Universal machining center

GROB-WERKE G550

Condition: used, Year of construction: 2011, Technical details: Djdst Rmd Ispfx Ah Sekg x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm weight of the machine ca.: 17 t dimensions of the machine ca.: 6 x 3 x 3,2 m Diameter of the table: 770 mm max. table load: 800 kg tool taper: HSK-A63 max. tool length: 465 mm no. of tools in magazin: 60 spindle turning speed range: 12.000 U/min feed power: 8 kN kp power capacity: 25/35 kW 5 axis G550-1024 HSK A-63 Grob (Bezeichnung G550-1024): 4529h 1 spindle *

Condition: ready for operation (used), Year of construction: 2017, turning length: 3,000 mm, turning diameter: 1,050 mm, spindle speed (max.): 1,500 rpm, chuck outer diameter: 375 mm, Multitasking Machine OKUMA MULTUS B750 C3000 YEAR2017 OSP-P300SA 15" chuck Dedpfx Aowi Ezrsh Sskg Max Machining dia:1050mm Length:3000mm

Condition: good (used), Year of construction: 2012, Control Heidenhain iTNC 530 Working area: 800 mm x 1020 mm x 970 mm (x/y/z) Table diameter: 630 x 630 mm Table load: 700 kg Workpiece diameter - max.: 900 mm Rotary table (A-/B-axis) A-axis: -185 / +45 ° B-axis: 360 ° Total power requirement: 42 kVA Machine weight approx.: 22 t Chip conveyor Belt filter system - Motor spindle: 16,000 rpm Drive power: 25/35 kw Max. Torque: 160/223 Nm Spindle holder: HSK-A63 Tool changer: 120-position - Measuring probe - Kinematics package - Tool length checking device Dodpforx N Tzox Ah Sokg - BLUM laser measuring system Tool monitoring - electric handwheel - Suction - 80 bar IKZ system

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Dksdpjwr Drnofx Ah Sjg Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Vertical Turret Lathe - Double Column / Brand: SCHIESS BRIGHTON Type: Vertimaster / Year of construction: 2009 The machine can be inspected by appointment. Condition: Fully functional / operational. TECHNICAL DATA: Working area and traverse: - Max. Machining- / Swing diameter: 9.000 mm - Processing height max.: 6.000 mm - Faceplate diameter: 6.000 mm - Passage width between racks/pillars: 8.300 mm Power and torque: - Main drive: 240 KW - Max. Torque on the face plate: 250 kN m - Max. Workpiece weight: 150 tons Boring and milling device: - Power max.: 63 kW - Speed max.: 2.500 rpm - Torque max.: 2.200 Nm Support: - Cross section: 520 x 420 mm - Injection diameter min.: 750 mm - Cutting power at 6 m Diameter max.: 75 kN Dkjdpsxgv Egsfx Ah Sjg EQUIPMENT: - CNC-Control: SIEMENS Sinumerik 840D - Tool holder: SK 50 - Operating platform - Chip conveyor - Documentation - Additional excellent accessories ... There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale. Detailed technical data sheet and information on equipment available on request.

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: G552-2158 U21156, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 970 mm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 80 m/min, torque: 206 Nm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, workpiece diameter (max.): 900 mm, workpiece weight (max.): 700 kg, table load: 800 kg, rotary table diameter: 770 mm, overall weight: 25,700 kg, spindle speed (max.): 16,000 rpm, operating hours of spindle: 5,200 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 126, tool length: 750 mm, Equipment: chip conveyor, Machine Specifications: Model: GROB G550 AB Generation 2 Power Supply: 400V, 50Hz, TN-S Compressed-Air System: Working pressure 5 bar, minimum input pressure 5 bar Automatic Work Area Door for manual and automated loading/unloading Work Area Exhaust System: Decentralized, 800 m³, Filter Grade F9 Machine Protection for Water-Based Cutting Fluids Work Area Lighting Cooling System: Air-cooled chiller unit (11 kW) Dodpfxsv Hdmpj Ah Sekg Control System: Heidenhain TNC 640 with English HMI Swivel Axis Calibration (GSC) Collision Monitoring (DCM) Kinematic Measurement Inspection Equipment Pallet Storage System Interface (Software & Hardware v1.7) Key Features: Tilting Table Unit (A-Axis) & Rotary Table with T-Slots (B-Axis) Motorized Spindle: HSK-A 63, 16,000 RPM, 159/206 Nm, 25/32 kW, Oil-Air Lubrication Double Disk-Type Tool Magazine: HSK-A 63, 126 pockets, supports extra-long tools Laser Measurement System Tool Lift & Tool Cleaning Device Chip Management: Scraper-Type Chip Conveyor, Cutting Fluid Filter System KF220, Cutting Fluid Tank High-Pressure Cutting Fluid Unit (5-40 bar, ICS), Circulating Chiller (13 kW), Air Gun & Flush Gun in Work Area, Compressed Air Feed Through Spindle Center Touch Probe: Renishaw OMP60 Remote Machine Diagnostics with Access Control Switch CE Labeling, Slovenian Documentation & Tags Easy Robot 250 Automation System: Base Unit: ERE Robot Easy MTS 2.0 400, 6-position 250kg Accessories: EWIS Rapid Scan, Comserver Kit Internal Erowa Manual Control Options: Magazine modification, Robodoor & Safety Fences Interfaces: Plug Kit Harting Modular Connector Installation & Training Included Tooling for Automation: MTS Base Plate 410x410x250 P/A Universal (6x) MTS Pallets, Seals, and Chucking Spigot Set MTS Gripperlink Rapid & EWIS Rapid Chip with Chip Holder This GROB G550 is an advanced, fully-equipped machining center ready for high-precision and high-efficiency operations. The Easy Robot 250 system enhances automation capabilities, making it an ideal solution for modern manufacturing environments.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,700 h, Control Unit Brand HEIDENHAIN Model TNC 640 Movement X-Axis Movement 800 mm Y-Axis Movement 950 mm Z-Axis Movement 1020 mm Djdex D D Svspfx Ah Sjkg Additional Equipment Accessories: Additional pallet + coolant cooling unit This 5-axis GROB G550a universal machining centre was manufactured in 2020. It offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this GROB G550a universal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 1981, machine/vehicle number: 78.977, Equipment: documentation/manual, Year of manufacture: 1981 / Year of retrofit: 1996/1997 Control: Siemens 840 C Siemens control for X/Y/Z/W/U/B/V axes Spindle diameter: 200 mm Main motor Siemens: 68 kW Spindle speeds: I gear: 3 - 202 rpm II gear: 180 - 808 rpm X travel: 12,000 mm Y travel: 4,500 mm Z travel: 2,400 mm (supporting sleeve □ 520 mm/travel 1200 mm + W axis 1200 mm) Mount: SK60 (SK50) Facing slide: yes Milling head: 2 units Prepared for CNC rotary table (4th axis) Without rotary table and clamping field (available separately) Full documentation Djdpfxeqc Umgs Ah Sekg Net weight: approx. 140 tons Video available!

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 1020 mm z-travel 970 mm Control TNC640 B - axis 360 x 0,001 ° feed B-axis max. 50,00 U/min A - axis -185 / +45 x 0,001 ° feed A-axis max. 25,00 U/min feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. size of pallet Ø 770 mm workpiece weight 800 kg interference diameter 900 mm total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, measuring probe Heidenhain TS640, electromechanical tool length check, Djdpfxexn Amao Ah Sokg Swivel axis calibration GSC, collision monitoring "DCM Collision", BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set.

Condition: excellent (used), FANUC Professional 6 Control Working travels 900 x 900 x 1020 mm Tool changer with 136 Positions Spindle speeds -10'000 rpm Spindle taper HSK100 2 paletts 630 x 630 mm B-axis 0.001° Palett changer FASTEMS FPC1500 Cooling through spindle Dkedpfxox A E Ens Ah Ssg 3D measuring taper Tool breakage control device Tool lenght measuring device Chip conveyor Misc. accessories MARCELS MASCHINEN AG