Hurco VMX 42i

Hurco VMX 42i

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,800 h, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: MAX5, overall weight: 6,850 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 42i was manufactured in 2018 and features X, Y, and Z travels of 1067 mm, 610 mm, and 610 mm respectively. It boasts a maximum spindle speed of 12000 rpm. If you are looking to get high-quality milling capabilities consider the Hurco VMX 42i machine we have for sale. Contact us for more information about this machine. • Tool magazine capacity: 30 tools • Spindle hours: approx. 7,800 h (estimated) • Due to the installation of a new hard drive, the spindle hours can no longer be accurately verified. • Machine weight: approx. 6,850 kg • Total power requirement: approx. 28 kVA • Only steel and aluminium have been machined. • Internal coolant system • The machine has a double-wound AC spindle motor. • The axes are also directly driven. • The machine does not have a direct measurement system. Additional equipment • Chip conveyor • WinMax Mill Version V09.01.39314 • Removable handwheel • No Accessories included, but can be purchased at a reasonable price for an additional charge. Software Features Ksdpfx Akjy Tw R Hjwenb Adaptipath: Trochoidal milling for higher removal rates, controlled engagement, and residual material detectionDialog / NC Mix: Allows mixing of Dialog and NC programsNCPP (Industry Standard Software): • ISNC extended NC mode for FANUC compatibility (FANUC 0) • Parameter and MACRO programming • Subprogram technology for NC modeUlti-Motion: • Dynamic Lookahead (up to 10,000 blocks) • Improved surface quality via "Motion Control Technology" • Reduced cycle times and machine wearStandard Features: • Simulation graphics • Pocket milling with islands • Synchronous tapping (without compensation chuck) Hardware Components & Accessories • Cooling & Chips: • High-pressure coolant system (Through-Spindle Coolant) at 20 bar (Emulsion type) • Spindle cooler • Standard coolant system with spray gun • Chip conveyor and flushing system for chip removal • Chip splash guard cabin • Tooling: Integrated hydraulic tool clamping system • Workspace: • LED machine light • Signal light for operating statuswith deep-hole drilling cycle function Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,400 mm, table length: 3,900 mm, table width: 2,400 mm, warranty duration: 24 months, power: 37 kW (50.31 HP), OMAX 55100 TiltaJET, 37 kW EnduroMAX pump and TiltaJET for perfectly perpendicular cuts Factory-refurbished with manufacturer certification and a two-year warranty! The configuration of the waterjet cutting system can be freely selected. Feel free to contact us with your individual configuration requirements. Customers searching for efficient and highly precise waterjet cutting systems will find their solution within the OMAX premium line. These powerful and extremely precise machines combine operational flexibility with the highest precision in the waterjet cutting sector. The systems can be equipped with a comprehensive range of accessories tailored to your specific cutting tasks. OMAX waterjet cutting systems are revolutionizing tool and mold making as well as single-part and series production. They are also widely used in various areas of mechanical and plant engineering. Financing via leasing is available upon request under highly attractive conditions, e.g. for up to 86 months. - Accuracy up to ± 0.02 mm - Machine components and software are up to date with the latest OMAX technology With the TiltaJET swiveling cutting head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swiveling head automatically compensates for taper errors at the cut edge, regardless of the selected quality level or cutting speed. The machine is factory-refurbished; therefore, images may vary from the actual offer. Prompt delivery can be arranged with INNOMAX AG. Knedpsrm Imnofx Akwjb

Condition: like new (used), Year of construction: 2018, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: HURCO MAX5, overall weight: 6,500 kg, spindle speed (min.): 12,000 rpm, operating hours of spindle: 3,900 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, The machine is in like-new condition and ready for immediate use. Kodpfx Akozuxidswenb A video can be sent upon request.

Condition: excellent (used), Year of construction: 2018, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Kodpjzmy T Usfx Akwonb Tool magazine for 30 tools, SK 40 Internal coolant system Chip conveyor Detachable handwheel

Condition: excellent (used), functionality: fully functional, For sale: this lathe, currently connected and available for testing. Accessories for the machine included. A video of the machine can be sent via WhatsApp upon request. Knjdpfev Nw A Njx Akwjb Swing over bed: 1050 mm Distance between centers: 6000 mm Swing over carriage: 840 mm

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm Knsdezguhyjpfx Akweb input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Knodozguh Hepfx Akwjb Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Hurco MAX 5 control with WinMax software

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 780 mm, travel distance Z-axis: 780 mm, total height: 31,500 mm, Equipment: documentation/manual, rotational speed infinitely variable, Dear customer, we have an Okuma MA 500 HB 6APC in good condition in stock for you. We look forward to your inquiry and remain with best regards, Your Neff - The Okuma Specialist Team Data sheet: Control: OSP P200-M Travel paths X-axis: [mm] 900 Y-axis: [mm]: 780 Z-axis: [mm]: 780 B-axis: [degrees] 1; 360 degree incrementation Tool changer 200 ATC MAS BT50 Tool positions: 200 Tool holder: MAS BT50 Maximum tool weight: [Kg] 500 Maximum tool length: [mm] 450 Main spindle Max. speed: [1/min] 6,000 Drive power: [kW] 33 Pallet station 6 APC Pallet dimensions: [mm] 500×500 Workpiece weight: [Kg] 950 Workpiece size: [mm] 800×1000 Other features: – Renishaw Probe – Renishaw Tool Break Control – Mayfran Concept with high pressure pump Knedpfx Asvta Sbekweb Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, viewing in our showroom including demonstration and Acceptance, loading, transport, assembly and commissioning of the machine as well as instructions and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit our homepage.

Condition: excellent (used), Year of construction: 2019, Winmax V10 X-axis: 1,067 mm Y-axis: 610 mm Z-axis: 610 mm Table size: 1,270 × 610 mm Tool holder: SK40 (DIN 69871) Max. speed: 12,000 rpm Drive power (S1/S6): approx. 15 / 22 kW ICS (internal coolant supply): 20 bar Separate coolant tank with paper band filter Rapid traverse X/Y/Z: 35 m/min (X/Y), 30 m/min (Z) Capacity: 40 tools Tool change time: tool-to-tool approx. 2 s Max. tool diameter: 80 mm (next to free slot: up to 125 mm) Max. tool length: 300 mm Knedpfx Aswt N Tgjkwsb Max. tool weight: 7 kg Machine weight: approx. 6,900 kg Required space (W × D × H): approx. 4,600 × 3,900 × 2,800 mm Spindle nose to table: 150 – 760 mm Table surface to floor: approx. 900 mm

Condition: ready for operation (used), Year of construction: 2014, operating hours: 12,000 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,067 mm Travel range, Y-axis: 610 mm Travel range, Z-axis: 610 mm Number of axes: 3 Spindle speed: 12,000 rpm Drive power: 12 kW Knjdpfozapr Usx Akwob Torque: 237 Nm Table size, X-axis: 1,270 mm Table size, Y-axis: 610 mm MACHINE DETAILS Number of tools in the magazine: 30 Tool holder: SK40 Operating hours: 12,000 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: new, Year of construction: 2026, Metalclean - P100 spray cleaning system in stainless steel 1-tank spray cleaning system with rotating basket. With oil separator, pneumatic system with diaphragm pump. - Basket diameter 970 mm - Usable internal height 540 mm - Basket load capacity 200 kg - Filling volume 210 L Includes accessories: - Direct drive - Level control - Lid locking - Chip/particle filter with bath cover plate Spray pressure = 5 bar Operating voltage = 3 x 400 V/N/PE 50 Hz Kjdpfx Akoir Aqdewsnb Fume extraction

Condition: ready for operation (used), Year of construction: 2018, operating hours: 7,200 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco MAX 5 mit WinMax Software, TECHNICAL DETAILS Travel range X-axis: 1,067 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Number of axes: 3 Number of tools in the magazine: 30 Tool holder: SK40 Table size X-axis: 1,270 mm Table size Y-axis: 610 mm MACHINE DETAILS Control system: Hurco MAX 5 with WinMax software Drive power: 12 kW Torque: 237 Nm Knodpfx Ajzaprzekwob Operating hours: approx. 7,200 h EQUIPMENT Internal coolant supply Spindle cooler

Condition: excellent (used), Year of construction: 2014, Winmax control system Travel ranges X/Y/Z: 1,067 x 610 x 610 mm Spindle speed: 12,000 rpm Kodpfx Aozam E Ejkwenb Tool magazine for 24 tools, SK 40 Internal coolant system Chip conveyor Removable handwheel

Condition: good (used), Year of construction: 2005, Hurco - VMX30 - 3-Axis Machining Center Year of build 2005 Serial number H-30516 Knjdeu A Dnpspfx Akwjb Travel x-axis 760mm Travel y-axis 510mm Travel z-axis 510mm T-slot fixture table size W 510mm T-slot fixture table size L 1510mm Engine power (kW) 11kW Machine weight 4800kg

Condition: used, Year of construction: 2013, operating hours: 12,000 h, Hurco VMX42i WinMax control Table clamping surface 1270 x 610 mm Table load 1750 kg Travel X axis 1067 mm y-axis 610 mm z axis 610 mm Tool holder SK 40 Spindle speed max rpm 12000 Spindle power max 18 KW Tool changer 30 times Knjdpfx Ajri N A Hskwjb Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Coolant tank 484 liter