Used Parker Pump for sale (100)

Year of construction: 2014, condition: repair required (used), functionality: limited functionality, • Production freeze dryer, Parker Freeze Dry 5-945-135, custom model, made to order for client’s specification; CE-marked, 400V 50Hz three-phase power. Nominal condensercapacity 453kg of ice. Ksdpfxez Dz Rto Ag Asdu • Dual phase vacuum pump cluster, Busch, RA0255 main pump (max. 25A 400V) + WV1500 booster pump (max. 20A 400V), serviced 2023, overhauled 2021. • Heat control system, programmable, West ProVU + 4 x 6100+ • Five product carts, 27 heated shelves and approx.100kg capacity each (max. 50A 400V). • 2 Full tray sets (2x135 pieces), 18x26 inch, aluminum. • Outdoor cooling unit, cooling + hot gas de-icing, compressor rebuilt and overhauled 2022/2025. Max power consumption 50A 400V. cooling face measurements 4.6mx2.4mx1.3m measurements of the carts 20cmx120cmx70cm

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Used Parker 0745 Hooklift Jaw Crusher Year 1997 CAT Engine (Reconditioned) New Main Hydraulic Pump 700 x 450 Jaw Opening Jaw Liners 80 - 90% Good Kdedpsz Nllgefx Ag Asu Grizzly In Very Good Condition Very Nice Unit. Ready To Go Straight To Work.

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM Kedpfx Agozqgllj Aedu - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: new, Parker T7B B15 2R00 A5M0 vane pump, serial number: 14D07504, unused, 100% functional, scope of delivery as shown in the photos. Kedjzh Sdbopfx Ag Aodu

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Parker Nitromatic PSA Nitrogen Production Plant – 600 Nm³/h – 99.5% Purity Description A complete industrial plant for nitrogen production using PSA (Pressure Swing Adsorption) technology, designed for continuous 24-hour operation and the production of high-purity nitrogen for industrial applications. The system incorporates air compression, drying, filtration, nitrogen generation, and storage, supplying up to 600 Nm³/h of nitrogen at 99.5% purity in a fully automatic manner. Kdsdpfxozm E Rfj Ag Asu Technical characteristics: • PSA (Pressure Swing Adsorption) technology • Manufacturer: Parker Nitromatic • Nominal capacity: 600 Nm³/h • Nitrogen purity: 99.5% • Maximum generation pressure: 7 bar(g) • Continuous 24-hour operation • Fully automatic operation • Integrated alarm system • Continuous oxygen analyzer with permanent purity reading • Ultra-dry nitrogen • 10,000-liter nitrogen storage tank Included equipment: Compressed air • 3 Atlas Copco GA90 VSD FF compressors • Power per compressor: 90 kW • Variable speed drive (VSD) • Integrated refrigeration dryer • 2,000-liter compressed air tank Air treatment • High-capacity filtration system • Parker MXS107 adsorption dryer • Air quality ISO 8573-1 Class 1.4.1 Nitrogen generation • 6 Parker NitroSource N2-80P generators • Total production: 600 Nm³/h • Integrated oxygen analyzer • Automatic PSA regeneration system Storage • 6 intermediate 1,000-liter tanks • 1 final 10,000-liter nitrogen tank

Condition: used, Year of construction: 2016, Parker AKM 60 Kdedoz N S Uzepfx Ag Aeu

Condition: new, feed pressure / bar Kdjdpfx Asy S Dz Njg Asu liter capacity / l total power requirement / kW

Condition: good (used), Parker 82C 061 hose crimping machine for hoses from 1/4" to 1 1/4" (depending on the crimping dies) with 5 sets of crimping dies (colors see images). Included is an Enerpac PUJ1200E hydraulic power unit, as well as a TONE SM 210-SL hose cutter, manufactured in 03/2016. The table is also included. The equipment has been checked for proper functioning and has undergone electrical inspections, which were carried out by an electrical company. Kdedpez N Slmefx Ag Aeu

Condition: new, Parker PGP503B gear pump, 0058CP2D1NE3E2S-503A004, mounting hole spacing: 118 x 118 mm, drive shaft bore diameter: 24 mm, unused, 100% functional, scope of delivery as shown in the photos. Ksdpfx Agsi Ecc Hj Asdu

Condition: used, functionality: fully functional, Year of construction: 2001, fuel type: electric, USED ELECTRIC FORKLIFT ELWELL PARKER (HOIST) LOAD CAPACITY 100 Q WITH FORK POSITIONER. SUPER COMPACT. COMPLETELY OVERHAULED WITH NEW LIFTING ELECTRONIC SYSTEM. Kdjdpfxozyf Aho Ag Asu

Condition: excellent (used), Year of construction: 2009, The new, cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with a clear concept. Key features of the K-MT adsorption dryer series include: • Adsorber profiles manufactured in one piece • Separately controlled main and blow-down valves in a leak-proof design • Compact check valve combination, which guarantees continuous operational reliability while maintaining high availability. All adsorption dryers in the K-MT series feature: • Self-cleaning sieve beds on the wet side • High-quality desiccant During adsorption, the desiccant absorbs the moisture contained in the compressed air. Parker Zander uses only highly active desiccant of the molecular sieve type with high capacity. This desiccant guarantees a long service life, even at high inlet temperatures or low pressure dew points. Regeneration takes place in counterflow to the adsorption process. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerating adsorption dryers refers to: Operating pressure: 7 bar Inlet temperature: 35°C Pressure dew point: -40°C in a cycle with: - 5 minutes adsorption - 4 minutes desorption - 1 minute pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load changes per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load changes per hour and therefore inevitably results in 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs while reducing wear and tear. Multitronic, the control system, with new, groundbreaking functions and a new design, is perfectly tailored to the cold-regenerating adsorption dryers of the K-MT series. It enables the highly effective adaptation of the adsorption dryer, even to extremely diverse operating conditions. From the permanently visually recognizable status to the pressure dew point control of the adsorption dryer, the benefits for the operator are clearly evident with multitronic. The multitronic system, housed in a clear and easily accessible control cabinet, offers: • A comfortable microprocessor control for all Parker Zander heatless dryer systems • Flexible adjustment of cycle times is possible. • LEDs on the front for the individual functions, such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as a synchronous control with the compressor Possible options: • Direct pressure dew point measurement including a digital display • A potential-free output for the pressure dew point limit value • The ability to set the desired dew point in the range of -25°C to -40°C. Technical data: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Kjdoypb Duopfx Ag Ajdu Weight kg: 77 Electrical connection Watt: 50 Year of manufacture: 2009 Manufacturer's price: €8,880

Condition: used, Hydraulic valve, servo valve, proportional valve Hydraulic servo valve, continuously variable valve, PARKER DFplus type D3FPE02YC9NB00 20 Manufacturer: Parker Hannifin GmbH Operating voltage: 24 VDC Operating pressure: max. 350 bar Length = 245 mm Width = 70 mm Kjdpfx Aez Eu E Heg Aodu Height = 155 mm Weight: 6.2 kg Good condition

Condition: excellent (used), Year of construction: 2004, PARKER nitrogen generator Kdjdpfx Agoz E Inno Aeu NG22, serial number 2024-B0400250 Year: 2004 Pressure: 10 bar

Condition: like new (used), Year of construction: 2019, functionality: fully functional, pressure (max.): 16 bar, Adsorption dryer Parker Zander K-MT 35-95/D3 Generation 3 Manufacturer: Parker Hannifin Manufacturing S.r.l. / Parker Zander Model: K-MT 35 Design: K-MT 35-95/D3 Generation 3 Serial number: 399893960001 Year of manufacture: 2019 Voltage: 230 V Frequency: 50–60 Hz Protection class: IP65 Max. operating pressure: 16 bar Min. operating temperature: 1 °C Max. operating temperature: 50 °C Condition: new / unused Kedez Dlafjpfx Ag Ajdu Machine type: Adsorption dryer for compressed air

Condition: like new (used), Year of construction: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar modules and photovoltaic modules Testing of electrical and mechanical safety Support for product development, design, and quality control Early detection of potential problems during the development phase Quality and safety control Endurance testing stand Temperature control Mobile on rollers Pockets for forklift access 400 VAC, 3-phase, 50 AMP IR: 10,000 Amp Year of manufacture: 2012 Weight: 1400 kg Dimensions (H x W x D): 2900 x 1700 x 1900 mm You can find more testing equipment – new and used – in our shop! International shipping costs available upon request! Kedjh Rvh Sopfx Ag Asdu

Condition: excellent (used), Year of construction: 2005, NG7, serial number 3080-0300018 Kdjdpez E Iv Sjfx Ag Aju Year 2005 10 bar

Condition: good (used), Year of construction: 2012, Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyoki, hydraulic control from CNC machining center Santenberg GTC S 2 -Pressure switch: Parker Senso Control SCPSDControl valves: coax 5-VMK 32 NC / 1 824 210 291 -Individual components: see photos -Submission/Price: complete Kedpfx Aektm Dujg Aedu -Dimensions: 340/145/H510 mm -Total weight: 14.7 kg

Condition: used, Year of construction: 1998, voltage 400/50 V/Hz output 13 kw The Parker Polyflex SMM100 is a specialized hose assembly machine designed for Kjdpfx Agszz S Ndo Aedu the precise assembly of ultra-high-pressure thermoplastic hose lines. A safety three-jaw chuck ensures stable fixation and reliable force transmission during the pressing-in of fittings. In our estimation, the machine is in good used condition and can be inspectedunder power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), Year of construction: 2014, PROD. PARKER HIROSS TYPE ATT260 S/N 398616590001 YEAR 2014 POWER (kW) 13.5 CAPACITY (m3/min) 26 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) INVERTER BUILT-IN DRYER EXCHANGER COOLED (AIR/WATER) Kodpfx Agjy Twahs Asdu ON TANK DOCUMENTS YES CONNECTION NEW/USED USED

Condition: good (used), functionality: fully functional, Parker Parkrimp II 83 CE crimping machine for high-pressure hoses (hydraulic hoses) Kdsdpfxsv Rnnle Ag Aeu Crimping force: 125t (at max. 5,000 PSI) Suitable for the following fitting series: 43, 71, 77, 25, 26, 81, HY series (611HT, 801, 836) The following crimping dies are included: 5/16" Purple 80C B05 & A05 3/8" Yellow 80C A06 5/8" Orange 80C B10 & A10 1/4" Red 80C B04 & A04 3/4" Green 80C A12 & B12 & C12 & 12 (78) 1/2" Blue 80C A08 & B08 1" Black 80C A16 & B16 & C16 & 16 (78) 1 1/4" White 80C A20 (2 pcs) & C20 2" Red C24 Weight: 450 kg #8247

Condition: good (used), functionality: fully functional, ROSLER PARKER vibrator Type VR 30 Internal tank dimensions: 1170 x 500 Depth: 500 Lining in good condition. Ksdpfx Aezr Hb Njg Aedu Can be seen in working order at my workshop.

Condition: good (used), For sale: Parker hydraulic power pack, 230V. Kdodpoz Sb D Sefx Ag Asu

Condition: new, Parker Cutting table Cross-cutting, longitudinal cutting, stacking Ksdpfxez I Rhvs Ag Aodu 280x230x100cm New, still in original packaging from the manufacturer! Scope of delivery (see pictures). (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2015, condition: refurbished (used), Laboratory gas generator with a capacity of 12.5 liters/min and a purity of 0.5% residual oxygen. The system was completely overhauled by us, the company Airtech Stickstoff GmbH, as an authorized partner of Parker. We can also take over the service for you. Kdjdpfx Agen R Naue Aou

Condition: like new (used), Max. pressure: 10 bar Max. temperature: -10°C to 50°C Kjdpfx Agozaz T Ds Ajdu Application: Pneumatic control Width: 40 mm Depth: 195 mm Height: 23 mm Weight: 228 g Condition: Like new