Vertical machining center

HWACHEON VESTA-1000/12K

Condition: good (used), Year of construction: 2016, In good technical condition and fully functional. Built in 2016. Machine includes 4-axis TSUDAKOMA, workpiece probe, and tool probe. Drives Axis drives (X/Y/Z) 1,000 / 550 / 500 mm Distance table surface - spindle surface 130 - 630 mm Kljdpfx Ahex Tti Ssujl Axis guide - linear rolling LM Table work surface 1,100 x 502 mm Load capacity 700 kg Table surface configuration mm 5x T-slot (width 18, pitch 80) Maximum spindle speed 12,000 rpm Spindle power (10 min./continuous) kW 18.5 / 11 Rapid feeds (X/Y/Z) m/min 36 / 36 / 30 Working feed (X/Y/Z) mm/min 1 - 24,000 Sliding motor (X/Z) kW 1.8 / 1.8 / 3.0 Automatic tool change Tool taper - BT40 Clamping bolt - MAS P40T-1 (45°) Number of tool positions: 24 Max. tool diameter mm Ø 80 / Ø 150 (without secondary tool) Max. tool length / weight mm / kg 300 / 8 Tool-to-tool change time: Section 2.5 Chip-to-chip change time: Section 4.3 Magazine and change disk design with rotating arm Power consumption: 30 kVA Tank capacity for spindle lubrication/cooling: l 6 / 20 For cooling emulsions: l 380 Machine dimensions: Height mm 2,670 Floor area (length x width) mm 3,335 x 2,200 Weight: 6,500 kg Control system: Fanuc 0i-MD Air blowing of the spindle Machine adjustment elements Machine protective cover Screw conveyor in the work area Cooling system Safety door Ethernet interface

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, Technical Data VESTA-1000/12K Travels Axis travels (X/Y/Z) mm: 1,000 / 550 / 500 Distance table surface – spindle nose mm: 130 – 630 Axis guideways: Linear rolling LM guides Table Working surface mm: 1,100 x 502 Maximum load kg: 700 Table configuration mm: 5x T-slots (width 18 mm, pitch 80 mm) Spindle Maximum speed rpm: 12,000 Spindle power (10 min / continuous) kW: 18.5 / 11 Feeds Rapid traverse (X/Y/Z) m/min: 36 / 36 / 30 Working feed (X/Y/Z) mm/min: 1 – 24,000 Feed motor (X/Y/Z) kW: 1.8 / 1.8 / 3.0 Automatic Tool Changer Tool taper: BT40 Pull stud: MAS P40T-1 (45°) Klodpfx Ahjx Rzhdsuel Number of tool stations pcs: 24 Max. tool diameter mm: Ø 80 / Ø 150 (without adjacent tool) Max. tool length / weight mm / kg: 300 / 8 Tool-to-tool change time sec: 2.5 Chip-to-chip change time sec: 4.3 Magazine & changer type: Disc magazine with rotary arm Power Supply Connected load kVA: 30 Tank Capacities For spindle lubrication/cooling l: 6 / 20 For coolant l: 380 Machine Dimensions Height mm: 2,670 Floor space (L x W) mm: 3,335 x 2,200 Weight kg: 6,500 Control System Fanuc 0i-MD Standard Equipment - Spindle air purge - Machine alignment elements - Machine protective guarding - Auger conveyor in working area - Cooling system - Safety doors - Ethernet interface - CNC system software options by HWACHEON: - OPTIMA (feedrate optimization) - HAI (40-block memory, AI nano contour control) - HTLD (tool load monitoring) - HTDC (thermal displacement compensation for spindle and machine frame [HTDC=HSDC+HFDC]) - HECC (accuracy or speed preference in machining) - Centralized lubrication system - Lubricant oil evacuation to dedicated tank - Electronic handwheel - Operating documentation in Czech - Pneumatic system - Program capacity: 1,280m (512kb) - Rigid tapping - 3-color status signal light - Spindle jacket cooling - Air dryer (included) - Work area lighting - 10.4" color LCD display - CE certificate - Transformer - Through-spindle coolant 30 bar - Manual Guide i - Chip conveyor - Workpiece and tool probes - 4th axis direct control by Fanuc CNC system via M-codes (or independent controller usable for another machine)