Used Mitsubishi Electric Motor for sale (363)

Condition: as good as new (ex-display), Brand new never used. Please check out our other listings as well. Prsdpfsu Ur Rajx Anyjb

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Pedpfjzuvyaex Anyerb Year of manufacture: 2014, available from the end of August.

Condition: used, Year of construction: 2015, Travel range: X 600 mm Y 400 mm Z 400 mm Including coolant system Water bath machine Predpfoz D Egrex Anyjb

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, overall weight: 14 kg, load capacity: 3 kg, arm reach: 400 mm, Number of Axes / Scara (Horizontal Type) / 4 Axes Maximum Load Capacity / 3 kg Z-axis Stroke / 180 mm Prodpfx Ajza D Htjnysb Accuracy / ±0.01 mm in the X-Y and Z axes, ±0.01° in the rotation axis Maximum Speed / 7200 mm/s Weight / 14 kg Environmental Protection Class / IP20 Mounting Type / Floor-mounted

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: J20M0260A, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.3 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 350 mm Travel range Z-axis: 300 mm Travel range U/V: ±60 mm Workpiece size: max. 1,050 × 800 × 295 mm Workpiece weight: max. 1,500 kg Available wire diameters: 0.10–0.30 mm MACHINE DETAILS Predezu N Abepfx Anyob Dimensions & Weight Machine dimensions (L x W x H): 2,200 × 2,500 × 2,150 mm Machine weight: 3,700 kg EQUIPMENT Automatic wire threading

Condition: good (used), Three-phase motor, electric motor Pedpfx Aed Tgapenysrb -Mitsubishi: Super Line type SF-J -Power: 2.2 kW -Voltage: see nameplate -Speed: 1430/1720 rpm -Shaft: Ø 28 x 55 mm -Design: B3 -Dimensions: 360/270/H205 mm -Weight: 30 kg

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, overall weight: 3,500 kg, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Pedsx D Iv Sepfx Anyorb Additional equipment • Wire diameter: 0.1 – 0.3 mm Machine Benefits Technical Machine Benefits • Table dimensions: 840 x 640 mm • Max. Taper angle: 15/260 • Power supply: 3pe 50/60 hz ac200/220v (35 a) • Air source: 0. 5 mpa (75 l/min) • Pc technology with 15" lcd color screen, touch screen, and mouse • Electronic manual control panel • Machining support with 2d/3d cam and graphics verification Extra Information Machine still under power

Condition: used, power capacity 26 kW volt 200 V ampere 139 A Prsdpfx Ansy S D Ivoyob revolutions per minute 1150/3450/6000 U/min For sale is a functional MITSUBISHI SJ-26BZ spindle motor AC spindle motor 15kW for Mazak machines WEIGHT: approx. 230kg

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 400 mm, wire diameter (max.): 0.3 mm, overall weight: 2,700 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details. Predpfxez E Su Ej Anyjb - Machine Type: Wire Electrical Discharge Machine- Series: MP Series (Water Technology)- Type: TYPE II- Controller: D-CUBES- Power Supply: 3PE 50Hz AC200V, 35A, SCCR 2.5kA- Air Source: 0.5 MPa, 75 L/min- Operating Hours:- Machining Time: 3711- Start Time 1: 26- Start Time 2: 4137- Off Time: 426

Condition: ready for operation (used), Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot SN: FK612018R, used, in good condition, fully functional, supplied as shown in the photos. ATTENTION: Please enquire separately for packing and shipping costs! The following components are also available in our shop: Controller "Mitsubishi Electric MECHA CR750-07VLD1-1-S15" / Connection cable "Mitsubishi Electric BKO-FA0741H07-D" / Connection cable "Mitsubishi Electric BKO-FA0739H07-D" Pedpfex Dw Nuox Anyjrb

Condition: ready for operation (used), Mitsubishi Electric RV-7FM-D1-S15 industrial robot SN: FG606002R – minor damage at the air connection, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire about costs for packaging and shipping separately! The following components are also available in our shop: Controller "Mitsubishi CR750-07VD1-1-S15" / Connection cable "BKO-FA0741H05-D" / Connection cable "BKO-FA0739H05-D". Prsdpfxox Dw Nzj Anysb

Condition: ready for operation (used), Mitsubishi Electric MECHA CR750-07VLD1-1-S15 robot controller SN: F1A803065M, used, in good condition, fully functional, scope of delivery as per photos. The following components are also available in our shop: connection cable "Mitsubishi Electric BKO-FA0741H07-D" / robot "Mitsubishi Electric MELFA RV-13FM-D1-S15 industrial robot" / connection cable "Mitsubishi Electric BKO-FA0739H07-D". Predpfxox Dw Nne Anyeb

Condition: used, power capacity / kW volt / V ampere / A MITSUBISHI ELECTRIC CORPORATION AC SERVO MOTOR HA200C SERIAL: 0Y475 Pedpjyn Sbujfx Anysrb

Condition: ready for operation (used), Mitsubishi Electric CR750-07VD1-1-S15 robot controller SN: F1A606002M, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. The following components are also available in our shop: Connection cable "Mitsubishi Electric BKO-FA0739H05-D" / Robot "Mitsubishi Electric RV-7FM-D1-S15 industrial robot" / Connection cable "BKO-FA0741H05-D". Prodpfx Ansx Dw Nboyob

Condition: used, power capacity // kW volt / V ampere / A total power requirement / kW weight of the machine ca. / t required space / m MITSUBISHI ELECTRIC CORP. AC SERVO MOTOR HA300C SERIAL: 0Z137 + Pjdpsymgapefx Anyjrb TAMAGAWA FA-CODER TYPE: OSE 5KN-6-12-108

Condition: good (used), Year of construction: 2006, operating hours: 2,322 h, load capacity: 1,600 kg, lifting height: 3,295 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, empty load weight: 3,000 kg, mileage: 2,322 km, Electric duplex forkliftBrand: MitsubishiYear of manufacture: 2006Capacity: 1,600 kgLift height: 3,295 mmOverall height: 2,100 mmCONTAINER forkliftHours: 2,332 hoursEquipped with FREELIFTEquipped with SIDESHIFTBattery from 2006With external chargerAutomatic filling systemWatch the video on YouTube Podpeyyphkefx Anyerb

Condition: used, Year of construction: 2008, operating hours: 9,240 h, Type of fuel: LPG Colour: Grey Empty weight: 4.300 kg Dimensions (LxBxH): 268 x 129 x 259 cm Lifting capacity: 3.000 kg Lift height: 605 cm Clearance lift height: 213 cm Fork dimensions: 1.500 x 970 mm - Year: 2008 Pjdsyttqhspfx Anysrb - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: DF13F-13190 - Operating hours: 9240 - Lifting capacity: 3000kg - Lifting height: 6050mm - Overhead clearance: 2580mm - Free lift: 2130mm - Fork length: 1500mm - Maximum fork width: 970mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Half cabin, Work lights - Mast: Triplex - Inspection valid until: 06-2025 - Drive: LPG - Motor brand: Mitsubishi - Transport dimensions: 2680mm x 1290mm x 2590mm (l x w x h) - Transport weight [kg]: 4300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Mitsubishi Electric CR750-20HD1-1-S15 industrial robot, SN: F1A508143M, single phase AC200-230V 50/60 Hz, used, in good condition, 100% fully functional, scope of delivery as shown in photos. Pjdpsx Dw Nhsfx Anyorb

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, !! Parts in mint condition with warranty!! Price between €300-1000 each. Over 40 motors and controllers available. Predpoucwzasfx Anyob A list of the items is available upon request. We would be happy to advise you!

Condition: used, power: 110 kW (149.56 HP), first registration: 02/2015, fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2015, LICENSE PLATE: EY907JS TITLE: NEW MITSUBISHI FUSO 7C15 ROLL-OFF TRUCK, FRONT AND REAR LEAF SPRING SUSPENSION, RIGHT-HAND DRIVE, REQUIRES A CLASS C LICENSE REF: 24C40 YEAR: 02/2015 HORSEPOWER: 150 ENGINE DISPLACEMENT: 2998 EURO STANDARD: 6 KILOMETERS: 0 with new original engine TRANSMISSION: automatic DIFFERENTIAL LOCK: no RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2800 TOWING CAPABILITY: yes ORIGIN: Italy CABIN: short and low NUMBER OF SEATS: 3 PAYLOAD: 4250 kg - TRACTOR UNIT: 7500 kg at full load - TRACTOR UNIT + TRAILER: 11000 kg at full load BODY TYPE: new roll-off ROLL-OFF MODEL: TAM TE6-32 SLIDING: yes CRANE: no ROLLER: vertical ADR: no DIMENSIONS FOR BODY INSTALLATION: FROM: 2.70 m + 0.16 m TO: 3.50 m + 0.16 m OVERALL LENGTH: 5.30 m OVERALL LENGTH WITH CONTAINER: 5.60 m Podpfxezqppyo Anyorb FRONT CABIN WIDTH: 1.95 m REAR WIDTH BEHIND AXLE: 2.00 m REFURBISHED: yes SERVICED: yes TIRES: 80% front - 50% rear PRICE: 46,500.00 + VAT. Errors and omissions excepted. The prices listed do not include VAT. Please contact the sales representative for an updated price and terms comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA ROLL-OFF TRUCKS operates in the sale and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Specializing in trucks, trailers, and roll-off equipment. With a readily available fleet of over 50 trucks and over 150 roll-off containers, with and without cranes. S.E.&O. Due to the amount of information and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: used, Year of construction: 1998, overall weight: 80 kg, Equipment: type plate available, Spindle motor SJ - 11AW - 4M Mitsubishi Year of manufacture: 1998 Weight: 80 kg Nameplate present AC spindle motor, made in Japan, Mitsubishi Electric 4-pole, 3-phase, AMP input 200-230V, 50/60Hz, IP 44 Prjdpfxjzq Atls Anysb Frame B112FU IEC 34-1 1994, Manual No. BNP-B3759 Ambient temperature 0-40°C The motor was installed on a Mazak machine. Price: negotiable Our asking price is €1,950.00 net, ex works, plus packaging costs. Subject to technical changes and errors. Sale exclusively to countries within the EU.

Condition: used, mileage: 171,770 km, power: 92 kW (125.09 HP), first registration: 06/2004, fuel type: diesel, axle configuration: 2 axles, color: black, gearing type: mechanical, emission class: euro3, Year of construction: 2004, TARGA: GS717AP TITLE: MITSUBISHI CANTER 3.0 HOOK LIFT, LEAF SPRUNG FRONT AND REAR REF: 24C32 YEAR: 06/2004 HORSEPOWER: 125 DISPLACEMENT: 2977 cc EMISSIONS CLASS: Euro 3 KILOMETRES: 171,770 GEARBOX: manual DIFFERENTIAL LOCK: no RETARDER/INTARDER: no AXLES: 2 WHEELBASE: 2500 mm TOWING CAPACITY: yes ORIGIN: imported CAB: short, low SEATS: 3 PAYLOAD: 1,300 kg - GVW (Tractor): 3,500 kg fully loaded - GVW (Tractor + Trailer): 7,000 kg fully loaded BODY TYPE: hook lift HOOK LIFT MODEL: PRISMAG 3 TON TELESCOPIC (extendable): no SWIVEL: no ROLLER: no ADR: no ACCESSORIES: - Hook height: 90/92 cm - Channel width: 88 cm - Body ref. 24-U-30 BODYWORK CAPACITY MAX: 3.15 m + 0.14 m OVERALL LENGTH: 4.60 m OVERALL LENGTH WITH CONTAINER: 5.00 m REFURBISHED: yes INSPECTED: 10/04/2024 TYRES: 100% NEW PRICE: €24,500.00 + VAT – including body 24-U-30 Displayed prices do not include VAT. Please contact our sales team for an up-to-date quote and terms. For more information: Loris: 3484773001‬ URL: Pjdpfx Anjuznrvoyjrb #hookliftspecialists AURORA HOOK LIFTS operates in the purchase and sale of industrial and commercial vehicles, specializing mainly in the waste management sector. Experts in trucks, trailers, and hook lift equipment. With a stock of over 50 trucks and more than 150 bodies and containers, available for immediate delivery, with and without hook lift cranes. E.&O.E. (Errors and omissions excepted) Due to the high volume of listings and details provided, Aurora advises verifying the accuracy of the data with our sales team.

Condition: used, functionality: fully functional, Year of construction: 2021, laser hours: 10,941 h, laser power: 6,000 W, total length: 11,115 mm, total width: 3,465 mm, total height: 2,840 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, fume extraction, nozzle changer, Laser cutting system with Mitsubishi Electric 6kW fiber laser source Year of manufacture: 2021. Operating hours of the laser as of 08/2026: 10,941 Table size, X-axis (mm): 3,100 - Y-axis (mm): 1,565 including standard accessories and the following options: - Cooling unit Haosch MCWL-120DTR. 12 kW cooling capacity - Automatic pallet changer - Sideros CaCo3 (calcium carbonate) dispenser for aluminum cutting - Automatic nozzle changer with 21 positions - Drawer for small parts and dross - Automation interface set - Extraction system - Processing head "Zoom-Head" for stepless, automatic adjustment of beam shape and diameter. High-tech for permanent maximum laser power, cutting quality and process stability! - Mitsubishi Electric fiber laser source, integrated into the machine frame - CNC control "D-CUBES" with 19" multi-touchscreen display - Safety light barriers for safe operation of the pallet changer - Rapid traverse speed 170 m/min (simultaneous) - High Peak Piercing for fast piercing of thick structural steel - F-CUT for maximum performance in thin sheet metal - Optimal access via sliding door with an opening of 1,830 mm and additional pivoting door with an opening of 800 mm - Signal light with 5 lights to indicate the remaining time until the end of the process - Narrow gap cutting: Leads to a drastic reduction in nitrogen cutting gas consumption of up to 30%. - ECO mode: Saves up to 70% of energy costs in standby mode through automatic, step-by-step switching to standby mode. - All important CNC/PLC components from Mitsubishi Electric: For maximum reliability and process stability. Significant reduction in maintenance costs. - MEL'S AR Augmented Reality Technology: Automatic generation of a virtual top view of the remaining sheet metal in the machine. Placement and cutting of parts via drag and drop. Workpiece dimensions (mm): 3050×1525×t25 Pallet weight (kg): 950 Working height cutting table (mm): 890 X-axis (mm): 3,100 Y-axis (mm): 1,565 Z-axis (mm): 120 Accuracy: X-axis (mm): 0.05/500 Z-axis (mm): 0.1/100 Repeatability XY-axis: ±0.01 Dimensions (width × depth × height mm): 11,115×3,465×2,840 Weight (kg): Machining system approx. 7,000 kg Pallet changer approx. 2,400 kg Dismantling and loading are to be carried out by the buyer. We can establish contact with the manufacturer ASTES4 – Group Company of Mitsubishi Electric. Sale without warranty or return, ex location. An inspection during ongoing operation is possible by arrangement. Prsdpfxjzqu Dcs Anyjb

Condition: used, mileage: 323,000 km, first registration: 07/2015, Year of construction: 2015, Fuso 7C18 refrigerated truck with Carrier Supra 750 refrigeration unit, Lamberet box body, and LBW • EURO 6 emission standard • Cruise control • Leaf/leaf suspension • Automatic transmission • ABS • ASR / switchable • Airbag • Air conditioning • Central locking • Double passenger seat (3-seater) • Electric windows • Fog lights • Headlight beam adjustment • Reversing camera • Tire size: 205/75 R17.5 • 7,490 kg GVWR. • Unladen weight: 5,200 kg • Payload: 2,300 kg! LAMBERET refrigerated box body: • 12 pallet spaces • Soft wall, 3-part; longitudinally adjustable • Cold curtain • Portal doors at the rear • Side door on the right • Aluminum impact strips on the right and left at the bottom • Lashing rails, double, on the right and left • Floor: Aluminum tread plate • Box body interior dimensions: 5,200 x 2,470 x 2,450 mm • Dhollandia DLHM 10 tail lift, vertical CARRIER Supra 750 refrigeration unit: • Diesel / Electric (380 V) • Remote control in the cab • Temperature recorder • !! Engine has been completely overhauled in our master workshop, 0 km! • !! New clutch! - German vehicle Pedpfjwmn Suex Anyorb - 1st owner! - TÜV / MOT inspection on request and for an additional charge: new! Errors and prior sale excepted!

Condition: used, Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller / Spindle Drive For sale is a used Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller, removed from a MAZAK MULTIPLEX CNC turning center. The unit shows normal signs of use and handling consistent with its age and industrial application (see original photos). The Mitsubishi FREQROL FR-SF series is designed for precise spindle motor control in CNC machine tools, offering reliable performance in demanding industrial environments. Technical Specifications Manufacturer: Mitsubishi Electric Series: FREQROL Model: FR-SF-2-26K-TCE Type: AC Spindle Controller / Spindle Drive Power Rating: 26 kW Voltage Class: 200 V Application: CNC machine tools, turning centers, machining centers, spindle motor control Origin Removed from: MAZAK MULTIPLEX CNC Turning Center Podpfezn Akfsx Anyorb Professionally dismantled Condition Used Normal cosmetic wear from industrial use Please refer to the photos for the exact condition Sold exactly as shown Functionality: Untested (or Fully functional when removed from service, if applicable) Scope of Supply 1 × Mitsubishi FREQROL FR-SF-2-26K-TCE AC Spindle Controller Only the items shown in the photos are included Note This is a used industrial component and may show signs of wear due to previous use. The photographs are an integral part of the item description. Please verify the model and part number before purchasing to ensure compatibility with your machine.