Grimme SE 260 UB

Grimme SE 260 UB

Condition: used, Year of construction: 2024, 1 Drawbar coupling, Ø 80 mm 1 Cardan shaft, 1 3/8" with 6 teeth 1 Drive with PTO speed of 540 rpm 1 3-speed gearbox 1 Row spacing 75 cm 1 Pick-up width: 620 mm with narrow crop intake roller 1 Half ridge drums: Ø 390 mm with collar 1 3-blade share, long 1 Separately adjustable middle share instead of middle disc shares 1 Ridge depth adjustment from the terminal 1 TerraControl 1 Automatic ridge centering 1 2 disc shares 1 Sieving channel width 1500 mm 1 1st separating belt, spacing 40 mm 1 1st separating belt with locking connection 1 Spacing-independent friction drive for 1st separating belt with support roller 1 Speed of 1st separating belt - normal 1 V2A sheets in the oscillating frame Pgodpfxj Afimrj Ai Tou 1 Oscillating beaters in the 1st separating belt with speed adjustment from the terminal 1 2nd separating belt, spacing 32 mm 1 2nd separating belt with locking connection 1 Spacing-independent friction drive for 2nd separating belt 1 Coarse crop belt, distance 200 mm 1 Retaining spring at the front of the coarse crop belt, "standard" design 1 2 additional scrapers for the coarse crop belt 1 Belt of the 1st separating unit, spacing 40 mm 1 H-profile hedgehog web for the 1st separating unit 1 Scraper for the 1st separating unit, smooth roller scraper 1 Tilt adjustment for the 1st and 2nd separating units from the terminal 1 Height adjustment of scraper rollers for the 1st separating unit with Bowden cable 1 Slip monitoring for the 1st separating unit and 2nd separating belt 1 2nd separating unit: SB hedgehog web with plates 1 Scraper for the 2nd separating unit, smooth roller / spiral roller scraper 1 Speed adjustment for 2 brush or finger belts from the terminal 1 Speed adjustment for the 1st and 2nd separating units from the terminal 1 Height adjustment of the finger/brush belt by hand 1 Additional feed hoppers, mounted on the right and left 1 Sorting table, wide (930 mm), addition track (280 mm) 1 Sorting belt with entrainment elements 1 Roller pre-cleaning, 5 rollers, infinitely adjustable radially, without container 1 Roller spacing for roller pre-cleaning, 20 mm 1 Discharge belt from roller pre-cleaning to stone bunker 1 Potato turning device (two rollers in the sorting table) 1 Addition track, design with plates 1 Addition track adjustable, differential speed to the sorting table 1 Stone bunker with discharge belt 1 Pre-elevator with ultrasonic sensor 1 6.0 t bunker 1 Bunker belt with fabric 1 Bunker filling automatic system including automatic system for the pre-elevator and filling optimization 1 Bunker top lowering 1 Air brake 1 Speed 40 km/h 1 Automatic axle centering and tilt automatic 1 Tires 800/45R30.5 Vredestein 1 7" monitor and multiplexer of the Grimme video system, up to 8 cameras possible 1 Camera as reversing camera, mounted, incl. lighting 1 Camera transition from the 1st to the 2nd separating unit, mounted, incl. lighting 1 Camera sorting table, mounted, incl. lighting 1 Camera bunker top, mounted, incl. lighting 1 Operator terminal VC 50 + joystick box instead of standard operator terminal 1 Mineral oil 1 Load-Sensing Kit with control line to the tractor 1 Ridge centering via sliding shoe 1 2nd support wheel, left

Condition: used, Year of construction: 2022, 1 Tow ball coupling, Ø 80 mm 1 Cardan shaft, 1 3/8" with 6 teeth 1 Drive with PTO speed of 540 rpm 1 Direct drive 1 Row spacing: 75 cm 1 Intake width: 600 mm 1 Ridging drums: Ø 390 mm 1 3-blade long coulter 1 Separately adjustable central coulter instead of the middle disc coulters 1 Stone protection for the share 1 Digging depth adjustment from the terminal 1 Automatic ridge unloading 1 Automatic ridge center finding 1 2 disc coulters 1 Additional disc coulter on the outside 1 Sieve belt width 1500 mm 1 1st sieve belt, spacing 35 mm 1 1st sieve belt with locking connection 1 Speed-independent friction drive, 1st sieve belt with support roller 1 Speed of 1st sieve belt - normal 1 V2A sheets in the oscillating frame 1 Oscillating beater in the 1st sieve belt with speed adjustment from the terminal 1 2nd sieve belt, spacing 32 mm 1 2nd sieve belt with locking connection Pode Afigrepfx Ai Togu 1 Speed-independent friction drive, 2nd sieve belt 1 Coarse soil band spacing 200 mm 1 Retaining spring at the front of the coarse soil band, design "strong" 1 Band 1st separator, spacing 40 mm 1 H-profile tine bar, 1st separator 1 Scraper for 1st separator, smooth roller scraper 1 Inclination adjustment for 1st and 2nd separators from the terminal 1 Height adjustment of scraper roller for 1st separator from the terminal 1 Slip monitoring for 1st separator and 2nd sieve belt 1 2nd separator: SB tine band with plates 1 Scraper for 2nd separator, smooth roller / spiral roller scraper 1 Speed adjustment for 2 brush or finger bands from the terminal 1 Inclination automation for 1st and 2nd separators 1 Speed adjustment for 1st and 2nd separators from the terminal 1 Height adjustment of the finger / brush band on the left from the terminal 1 Speedtronic-Sep: Automatic speed adjustment of the separators 1 Additional mounted feed hopper on the right and left 1 Sorting table, wide (930 mm), feed hopper (280 mm) 1 Sorting belt with lugs 1 Roller pre-cleaning, 5 rollers, stepless radial adjustment, without container 1 Rollers for roller pre-cleaning, spacing 20 mm 1 Conveyor belt from roller pre-cleaning to stone bunker 1 Feed hopper belt, design "rod band" 1 Feed hopper belt adjustable, differential speed to the sorting table 1 Stone bunker with discharge belt 1 Pre-elevator with ultrasonic sensor 1 6.0 t bunker 1 Bunker belt with fabric 1 Bunker filling automation including automation for pre-elevator and filling optimization 1 Bunker top lowering 1 Potato outlet on the roll bottom bunker for crate filling / drop brake 1 Potato outlet for 1.20 m wide crates 1 Hydraulic folding device for potato outlet 1 Air brake 1 Permissible maximum speed 40 km/h 1 Automatic axle center finding and inclination automation 1 Tire size 710/50-30.5 1 ISOBUS 1 Drive medium: mineral oil 1 Load-Sensing Kit with control line to the tractor

Condition: used, Year of construction: 2022, Tires: 710/50 R30.5, K80 lower linkage, PTO shaft, ISOBUS, load sensing, 75 cm row spacing, separately adjustable center coulter, digging depth adjustment from the terminal, automatic ridge relief, automatic ridge centering, additional sixth disc on the outside, V2A sheets in the oscillating frame, 1st separating belt with 35 mm spacing, 2nd separating belt with 32 mm spacing, 2 additional scrapers for the coarse plant belt, slip monitoring for 1st and 2nd separating device, speed adjustment for 2 brushes or finger belts from the terminal, speed adjustment for 1st and 2nd separating device from the terminal, Speedtronic separation, feed hopper chute additionally mounted on the left and right, picking table with a width of 930 mm, picking belt with carrying elements, mixing belt adjustable, stone bunker with discharge belt, 6.0-ton bunker, automatic bunker filling, bunker top lowering, 40 km/h, automatic axle centering and inclination control, camera system, operator terminal VC 50 + joystick box GBX 871 + GBX 870, cameras + video monitor 7". Pgjdpfxjz Sbfce Ai Tsu