Machining Center - Universal

GROB-WERKE G350

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 5-axis CNC machining center GROB G350a Siemens Sinumerik 840D sl 2 pallets, 2-fold pallet changer Pallet size: 400 x 400 mm Lrodpfxeu Rd T Us Akuol Travels: X: 600 mm Y: 770 mm Z: 805 mm Swivel table A-axis Rotary table with pallet clamping system Grob (B-axis, PW) Milling spindle HSK-A63 Milling spindle drive power: 32/25Kw Max. Torque: 206 Nm Max. Spindle speed: 16,000 rpm Coarse spindle diagnosis GSD Tool magazine with 90 tool slots Tool cleaning device Tool length measurement Renishaw workpiece measurement, RMP60 Machine status light Pallet set-up station, manually rotatable Set-up station door, additional control panel Preparation for hydraulic workpiece clamping system Swivel axis calibration GSC Energy efficiency package EED HAT 8 teach pendant Sinumerik MDynamics technology package - Milling Premium cooling lubricant package - Scraper belt chip conveyor, discharge height 1,100 mm - Filter system - Tank - High pressure pump 80 bar - Low pressure system Coolant cooler 13 kW Compressed air through the spindle center External compressed air supply Oil skimmer for lubricant maintenance Work area floor flushing Blow-out gun, coolant gun Z-axis flushing device Compressed air cleaning bar for safety disk

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected Lrjdjycvaqjpfx Akuel - Geometry measured and all settings adjusted - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: excellent (used), operating hours: 16,800 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,700 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, torque: 822 Nm, controller manufacturer: SIEMENS, controller model: 840D, workpiece length (max.): 1,890 mm, workpiece width (max.): 1,450 mm, table width: 800 mm, table length: 1,000 mm, rotational speed (max.): 6,000 rpm, spindle motor power: 43,000 W, spindle nose: ISO 50 DIN 69871, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MODEL MCH 450 C DOUBLE PALLET 5-AXIS CNC Control: SIEMENS 840D WORKING AREA: X-axis travel (longitudinal): 1600 mm Y-axis travel (vertical): 1200 mm Z-axis travel (transversal): 1700 mm LINEAR GUIDES: Size 55 DRIVE SYSTEM: Diameter x Pitch: 50x25 mm FEED FORCE: X axis (S3-40%): 15,000 N Y axis (S3-40%): 15,000 N Z axis (S3-40%): 17,500 N FEED RATE: Working feed rate (X, Y, Z axes): 1 - 40,000 mm/min Rapid traverse (X, Y, Z axes): 40,000 mm/min Acceleration (X, Y, Z axes): 4.0 m/s² SPINDLE: Front bearing diameter: 100 mm Spindle taper: ISO 50 DIN 69871 Spindle motor power (S1-100% / S6-40%): 28/43 kW from 500 rpm Max torque (S1-100% / S6-40%): 536/822 Nm up to 500 rpm Spindle speed: 45 – 6,000 rpm Positioning: 360° x 0.001° Positioning accuracy Tp as per VDI/DGQ 3441 (angular): s 10 ROTARY TABLE: Positioning: 360° x 0.001° Positioning accuracy Tp as per VDI/DGQ 3441 (angular): s 6 Max clamping weight on pallet: 2,500 daN Max tangential moment: 40,000 Nm Max tilting moment: 34,000 Nm Rotation time 45°: 2.9 s Rotation time 90°: 3.5 s Rotation time 180°: 4.6 s PALLET CHANGER: Coupling surface as per DIN 55201 A1 Pallet dimensions: 800 x 1000 mm Workpiece dimensions: - Positioning diameter in working area x height: 1890 x 1450 mm Pallet change accuracy (X, Y, Z axes): 0.02 mm Pallet change time: 27 s X/Y/Z AXIS POSITIONING ACCURACY: Direct measurement with optical scales Positioning tolerance as per VDI/DGQ 3441: 0.010 mm COOLING UNIT WITH ROTARY VACUUM FILTER – HIGH PRESSURE 70 BAR: Coolant tank capacity: 2,500 l Coolant pump 4 bar, flow rate: 230 l/min Coolant pump 4 bar, flow rate: 70 l/min High-pressure pump 50 bar, flow rate: 28 l/min Lrsdpfx Aksydfcdoujl TOOL CHAIN MAGAZINE WZM 100: Tool magazine positions: 100 Max tool length (from spindle nose): 600 mm Max tool diameter (with adjacent tools): 112 mm Max tool diameter (without adjacent tools): 228 mm EQUIPPED WITH: - Chip conveyor (modified for handling very long chips) - Tool breakage detection - Handwheel (for axis control and movement within the working area) - Tool change in masked time (tools can be loaded/unloaded from magazine automatically without stopping the machine program) USED MACHINE YEAR 2007

Condition: excellent (used), Year of construction: 2007, turning length: 744 mm, turning diameter: 430 mm, spindle bore: 65 mm, Control: CNC path control with 10.4" TFT color display Siemens Sinumerik 840 D powerline TECHNICAL DATA Swing diameter * over bed: 600 mm * over cross slide: 500 mm Distance between main and sub spindle: 975 mm Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar diameter: 65 mm Max. workpiece size with sub spindle: ø 200 x 200 mm Main spindle Drive power: 29 kW Speed range: 0 – 5000 rpm Max. bar capacity: 65 mm Max. chuck size: 200 mm C-axis *resolution: 0.001° Sub spindle Drive power (100/40% ED): 17/22 kW Speed range: 0 – 7000 rpm Max. chuck size: 200 mm Travel (Z-axis): 750 mm C-axis *resolution: 0.001° Upper tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 270 mm * Z-axis: 750 mm * Y-axis: +50 mm Lower tool turret Disc turret with directional logic Number of stations: 12 of which driven: 12 Tool holder DIN 69880 VDI 30 Drive power: 6.7 kW Speed range: 0 – 4000 rpm Travel range * X-axis: 205 mm * Z-axis: 750 mm EQUIPMENT/ACCESSORIES - Fully enclosed guard electrically interlocked, with sliding doors and machine light - IEMCA Master 890 MP bar loader (left side) for bar length 3300 mm, including: guide channel, centering unit, axial movement - Thermocompensation systems for integrated spindle motors (liquid cooled) - Hollow clamping cylinder with draw tube for main spindle - Solid clamping cylinder with draw bar for sub spindle - C-axes for main and sub spindle - Transmit software for easy C-axis programming - Y-axis on the upper turret (cutting force is distributed over 2 axes, resulting in extremely high rigidity) - Drive units in upper and lower turret - Parts ejector and flushing through the sub spindle - Finished parts pick-off device Maximum finished part: ø 65 x 200 mm Maximum finished part weight: 4.5 kg - Conveyor belt for removing finished parts from the machine - Turret steady rest including VDI 30 basic holder, controlled centrally via the coolant supply (14 bar), in the tool turret Clamping diameter range: 10 – 70 mm - Coolant system with 2 high-pressure pumps each at 14 bar and 2 rinsing pumps each at 3.7 bar - Cleaning gun for cleaning clamping devices, covers, and the entire working area with coolant - Swarf conveyor (hinge belt type) in extended version for gantry design, suitable for: long steel chips, chip nests, wool chips, dry and wet machining - Electronic oil mist separator 800 – 1000 m³/h - Automatic central oil lubrication for guideways and ball screws - Grease lubrication for main and sub spindle - Foot pedal for actuation of clamping devices - HAINBUCH collet chuck size 65 for main spindle, without stop (without collets) - HAINBUCH collet chuck size 65 for sub spindle, with stop type 100 (without collets) - 3-color signal lamp (red, green, white) - Serial interface - Mounting elements - Documentation Ledpfx Akeyx U Hieuorl

Condition: excellent (used), Manufacturer, Emco. Machine type, Hyperturn 665 CNC lathe. Inventory number, 22281. Machine designation, Drehmaschine Emco Hyperturn 665. Machine number, serial number R7A Q 2701. Year of manufacture, 2002. Control system, Siemens Sinumerik 840D with PCU 50 V1. Programming, DIN ISO, Siemens ShopTurn capable. Axes configuration, X axis and Z axis. Max turning diameter over bed, approx. 665 mm. Max turning diameter over cross slide, approx. 500 mm. Max turning length, approx. 1,000 mm. Swing diameter, approx. 665 mm. Main spindle. Spindle speed range, up to approx. 4,000 rpm. Spindle nose, DIN standard spindle interface. Spindle motor power, approx. 30 kW. Spindle torque, high torque for soft turning applications. Tool system. Tool turret, CNC controlled turret. Number of tool stations, typically 12 positions. Tool holder type, VDI standard. Live tooling, not included, soft turning configuration. Tailstock, CNC controlled tailstock. Quill diameter, approx. 100 mm. Quill travel, approx. 120 mm. Coolant system, included. Chip conveyor, included. Machine accuracy. Positioning accuracy, approx. 0.01 mm. Repeatability, approx. 0.005 mm. Lrjdpjx S Hghjfx Akuol Electrical supply data. Supply voltage, 400 V. Frequency, 50 Hz. Rated current, 110.00 A. Backup fuse, 125.00 A. Connected load, 56.00 kW. Compressed air requirement, approx. 6 bar. Machine dimensions. Machine length, approx. 4,500 mm. Machine width, approx. 2,200 mm. Machine height, approx. 2,100 mm. Machine weight, approx. 8,000 to 9,000 kg depending on configuration. Application, precision soft turning of steel, aluminum, and non hardened materials.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Description WE OFFER AN NICE CONDITION TWO MACHINES EMCO HYPERTURN 665 WITH BARR FEDERS AND TOOLS ACCESSORIESS YEAR: 2005 FULLY FUNCTIONAL , READY TO WORK CONNECTED ON POWER. FOR THE CUSTOMER WE ORGANIZE DISMANTLING LOADING AND TRANSPORT Description For sale: Well-maintained EMCO Hyperturn 665 MC Plus IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! Lsdpfxevk E Atj Akuerl CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request! TECHNICAL DATA: Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 D46485 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Controlled in 8 axis - x1-x2-z1-z2-c1-c2-y-b axes Accessories: BAR FEDER AND HUGE LIST OF TOLLINGS ON PHOTOS Length: 3400 mm + convoyer , Height: 2300 mm, Width: 2550 mm, Weight: 7600 kg