Vertical Slotting Machine

GSP M 743

Condition: excellent (used), GSP M 743 mortising machine Fodpfxjulfuze Af Eega Stroke (mm): X450 Y500 Slide travel (mm): 300 Max. table tool distance (mm): 450 Gooseneck (mm) : 590 Slot width 25 30 mn Table diameter (mm): 700 Feed speed (mm/mm): 0.1-2.5mm/Cp Main motor power (HP): 6 Machine equipped with : Automatic feeds/Slide tilting Dimensions WxDxH (mm) : 2300x1700x2600 Machine weight (T) : 3.5 Overall dimensions 2500x 2200 height 2400

Condition: excellent (used), Year of construction: 2007, Doosan Puma 300MC C-axis with driven tools, 360° (0.001°) Year: 2007 Fanuc 21iTB with Manual Guide Chuck: 12 inch (315mm) Samchully Spindle bore: 102mm Max turning diameter: 355mm Axis travels: X - 250mm Z - 680mm Turret: BMT 65 Tailstock Tool probe Chip conveyor, coolant tank with pump Tool holders Fgjdpeyrb Urefx Af Eea Machine documentation Condition: very good

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Fgodpfexln Iwex Af Eja Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: defective spare-parts repository (used), Table size: 1300 x 950 mm Fgedpfeicnk Ejx Af Eea The device is not functional! Chassis for sale,

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. Fedpertrzdofx Af Eega The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Hello, For sale: Slotting Machine type HOV-2S. The machine is operational and in continuous use; inspection and testing are possible. Fgsdexyi Saepfx Af Esa The price listed in the advertisement is net and VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact from 7:00 to 16:00.

Condition: used, Technical details: capacity at 100% ED: 400 A capacity: 60% ED = 500 A welding current: Gleichstrom V weight of the machine approx.: 230 kg capacity: 21 kVA Welding rectifier MIG / MAG Cooling type F Protection class IP 23 insulation class F incl. wire feed device, feed rate 0,5 - 20 m/min Ground cable/pliers Fgedou Nwc Hopfx Af Eea Hose package 4 meters new *

Condition: new, functionality: fully functional, machine/vehicle number: 314567.00, number of clamping sleeves: 1, mount diameter: 30 mm, clamping range: 30 mm, Collets / collet caps / support sleeve for collet device new - unused 5 collet caps for collets, size Ø30, item no. 314567.00 4 collets, size Ø30.0 1 support sleeve for collet, size Ø30 - for Reishauer RZ 301 / RZ 362 from our stock Price / details on request All technical data subject to errors/omissions. Fgsdpfxowccp Hj Af Eja We sell exclusively to countries within the European Community.

Condition: excellent (used), Year of construction: 1998, Control Fanuc OT with electronic handwheel Swing diameter over bed 700 mm Travel path - X 362 mm Travel path - Z 1,055 mm Speed range 1 20–2,000 rpm Chuck diameter 400 mm Tool turret 10 positions Chip conveyor yes Rapid traverse X-axis 16,000 mm/min Rapid traverse Z-axis 20,000 mm/min Fgsdpfx Asyxp Hwof Eoa Total power requirement 50 kW Machine weight approx. 9 t Space requirement approx. 5.1 x 2.4 x 2.3 m Control system CNC Control name FANUC

Condition: new, Year of construction: 2022, functionality: fully functional, mount diameter: 38 mm, clamping range: 38 mm, 2 x Reishauer Clamping Device Base Unit Chuck FK 38 Fjdewzkcxjpfx Af Ejga new - unused suitable for Reishauer gear grinding machine, fitting the spindle for machines RZ 150 / RZ 160 / RZ 260 clamping diameter: 38 mm for max. speed = 3,000 rpm balanced with clamping stroke monitoring / 3-point contact monitoring and provision for additional functions clamping / air supply monitoring / clamping stroke monitoring incl. assembly and operating instructions as well as Reishauer wooden transport container Price / details on request All technical specifications subject to typing errors / mistakes. We sell exclusively to countries within the European Community.