 1,925 x H 2,700 mm - Weight: approx.3,000 kg The machine is completely checked, measured and overhauled in-house. Please arrange a viewing appointment with us.